Parts for Ge PGS920SEF2SS: Control Panel & Cooktop Parts

This control knob restores smooth, precise operation of your range or cooktop controls. Replace a worn, cracked, or missing knob to regain confident grip and accurate setting of heat levels and functions.

• Attaches to the control valve or switch shaft to select burner/oven settings
• Provides clear pointer alignment for accurate adjustments
• Common symptoms include cracking, stripping, wobbling, slipping, or falling off
• Restores the look and usability of the control panel

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off; avoid prying against the control panel
• Align the new knob with the shaft orientation (flat/spline) and press straight on until fully seated
• Reinstall any model-specific trim/escutcheon pieces before fitting the knob

This upper panel manifold routes gas to the appliance's burner assembly, restoring proper gas distribution for reliable ignition and heat control. Use when the manifold is cracked, corroded, or leaking to help restore safe burner operation. What it does

• Directs gas from the supply to the correct burner ports for even flame delivery
• Replaces manifolds that are cracked, corroded, or otherwise leaking gas
• Helps address intermittent or non-igniting burners when manifold damage or blockage is present
• Works with the appliance's valves and burner assembly to maintain proper gas flow

• One upper panel manifold

• Turn off the appliance gas supply and electrical power before starting work
• Use approved fittings and gas-rated thread sealant where required; check for leaks after installation
• Inspect related components (burner valves, gaskets, tubing) and replace as needed

Size: 8 - 32 inch.

This ground harness is a short wire assembly that connects an appliance's metal chassis to the electrical grounding system, helping ensure safe operation and reduce the risk of electric shock. It replaces a worn or damaged ground lead to restore proper grounding. What it does:

• Provides a secure path to ground between the appliance frame and the house grounding conductor
• Helps prevent electrical faults from energizing the chassis
• Commonly needed if the original wire is corroded, frayed, or has a broken terminal
• Supports safe operation after repairs that require re-establishing chassis ground

• One ground harness (wire lead) as shown

• Install only with the appliance disconnected from power; follow all safety guidelines
• Attach to the designated grounding point on the chassis and to the appliance ground or terminal using the provided or existing fasteners
• Use appropriate tools and replace any damaged connectors
• No additional parts are included unless explicitly listed

This metal mounting bracket secures the appliance's manifold/panel assembly, keeping valves and controls properly aligned so the range or cooktop operates reliably and without excess vibration or movement. What it does:

• Provides a stable mounting point for the manifold and control panel assembly
• Keeps gas valves and control components aligned to prevent stress or misalignment
• Stops panel movement and reduces rattling or looseness during use
• Helps maintain correct spacing for valve and ignitor connections

• Disconnect power and gas supply before servicing gas appliances; follow appliance-specific safety procedures
• Use appropriate fasteners and torque; confirm bracket is seated before reassembly
• Wear gloves to protect from sharp sheet-metal edges

This replacement pan-head screw is used in refrigerators to fasten panels, brackets, and covers so they stay tight and properly aligned. Replace a missing or damaged screw to restore a solid, rattle-free fit.

• Secures interior/exterior panels, brackets, trim, and covers
• Replaces missing, stripped, or corroded hardware
• Helps maintain proper alignment of attached components

• Disconnect power before servicing; shut off water if working near water lines
• Match location to the original fastener and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal

• Thread size: #8-18 (type AB)
• Length: 1/2 inch
• Head style: Pan head, Phillips drive

A cast-iron side grate that supports cookware on a gas cooktop side burner, restoring stable, level cooking. Replace a damaged or missing side grate to stop wobbling and let pots and pans sit securely at the burner. What it does:

• Provides a stable surface for pots and pans on the cooktop's side burner to improve cooking stability.
• Heavy-duty cast-iron construction resists normal cooktop heat and wear.
• Replaces cracked, chipped, warped, or missing side grates that cause wobbling or unstable cookware.
• Restores proper burner access and seating for safe, even cooking on compatible gas cooktops.

• Ensure the cooktop and burners are completely cool and, if applicable, the gas supply is off before handling.
• Remove the old grate and set the replacement grate into place; most installations require no tools—verify the grate sits flat and aligns with the burner.
• Use gloves to protect your hands; do not force the grate if it won't seat—inspect for obstructions or damage that may prevent proper fit.

This range top is the replacement cooktop surface that restores a flat, finished cooking area and secures burners and grates for safe stovetop use. It returns a damaged or worn cooktop to normal operation. What it does:

• Provides the finished surface that supports burners, grates, and cookware
• Restores proper alignment and spacing for burner assemblies
• Helps eliminate rattling, uneven pans, or exposed mounting hardware
• Useful when the original cooktop is cracked, warped, or cosmetically damaged

• Disconnect power and gas supply before starting work
• Handle carefully to avoid scratching or chipping finished surfaces
• Keep hardware organized

The Glass & Touch Board Assembly is an OEM part for GE ranges. This primary control interface features a glass panel with touch controls that allow users to select cooking modes, set temperatures, and adjust various oven settings.

