Parts for Ge PP989DN5BB: Control Panel & Cooktop Parts

If your electric cooktop burner won't adjust temperature or stays on one heat level, this infinite switch restores variable heat control for safe cooking.

Burner stuck on high or won't heat? This infinite switch controls surface element temperature from low to high. Straightforward repair restores heat control.

Wire guard for cooktop burner assembly. Protects wiring and components from heat damage. Replace if bent, broken, or missing for proper protection.

Replace a worn or missing surface burner knob to restore smooth, accurate heat control. This black knob presses onto the surface element switch shaft so you can turn the element on and select cooking temperatures with confidence.

• Attaches to the surface element switch shaft to control On/Off and heat levels
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob slips, won't stay on, or is hard to set accurately
• Black finish maintains the original appearance

• Turn all controls Off and allow the cooktop to cool before servicing
• Pull the old knob straight off the switch shaft—do not twist or pry the shaft
• Align the new knob with the shaft and press straight on until fully seated
• Verify smooth rotation through the settings before use

Cooktop element not heating or stuck on? This infinite switch controls surface element temperature. Direct replacement part for electric cooktops.

Replace your cooktop indicator light lens when cracked, discolored, or dim. Restores visibility of heating element status. Confirm fit with your model.

Replace your cooktop indicator light lens when cracked, discolored, or dim. Restores visibility of burner status lights. Verify fit with your model number.

Downdraft fan not working? This fan switch activates the ventilation system. Moderately difficult repair—requires lifting cooktop to access mounting plate.

Replace your cooktop's selector knob if cracked, broken, or missing. This glossy black control knob installs on the control panel to operate settings.

This wire cover protects the terminal wiring on a radiant cooktop element, helping keep connections insulated and routed away from heat and sharp edges for safer, more reliable operation. What it does:

• Shields and insulates element terminal wires from heat and abrasion
• Keeps wires routed securely to reduce strain and prevent loose connections
• Helps prevent shorting or arcing caused by exposed or chafed wiring
• Commonly replaced when wiring is burned, cracked, or displaced
• Supports stable operation of the radiant surface element

• Always disconnect power at the breaker before accessing the cooktop or element
• Handle the glass cooktop and terminals carefully to avoid cracks or injury
• Slide the cover into place over the element terminals and verify wires are fully seated and routed away from hot surfaces
• If terminals, wires, or the cover show heat damage, replace the damaged components rather than reusing them

Wire junction box housing for cooktops. Protects electrical connections beneath the cooking surface. Replace if cracked, damaged, or missing.

Burner won't heat or heats unevenly? This 6 inch radiant element restores consistent cooking performance. Typical DIY repair takes 30-45 minutes.

Burner won't heat or only inner ring works? This dual radiant element restores both heating zones on your cooktop. Moderate DIY with basic tools.

Heater spring for electric cooktops. Secures heating element in place. Replace if spring is broken, stretched, or missing to properly mount the element.

Threaded mounting stud secures your cooktop to the countertop or cabinet. Replace if stripped, broken, or missing to properly anchor the unit.

Foam seal tape creates an airtight barrier between your cooktop and countertop, preventing spills from dripping into cabinets. Replace when worn or gaps appear.

Installation kit for cooktops. Includes hardware and components needed to properly mount and secure your cooktop during installation or replacement.