Parts for Frigidaire CGMV17WNVFA: Control Panel,Door,Misc. Parts

This control panel is the user interface assembly for the oven/range that houses the touchpads, display and main controls so you can select cook functions and see status at a glance. It restores responsive buttons and readable display feedback. What it does:

• Provides the front console with control buttons and display for oven/range operation
• Routes user commands to the oven's control board so selections like bake, broil, timer and temp are registered
• Restores tactile or touchpad responsiveness and readable LED/LCD feedback when the original panel fails
• Resolves symptoms such as unresponsive buttons, missing display characters, or incorrect on-screen information

• One control panel (console assembly) as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the assembly carefully to avoid damaging the display or attached ribbon/wire connectors
• Installation typically requires removing the oven/range back or front access panels and unplugging the control connectors

This electronic control panel provides the user interface and touch/keypad controls for the appliance, restoring normal operation of cycle selection and display feedback. It replaces a damaged or unresponsive front console to regain control functions. What it does:

• Houses the buttons/touchpad and display circuitry used to select cycles, set temperatures and timers
• Replaces a cracked, faded, or physically damaged control surface
• Restores response when touch keys or buttons no longer register inputs
• Can resolve missing or blank display segments and intermittent control behavior
• Helps eliminate error codes caused by a faulty console connection or damaged keypad

• Disconnect power before servicing to avoid shock and prevent damage to electronics
• Handle the panel and display carefully; avoid flexing or touching circuit contacts
• Some disassembly of the console or trim is required; keep screws and small parts organized
• Test operation after installation and verify all buttons and display elements function

This electronic control panel replaces the front user interface for your range or oven, restoring button control and display feedback so you can set temperatures, timers, and cooking modes reliably. What it does:

• Replaces the touchpad/display assembly that sends settings to the oven control board
• Restores response to keypad presses and menu navigation when the old panel is unresponsive or intermittently working
• Replaces a panel with cracked glass, stuck buttons, or display/indicator problems
• Helps regain normal control of bake, broil, timer and clock functions when the interface is faulty

• Always disconnect power to the appliance before beginning service
• Handle the glass and ribbon cable carefully to avoid damage
• Verify this part number matches the one on your appliance before ordering

This electronic control board manages the appliance's user controls and timing functions so the unit operates according to selected settings. Replacing a faulty board restores control panel responsiveness and cycle sequencing. What it does:

• Receives input from the control panel and sends signals to motors, valves, and heaters
• Controls cycle timing, display readouts, and user-selected options
• Can stop appliance from starting or responding when failed
• Can cause incorrect cycles, no display, or intermittently unresponsive controls

• Disconnect power to the appliance before beginning any work
• Handle board by edges and avoid static discharge; use grounding strap if available
• Verify the part number on the old board matches this part before installation

The Door Assembly is an OEM part for Frigidaire microwaves. It is responsible for providing a secure closure for the microwave, ensuring safety and efficient operation. It features a clear window for easy monitoring of your food while it's cooking and a handle for convenient opening and closing.

A bad door assembly can occur due to accidental damage, wear and tear over time, or improper handling. Signs of a faulty assembly include a loose or misaligned door, difficulty in opening or closing, or a broken window.

Symptoms of a bad door assembly include:

• A loose or misaligned door 
• Difficulty in opening or closing the door
• A broken or foggy window that obstructs visibility

Replace your damaged or worn-out microwave door assembly with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This Frame is an OEM part for Frigidaire microwaves. Designed to provide structural integrity and aesthetic appeal, this frame is a crucial component for the proper alignment and protection of the microwave's door and interface. 

The degradation of a microwave frame can occur due to physical impacts, frequent usage, material fatigue, or environmental factors. A compromised frame can affect the door alignment, sealing, and overall look of the microwave.

Symptoms of a bad frame include:

• Difficulty in opening or closing the microwave door.
• A visible gap or misalignment of the door.
• Cracks or breakages on the frame itself.
• Unusual noises when the door is in operation.
• The door not sealing properly, leading to heat loss or inefficient cooking.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Door Latch is an OEM part for Frigidaire microwaves. It is a component that secures the microwave door closed during cooking functions and prevents it from accidentally opening. The latch is designed with a sturdy spring-loaded mechanism to provide a secure seal around the door opening.

Causes of a bad latch can include wear and tear over time, damage from repeated use, or failure of the latch spring or locking mechanism.

Symptoms of a bad microwave door latch include:

• The door not closing or latching securely
• Difficulty or inability to lock the door closed
• The door popping or swinging open during a cooking cycle
• Reduced power or inability to operate cooking functions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This is a direct-fit replacement refrigerator door handle that restores a secure grip and the finished look of your appliance. Designed to replace a worn, cracked, or broken door pull so the door opens and closes reliably. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces handles that are cracked, loose, or cosmetically damaged
• Helps restore proper door leverage to prevent strain on latch and hinges
• Matches OEM fit and mounting points for straightforward replacement

• Basic hand tools required; follow your refrigerator's service manual for disassembly steps
• Keep power off and remove any removable shelves or trays for safe access
• Handle and mounting screws may be secured behind a trim piece—do not force parts

The Microwave Door Handle is an OEM part for Frigidaire microwaves. It provides the grasping point that allows access to the microwave cavity. 

Causes of a bad handle can be normal wear over many cycles of use. Physical damage from impacts or accidental mishandling can also cause issues.  

Symptoms of a bad microwave door handle include:

• The handle being difficult to open the microwave door
• The handle not staying in the open or closed position
• Looseness or wobbling of the handle
• Cracks or breaks in the plastic housing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.