Causes of a bad Glass & Touch Board Assembly can include electrical issues, damage from impact or spills, or general wear over time.  

Symptoms of a faulty Glass & Touch Board Assembly include:

• Unresponsive or intermittently working touch controls
• Flickering or blank display
• Oven not responding to inputs or settings
• Error codes or unusual behavior

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the gas burner to help distribute the flame evenly for better cooking performance. This cap is crucial for achieving precise temperature control and consistent heating, ensuring that food cooks evenly across the cookware.

Symptoms of a bad Burner Cap Assembly include:

• Uneven flame distribution, leading to uneven cooking or heating.
• Difficulty igniting the burner, or the flame going out unexpectedly.
• Visible signs of wear, such as warping, discoloration, or chipping of the burner cap.

Causes of a bad burner cap can include accumulation of food particles or cleaning products that clog the ports, physical damage from impact or dropping, or general deterioration from regular exposure to high temperatures.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It is designed to sit atop the burner base, helping to distribute the flame evenly across the cooking surface. The cap also serves to protect the burner head from spills and debris, which can clog the gas outlets.

Symptoms of a bad Burner Cap Assembly include:

• Uneven flame distribution, which can cause uneven cooking or take longer to heat food.
• Difficulty lighting the burner, or the flame going out unexpectedly.
• Visible signs of wear like chipping, warping, or discoloration.

Causes of a bad burner cap can include accumulation of spilled foods or cleaning chemicals, which might block the gas flow, and normal wear and tear from high-temperature exposure that can alter the shape or integrity of the cap.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the burner head and serves to distribute the flame evenly across the surface, enhancing cooking efficiency and consistency.

Symptoms of a faulty burner cap assembly include:

• Uneven flame distribution or a yellow or orange flame.
• Difficulty igniting the burner.
• Excessive soot or unburned gas smell, indicating incomplete combustion.

The common causes of issues with the burner cap assembly include misalignment, food spillage clogging the ports, or wear and tear from regular use. These can affect the flow of gas and air, leading to inefficient combustion and poor cooking performance.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This central burner cap covers the center of a gas burner to shape the flame and protect the burner head. Replacing a worn or missing cap restores proper ignition, even flame, and clean cooktop performance.

• Directs the center flame for more even heat distribution
• Shields the burner head/igniter area from spills and drafts
• Helps ensure consistent ignition when properly seated
• Common symptoms: uneven or yellow flames, delayed ignition, sooting, or a chipped/warped cap

• Turn all burner controls off and let the surface cool completely
• Lift off the old cap; clean and dry the burner head surface
• Center the new cap on the burner head so it sits flat with no rocking or gaps
• Test the burner; if the flame is uneven or lifting, re-seat the cap until level

The Small Surface Burner is an OEM part for GE ranges and cooktops. It provides a consistent heat source for cooking, designed for use with smaller cookware, making it ideal for simmering and precise heating tasks.

You should replace the small surface burner if it becomes damaged or worn out. Causes of a bad surface burner can include regular wear and tear, spills, and exposure to high temperatures. A defective burner can lead to uneven heating or failure to ignite properly.

Symptoms of a bad Small Surface Burner include:

• The burner not igniting or taking a long time to ignite
• Uneven flame distribution
• The burner not producing heat at the expected levels

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tri-Ring Burner Assembly is an OEM part for GE gas cooktops and ranges. It contains the three front right burners, grates, and supporting brackets.

Causes of a bad burner assembly can include cracked or warped burner heads from prolonged heat exposure. Deterioration of internal gas pipes and orifices may also diminish flame and heating performance.

Symptoms of a bad Tri-Ring Assembly include:

• Unstable, yellowish, or excessively large flames that cannot be adjusted
• Burners that cannot be ignited or controlled independently
• Improper alignment causing imbalanced pans or spills
• Leakage or gas smells detected around the burner cavities

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore branded appliances.

The Oval Burner Assembly is an OEM part for GE ranges. This part provides an even heat distribution across the cooktop, facilitating efficient cooking with its distinctive oval shape.

Common causes of a bad burner assembly include normal wear and tear, clogging due to food debris, or damage from overheating or impact.

Symptoms of a bad Oval Burner Assembly include:

• Inconsistent flame or uneven heating
• Burner not igniting or maintaining a flame
• Visible damage or deformities on the burner
• Unusual odors or gas leaks when the burner is in use

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Base is an OEM part for GE ranges and cooktops, designed to securely hold the burner and distribute gas evenly for cooking. This part serves as the foundation for the gas burner, ensuring a stable and consistent flame that can be adjusted for precise cooking temperatures. 

Causes of a bad Burner Base can include corrosion, clogging from spilled foods or liquids, and general wear and tear over time. A damaged or deteriorated burner base can affect the flame's quality, leading to uneven cooking or, in some cases, posing a safety hazard.

