Parts for Electrolux EFLS210TIS00: Control Panel / Dispenser Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This control panel is the user interface assembly that lets you select cycles, change settings and view status on your appliance. It replaces a cracked, unresponsive, or malfunctioning front control surface to restore normal operation. What it does:

• Houses the touchpad/buttons and display that register user input and show cycle/status information
• Transmits commands to the appliance control board so selections and cycles run as intended
• Commonly replaced for unresponsive buttons, faded or blank display, or erratic control behavior
• Restores control access when the original panel is physically damaged or no longer functions

• Disconnect power (unplug appliance or shut off breaker) before beginning service
• Handle the panel gently to avoid scratching or cracking the display and cover
• Verify connector orientation and seat wiring harnesses fully during reassembly

This control panel is the user-facing interface that houses the appliance's buttons and display, restoring visible controls and allowing normal selection of cycles and settings. It replaces cracked, faded, or unresponsive front-panel surfaces. What it does:

• Provides the tactile buttons and display area used to select cycles, options and settings
• Restores visible labels and touch areas so controls respond and are readable
• Addresses symptoms like faded/crested markings, physical damage, or a loose front panel
• Works with the appliance's existing electronics and mounting hardware to re-establish normal operation

• Disconnect power before starting and follow all safety precautions
• Handle with care to avoid scratching the display or trim pieces
• Some installations require removal of trim or bezels; use appropriate hand tools

This push button replaces a worn, cracked, or missing control-panel button so your appliance's front controls are easy to press and responsive again. It restores user input for selecting cycles and settings. What it does

• Replaces a broken or missing control-panel push button used to select cycles, options, or settings
• Restores a firm, tactile press and reliable contact for the front control interface
• Helps fix buttons that stick, feel mushy, or no longer latch properly
• Compatible with snap-in/button-style control panels that accept this replacement

• Disconnect power to the appliance before attempting service to reduce shock risk
• Most installs are snap-in replacements accessible from the control panel; remove trim or panel as needed
• Use a non-marring tool or fingertip pressure to pry the old button out and press the new button into place

Tension spring restores proper door and mechanism movement in washers and dryers. Replace if door won't close smoothly or mechanisms feel loose. Verify fit with your model number.

This diffuser directs and spreads chilled air inside the refrigerator compartment for more even cooling and better food preservation. It replaces a worn or cracked diffuser to restore proper airflow distribution and reduce hot spots. What it does:

• Channels and diffuses cold air from the evaporator into the cabinet for more uniform temperatures
• Helps prevent localized warm spots that can cause premature food spoilage
• Restores proper airflow when the original diffuser is cracked, broken, or missing
• Reduces airflow noise caused by loose or damaged diffuser pieces

• Always unplug the appliance or shut off power at the breaker before servicing
• Typically installs without tools; may require removing shelves or trim to access the mounting area
• Handle the part carefully to avoid cracking the plastic during installation

This is a three-way water inlet valve that controls the flow of hot, cold, and bleach water into the washing machine tub during the wash and rinse cycles. It opens and closes electronically based on signals from the control board. Replace this valve if the washer is not filling with water, filling slowly, leaking from the back, or if water continues to trickle into the tub when the machine is off.

This is a single water inlet valve designed for the washer's detergent dispenser system. It controls the flow of water into the dispenser compartment during the wash cycle. Replace this valve if your washer is not filling the dispenser properly, leaks water when off, or fails to dispense detergent or fabric softener at the correct time.

If your washer overfills, underfills, or won't advance cycles, the pressure switch may have failed. This water level sensor uses air pressure sensing.

Fixes washer with no power, no lights, or unresponsive controls. This electronic control board manages all wash cycles and motor functions.

Fix a washer that won't start, stops mid-cycle, or shows error codes with a new electronic control board. Moderate repair requires basic tools.

Control panel not responding or washer won't start? This electronic control board manages all major functions. Restores operation when the board fails.

This replacement flap is the airflow damper that helps direct and regulate cold air inside the refrigerator for consistent cooling. Replacing a cracked or stuck flap restores proper airflow and helps maintain even temperatures. What it does:

• Opens and closes to control airflow between compartments for proper circulation
• Prevents warm air from entering when closed, helping interior temperature stability
• Stops rattling or scraping noises caused by a broken or loose flap
• Helps ensure even cooling when the refrigerator cycles

• One replacement flap

• Disconnect power before starting any repair to avoid electrical shock
• Remove interior panels or shelves as needed to access the damper area; keep track of screws and clips
• Inspect surrounding ducts, hinges, and clips and replace any damaged fasteners for a secure fit

Washer siphon tube routes water to prevent pooling and ensure proper drainage. Replace if water collects or drains slowly. Confirm fit with your model.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This conveyor assembly moves items along the appliance's internal track to enable smooth operation and reliable part movement. Replacing a worn or damaged conveyor restores proper transport and reduces binding or misfeeds. What it does:

• Translates motor motion into linear movement across the appliance's track or rack
• Helps maintain consistent item positioning during cycles
• Commonly linked to symptoms like items not advancing, grinding or scraping noises, and visible belt wear
• Supports related components that rely on steady travel for correct operation

• Disconnect power to the appliance before beginning any repair
• Follow OEM instructions for removal and installation
• Require basic hand tools; keep track of fasteners and alignment during reassembly
• If you see damaged mounting hardware or related parts, replace them to ensure secure installation

Replace a cracked or clogged syphon assembly that's causing water pooling in your washer. This drain component channels water away from critical areas.

This is a pull-out dispenser drawer for a washing machine that holds detergent, fabric softener, or bleach. It channels cleaning agents into the wash drum at the correct point in the cycle. Replace this drawer if it is cracked, warped, clogged with detergent buildup, or no longer slides in and out properly.

This wiring harness connects refrigerator control components and delivers power and signals between modules so affected features work reliably. It replaces a damaged or worn harness to restore proper electrical connections. What it does

• Provides factory-style electrical connections between control boards, sensors, and powered components
• Restores lost or intermittent power and signal paths that can cause feature failures
• Prevents erratic operation caused by frayed wires, broken terminals, or corroded connectors
• Matches OEM routing and connector types to ensure correct fit and function

• Disconnect power to the appliance before beginning any repair
• Compare the new harness to the old one to ensure connector types and routing
• Route harness along original clips and secure all connectors until they click
• Avoid stretching wires; use proper tools and replace any damaged mounting clips

This wiring harness routes power and signals between the appliance control and components to restore reliable electrical connections and proper function. It replaces a damaged or broken connector assembly to help resolve control or power issues. What it does:

• Provides the factory routing and connection points between the control board and affected components
• Restores secure electrical connections when wires are frayed, burnt, or connectors are loose
• Can resolve intermittent power, non-responsive controls, or specific function failures caused by wiring faults
• Uses factory-style terminals and connectors for a direct-fit repair when installed correctly

• Disconnect power before inspecting or replacing the harness to avoid shock or damage
• Match connector shapes and pin counts; do not force connectors together
• Route and secure the harness along original clips and channels to prevent rubbing or heat exposure
• If corrosion, melting, or other damage is extensive, inspect adjoining components and boards for related damage

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.