Parts for Frigidaire DGMV174KFC: 05 - Control Panel,Door,Miscellaneous Parts

This electronic control board manages the refrigerator's user interface and automatic functions so temperatures, defrost cycles and compressor operation run correctly. Replacing a faulty board restores control response and normal cycle timing. What it does:

• Controls user interface, display readouts and button inputs
• Manages compressor and fan run/duty cycles for cooling control
• Runs defrost timing and heater operation when applicable
• Can cause symptoms like blank or flashing display, unresponsive controls, or intermittent cooling when failed

• Disconnect power to the appliance before servicing to avoid shock
• Handle board by edges and avoid static discharge; use ESD protection if available
• Follow OEM service manual instructions for mounting and connector routing

A small 3mm x 8mm fastener used to secure panels, brackets, and small components. Replacing a missing or damaged screw helps restore proper fit and reduces vibration or loose parts. What it does:

• Secures trim, panels, brackets or small component mounts.
• Keeps parts aligned so doors and panels fit correctly.
• Stops rattling or vibration caused by loose hardware.
• Useful when a screw is stripped, missing, or damaged.

• Disconnect power or unplug the appliance before you service it.
• Use the correct screwdriver or bit to avoid stripping the head.
• Thread the screw in by hand first, then snug—do not overtighten.
• Keep small parts away from children and dispose of old fasteners properly.

This complete door assembly replaces a damaged or worn refrigerator door to restore proper sealing and operation. It comes preassembled to simplify replacement and help keep cold air inside for efficient cooling. What it does:

• Replaces a cracked, dented, or warped door to restore the unit's exterior fit and finish
• Helps re-establish a solid door seal to reduce temperature loss and frost buildup
• Restores proper door alignment and latching so the appliance opens and closes correctly
• Addresses visible damage and water/drip issues caused by door deformation

• One complete door assembly as shown

• Basic mechanical skill recommended; some disassembly of the cabinet and removal of trim may be required
• Keep power off and remove contents from the door before starting; support the door to prevent dropping
• Use appropriate tools to transfer hinges, gaskets, and any door-mounted components if not factory-installed
• If door-mounted electronics or ice/water components are present, verify electrical connections are disconnected and reconnected per OEM instructions

This complete door assembly replaces a damaged or worn refrigerator door to restore proper sealing and operation. It comes preassembled to simplify replacement and help keep cold air inside for efficient cooling. What it does:

• Replaces a cracked, dented, or warped door to restore the unit's exterior fit and finish
• Helps re-establish a solid door seal to reduce temperature loss and frost buildup
• Restores proper door alignment and latching so the appliance opens and closes correctly
• Addresses visible damage and water/drip issues caused by door deformation

• One complete door assembly as shown

• Basic mechanical skill recommended; some disassembly of the cabinet and removal of trim may be required
• Keep power off and remove contents from the door before starting; support the door to prevent dropping
• Use appropriate tools to transfer hinges, gaskets, and any door-mounted components if not factory-installed
• If door-mounted electronics or ice/water components are present, verify electrical connections are disconnected and reconnected per OEM instructions

The Latch is an OEM part for Frigidaire microwaves. This latch keeps the microwave door securely closed during operation, ensuring the appliance functions safely and effectively. It also interacts with the door switches to ensure the microwave does not operate unless the door is properly closed.

Causes of a bad door latch can include regular wear and tear, physical damage from forceful closing, or mechanical failure.  

Symptoms of a bad microwave door latch include:

• The door not staying closed or securely latched
• The microwave not starting or stopping unexpectedly
• Difficulty in opening or closing the door
• The microwave running when the door is not fully closed

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This door latch spring restores the return tension in your microwave's door release mechanism so the latch engages and releases correctly. Replacing a fatigued or broken spring helps ensure safe door operation and reliable interlock switch activation.

• Provides the return force for the latch lever/door release button
• Helps door hooks engage fully and release smoothly
• Supports proper interlock switch actuation so the unit will run only when the door is closed
• Typical failure signs: door won't latch, "open/close door" error, door button sticks, or needing to hold the door shut to start

• Disconnect power. Microwaves can retain dangerous high voltage even when unplugged; discharge the capacitor
• Access the latch assembly behind the control panel; note the spring's orientation and attachment points
• Use needle-nose pliers to install without overstretching; inspect the latch lever and door hooks for wear
• Verify proper door closure and interlock switch operation before reassembly

This replacement hardware mounting fastener secures panels, doors or trim on select Frigidaire appliances to restore stable attachment and reduce vibration. It's a direct-replacement style component used where factory fasteners have worn or been lost. What it does:

• Secures appliance panels, trim pieces, doors or drawers to the cabinet or frame
• Restores proper alignment and reduces rattling or vibration noises
• Prevents loose parts that can catch or rub during operation
• Helps maintain a tight seal and smooth operation of moving components

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Use the correct-size screwdriver or socket; avoid overtightening which can strip threads or damage trim
• Keep removed fasteners and small parts contained to prevent loss during reassembly
• Replace all matching pieces for even fit and alignment

A replacement unified-thread screw used to secure appliance panels and internal components. Provides a direct fastener to restore secure attachment when original screws are missing, damaged, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and other appliance components that use a unified-thread screw.
• Restores secure mounting to reduce rattling, movement, or misalignment of parts.
• Replaces stripped, rusted, or missing screws to help maintain safe operation.
• Works where the appliance's service manual or parts diagram specifies a unified-thread fastening point.

• Disconnect power and water before servicing for safety.
• Use the correct screwdriver or bit to avoid stripping the head; install by hand until started, then snug—do not overtighten.
• Replace like-for-like: match thread type and length to the removed screw to ensure proper fit and function.
• If other fasteners show corrosion or damage, inspect nearby hardware and replace as needed.