Symptoms of a bad Burner Base include:

• Uneven flame or poor heat distribution
• Difficulty igniting the burner
• A yellow or orange flame instead of blue
• Gas leakage smell when the burner is on

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is the outer burner cap for a sealed gas burner. It covers the burner's outer ring to shape a steady flame, protect the burner head from spills, and help ensure consistent ignition and even cooking results.

• Shapes and distributes the flame around the outer ring for balanced heating
• Promotes reliable ignition when properly centered and seated
• Shields burner head and ports from spills and debris that can affect performance
• Replace if the cap is chipped, warped, or missing; symptoms can include yellow/uneven flames, sooting, or repeated clicking/delayed ignition

• Disconnect power and allow the cooktop/range to cool before servicing
• Lift off the old cap; clean the burner head and seating surface
• Position the new cap flat and centered; it should sit level and not rock
• Light the burner to verify a steady, blue flame; reposition if needed

A small metal lock washer that secures fasteners and helps prevent nuts or bolts from loosening under vibration. Fits specific GE appliances where a locking washer is required to keep assemblies tight and stable. What it does:

• Provides a locking grip under a nut or head of a bolt to resist loosening from vibration
• Helps maintain secure connections on panels, brackets, or components
• Can stop intermittent rattling or movement caused by a loose fastener
• Used wherever the original equipment calls for a retaining/lock washer

• One lock washer as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate tools (needle-nose pliers or small wrench) and replace only in the original orientation
• Do not over-tighten fasteners — tighten just enough to compress the washer and engage locking feature
• Keep small parts away from children and pets

This is a replacement 8-18 x 5/16 machine screw used to secure appliance panels and components. It restores proper fastener fit so parts stay mounted and operate safely. What it does:

• Fastens panels, brackets, and small components where an 8-18 x 5/16 screw is specified
• Prevents loose parts, rattling, and misalignment caused by missing or worn screws
• Provides the correct thread size and length for reliable reattachment
• Works wherever the OEM calls for this specific 8-18 x 5/16 screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to threads or mounting surfaces
• If replacing multiple fasteners, use matching screws to maintain proper fit and function

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

• Excessive noise
• Difficulty in sliding the drawer
• Misalignment
• Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This vent trim is a replacement trim piece that finishes the vent opening on compatible GE appliances, restoring a clean, finished appearance and helping direct airflow at the vent. It's a simple exterior part that refreshes the look and fit of the vent area. What it does:

• Covers and finishes the vent opening to restore a clean, factory appearance
• Secures the vent edge and helps maintain trim alignment
• Hides damage or wear to the original trim without altering ventilation function
• Commonly replaced when the original trim is dented, cracked, loose or missing

• Disconnect power to the appliance before beginning work and follow all safety precautions.
• Basic hand tools are typically required; handle trim carefully to avoid scratching the finish.
• Check orientation and fit against the vent opening before final fastening.
• Replace damaged or missing mounting hardware or clips with the correct OEM fasteners.

The Foam Tape is an OEM part for GE gas ranges. It serves as a sealant, ensuring a proper fit and preventing the escape of heat and gases from the range. This tape helps maintain the efficiency of the range by providing an airtight seal around various components.

Causes of a bad Foam Tape can include wear and tear over time, exposure to high temperatures, or physical damage during cleaning or maintenance. When the foam tape degrades, it can compromise the range's performance and safety.

Symptoms of a bad Foam Tape include:

• Heat escaping from the range
• Gas odors near the appliance
• Visible wear or gaps in the seal
• Decreased cooking efficiency

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This reversible griddle provides a flat cooking surface on one side and a ridged grill surface on the other, letting you sear or griddle foods directly over the range for versatile stovetop cooking. What it does:

• Replaces a missing or damaged griddle to restore flat and ridged cooking options.
• Allows even contact with pans and food for consistent browning and searing.
• Helps reduce flare-ups by keeping food elevated on the ridged side when grilling.
• Useful when foods stick, cook unevenly, or when the original griddle is warped or cracked.

• Handle carefully; item may be heavy and edges can be sharp. Use gloves if needed.
• Clean thoroughly before first use according to your range manual and the griddle care instructions.
• Preheat to the appropriate temperature before cooking; avoid sudden thermal shock (do not immerse a hot griddle in cold water).
• Follow your appliance manufacturer's instructions for placement and safe operation.

This trilobular screw secures appliance panels and internal components, restoring a tight, rattle-free fit. Replace missing or stripped hardware to keep assemblies aligned and safely fastened during everyday use.

• Secures brackets, panels, trim, and other appliance components
• Helps maintain proper alignment to reduce vibration and rattling
• Replaces missing, damaged, or stripped mounting hardware
• Can address loose panels or gaps noticed after service or cleaning

• Disconnect power at the breaker; for gas appliances, also shut off the gas supply
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• If the original used a washer or clip, transfer it to the new screw