Parts for Frigidaire CGMV176NTDB: Control Panel / Door / Misc. Parts

This electronic control panel provides the user interface and touch/keypad controls for the appliance, restoring normal operation of cycle selection and display feedback. It replaces a damaged or unresponsive front console to regain control functions. What it does:

• Houses the buttons/touchpad and display circuitry used to select cycles, set temperatures and timers
• Replaces a cracked, faded, or physically damaged control surface
• Restores response when touch keys or buttons no longer register inputs
• Can resolve missing or blank display segments and intermittent control behavior
• Helps eliminate error codes caused by a faulty console connection or damaged keypad

• Disconnect power before servicing to avoid shock and prevent damage to electronics
• Handle the panel and display carefully; avoid flexing or touching circuit contacts
• Some disassembly of the console or trim is required; keep screws and small parts organized
• Test operation after installation and verify all buttons and display elements function

This electronic control panel replaces the front user interface for your range or oven, restoring button control and display feedback so you can set temperatures, timers, and cooking modes reliably. What it does:

• Replaces the touchpad/display assembly that sends settings to the oven control board
• Restores response to keypad presses and menu navigation when the old panel is unresponsive or intermittently working
• Replaces a panel with cracked glass, stuck buttons, or display/indicator problems
• Helps regain normal control of bake, broil, timer and clock functions when the interface is faulty

• Always disconnect power to the appliance before beginning service
• Handle the glass and ribbon cable carefully to avoid damage
• Verify this part number matches the one on your appliance before ordering

The Door Assembly is an OEM part for Frigidaire microwaves. It is responsible for providing a secure closure for the microwave, ensuring safety and efficient operation. It features a clear window for easy monitoring of your food while it's cooking and a handle for convenient opening and closing.

A bad door assembly can occur due to accidental damage, wear and tear over time, or improper handling. Signs of a faulty assembly include a loose or misaligned door, difficulty in opening or closing, or a broken window.

Symptoms of a bad door assembly include:

• A loose or misaligned door 
• Difficulty in opening or closing the door
• A broken or foggy window that obstructs visibility

Replace your damaged or worn-out microwave door assembly with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This genuine replacement part is a microwave door assembly. The microwave door assembly consists of the components that make up the microwave door. Over time, a microwave door can become damaged after excessive use. If the door is no longer opening or closing properly or is visibly cracked or damaged, it will need to be replaced. To replace the door assembly, make sure the microwave is unplugged. After it has been powered off, proceed to locate the hinges that attach the door to the frame of the microwave. Once located, find the screws that secure the door to the hinges and begin to unthread the screws. Once removed, lift the door off from its hinges and set it to the sign. Take the new door and line it up with its mounting hinges. Thread the screws to secure the door. Make sure to test the door by opening and closing it, if it opens and closes smoothly then the installation was a success.This OEM part is sourced directly from the manufacturer and is sold individually. It is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand washers.

This genuine replacement part is a microwave door assembly. The microwave door assembly consists of the components that make up the microwave door. Over time, a microwave door can become damaged after excessive use. If the door is no longer opening or closing properly or is visibly cracked or damaged, it will need to be replaced. To replace the door assembly, make sure the microwave is unplugged. After it has been powered off, proceed to locate the hinges that attach the door to the frame of the microwave. Once located, find the screws that secure the door to the hinges and begin to unthread the screws. Once removed, lift the door off from its hinges and set it to the sign. Take the new door and line it up with its mounting hinges. Thread the screws to secure the door. Make sure to test the door by opening and closing it, if it opens and closes smoothly then the installation was a success.This OEM part is sourced directly from the manufacturer and is sold individually. It is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand washers.

This Frame is an OEM part for Frigidaire microwaves. Designed to provide structural integrity and aesthetic appeal, this frame is a crucial component for the proper alignment and protection of the microwave's door and interface. 

The degradation of a microwave frame can occur due to physical impacts, frequent usage, material fatigue, or environmental factors. A compromised frame can affect the door alignment, sealing, and overall look of the microwave.

Symptoms of a bad frame include:

• Difficulty in opening or closing the microwave door.
• A visible gap or misalignment of the door.
• Cracks or breakages on the frame itself.
• Unusual noises when the door is in operation.
• The door not sealing properly, leading to heat loss or inefficient cooking.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Door Latch is an OEM part for Frigidaire microwaves. It is a component that secures the microwave door closed during cooking functions and prevents it from accidentally opening. The latch is designed with a sturdy spring-loaded mechanism to provide a secure seal around the door opening.

Causes of a bad latch can include wear and tear over time, damage from repeated use, or failure of the latch spring or locking mechanism.

Symptoms of a bad microwave door latch include:

• The door not closing or latching securely
• Difficulty or inability to lock the door closed
• The door popping or swinging open during a cooking cycle
• Reduced power or inability to operate cooking functions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This replacement outer refrigerator door handle restores a secure grip and smooth opening for affected doors. It replaces a cracked, loose or broken handle so you can open the fridge safely and confidently. What it does:

• Provides a sturdy grip point for opening the refrigerator door
• Replaces cracked, broken or worn handles that won't secure to the door
• Stops the handle from wobbling or pulling away from the door surface
• Helps restore normal door operation and reduce accidental slippage

• One outer refrigerator door handle

• Unplug the appliance or shut off power to the unit before starting work
• Support the door while removing and installing the handle to avoid damage or tipping
• Installation typically requires common hand tools; follow OEM instructions for fastener locations
• Replace with manufacturer-specified fasteners

This is a direct-fit replacement refrigerator door handle that restores a secure grip and the finished look of your appliance. Designed to replace a worn, cracked, or broken door pull so the door opens and closes reliably. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces handles that are cracked, loose, or cosmetically damaged
• Helps restore proper door leverage to prevent strain on latch and hinges
• Matches OEM fit and mounting points for straightforward replacement

• Basic hand tools required; follow your refrigerator's service manual for disassembly steps
• Keep power off and remove any removable shelves or trays for safe access
• Handle and mounting screws may be secured behind a trim piece—do not force parts

This replacement door handle restores a solid grip and smooth opening for a refrigerator door. It replaces a cracked, broken, or loose handle so you can open the door confidently and protect the door edge from further damage. What it does:

• Provides a secure grip to open and close the refrigerator door
• Replaces handles that are cracked, split, loose, or missing
• Helps protect the door surface and finish from wear at the pull point
• Matches the original mounting points for a direct swap on compatible units

• High-level, user-installable: remove the old handle hardware, align the new handle, and fasten with the original screws or hardware
• Use the correct screws and torque to avoid stripping or cracking the handle
• Always unplug or power off the appliance or follow manufacturer safety instructions if required for your model

The Microwave Door Handle is an OEM part for Frigidaire microwaves. It provides the grasping point that allows access to the microwave cavity. 

Causes of a bad handle can be normal wear over many cycles of use. Physical damage from impacts or accidental mishandling can also cause issues.  

Symptoms of a bad microwave door handle include:

• The handle being difficult to open the microwave door
• The handle not staying in the open or closed position
• Looseness or wobbling of the handle
• Cracks or breaks in the plastic housing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.