Parts for Electrolux FPBM3077RFB: 03 - Control Panel, Door, Misc Parts

The Control Assembly is an OEM part for Frigidaire built-in microwave ovens. Mounted on the front face, this panel houses integrated buttons and displays for operation functions.

Causes involve typical wear-absorbing contact forces through countless cooking cycles. Chemical residue from steam cleaning may also degrade resilient contact elements and labeling legibility inside over prolonged use.

Symptoms of a bad control assembly include:  

• Stuck, unresponsive, or incorrectly labeled buttons
• Flickering or dimmed digital displays  
• Loose fastenings compromising water protection

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Control Assembly is an OEM part for Frigidaire built-in microwave ovens. Mounted on the front face, this panel houses integrated buttons and displays for operation functions.

Causes involve typical wear-absorbing contact forces through countless cooking cycles. Chemical residue from steam cleaning may also degrade resilient contact elements and labeling legibility inside over prolonged use.

Symptoms of a bad control assembly include:  

• Stuck, unresponsive, or incorrectly labeled buttons
• Flickering or dimmed digital displays  
• Loose fastenings compromising water protection

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This electronic control board replaces the refrigerator's main logic board to restore control of cooling cycles and user interface functions. It provides the control signals that run the compressor, fans, defrost and dispenser/ice features. What it does:

• Manages compressor, evaporator fan and defrost heater timing to maintain proper cooling
• Interprets inputs from the user interface and sensors to run cycles and displays
• Can resolve symptoms like no cooling, no defrost, unresponsive controls or erratic operation
• Works as the central logic/relay hub that sends power and signals to subsystem components

• One electronic control board (PC board) as shown

• Disconnect power before starting; verify replacement part number matches the board on your appliance
• Handle by the edges and avoid static discharge; do not bend or touch components
• Reconnect all harnesses and secure mounting fasteners; double-check wire placement before restoring power

This replacement part is a door. This part is commonly found in various types of microwaves. The door seals the appliance shut so that food and other items can be heated safely.A new door might be needed if the current one is no longer able to shut. The appliance may no longer work at all if the door cannot shut. This should be a fairly simple repair and should only require common household tools such as a screwdriver or pliers if the previous door is stuck.This is a genuine OEM replacement part made by Frigidaire and is sold individually.

The Door Trim is an OEM part for Frigidaire microwaves. As an accent piece affixed to the outer door frame, it contributes to the overall appearance and aesthetic of the appliance.

Causes of a damaged door trim can include wear from extended opening and closing loosening adhesive bonds, impact damage detaching perimeter pieces, or discoloration/ cracks affecting its visual appearance over time.

Symptoms of a faulty door trim involve: 

• Gaps or separation from the door frame
• Loose, flaking, or discolored trim sections  
• Protruding edges present risk of cuts or snags

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

This door latch is the replacement latch assembly that secures and releases the appliance door for proper closing and sealing. Replacing a worn or broken latch helps restore reliable door closure and safe operation. What it does

• Engages and holds the appliance door closed to maintain an effective seal
• Releases the door when actuated so the door opens as intended
• Commonly replaces latches that are cracked, loose, or fail to catch
• Helps address issues like doors that won't stay shut or that sag when closed

• One door latch assembly

• Disconnect power before performing service to reduce risk of electric shock
• Use basic hand tools; access may require removing the door panel or trim
• Verify alignment and secure mounting screws so the latch operates smoothly

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

The Handle is an OEM part for Frigidaire microwaves. It provides the means for opening and closing the microwave door. The handle plays an important role in accessing the cooking cavity in a safe and convenient manner.

Causes of a bad handle can include damage or cracks from excessive opening and closing of the microwave door over time. 

Symptoms of a bad handle include:

• Looseness or unable to firmly grasp the handle  
• Cracks or breaks that compromise grip ability
• Difficulty or inability to fully open or close the door

Overuse and mishandling can cause the plastic to weaken or crack. Replace yours today with this genuine OEM Frigidaire replacement to restore complete functionality and usability to your microwave.  

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
 

This PC Board is an OEM part for Frigidaire microwaves. It is a critical electronic component that regulates and controls various functions of the microwave, such as the power settings, timer, and cooking modes.

The malfunctioning of a microwave's PC board can be attributed to electrical surges, normal wear and tear, exposure to moisture, or electrical faults within the microwave. These issues can lead to a decrease in the microwave's efficiency and functionality.

Symptoms of a failing PC board  include:

• Inconsistent cooking or heating performance.
• The microwave fails to start or abruptly stops during operation.
• The control panel is unresponsive or displaying error codes.
• Difficulty in adjusting the microwave settings.
• The microwave exhibits unusual behavior, such as starting without input.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

A tempered glass refrigerator shelf that provides a sturdy, easy-to-clean surface for food storage and organization. Designed to replace a damaged or missing shelf and restore usable storage space. What it does:

• Holds food and containers securely on a flat, stable surface
• Restores proper shelf spacing and storage flexibility after breakage
• Resists stains and wipes clean for simple maintenance
• Helps maintain even airflow and organization inside the compartment

• Remove all items from the compartment before installation
• Slide shelf into the support rails or brackets until fully seated and stable
• Handle tempered glass carefully; avoid impacts or dropping during installation
• If supplying shelves with metal trim or clips, verify they are aligned with the cabinet supports