Parts for Frigidaire FFMV1645TBA: 03 - Control Panel, Door, Misc Parts

This control panel is the user interface assembly that houses the oven/range touchpads and display, restoring visible controls and programmed settings so you can select bake, broil and other cooking functions. What it does

• Provides the front console with touchpads, clock/timer and display for selecting oven/range functions
• Sends user commands to the oven control so bake, broil, timer and other cycles operate
• Restores readable display and responsive buttons when the panel is cracked, faded or unresponsive
• Helps resolve symptoms like unresponsive touchpads, blank or garbled display, or missing clock/timer readout

• 1 control panel (user interface/console) as shown

• Disconnect power to the appliance before servicing to avoid electrical shock
• Some installations require removing the backguard or control housing and disconnecting wiring harnesses; handle the display and finish carefully
• Use proper tools and keep track of screws/fasteners
• Secure fasteners before restoring power

This is the refrigerator control panel that provides the user interface for settings and status feedback, restoring clear button access and readable indicators so you can adjust temps and features easily. What it does:

• Houses the buttons/touch pads and display used to change settings and view status
• Replaces a cracked, faded, or non-responsive front panel
• Restores readable indicator lights and button feedback for normal operation
• Helps address symptoms like unresponsive controls, missing labels, or damaged faceplate

• Disconnect power to the appliance before beginning any service
• Remove surrounding trim and mounting fasteners to access the panel; handle with care to avoid cracking
• Reconnect wiring harnesses securely and test functions before reassembling

This electronic control board replaces the refrigerator's main circuit board to restore control of functions and display operation. It manages timed cycles and user inputs so the appliance responds correctly to settings. What it does

• Receives signals from the user interface and sends commands to components.
• Controls defrost and cooling cycles; failures can cause display errors or unresponsive controls.
• Common symptoms: unlit or flashing display, buttons that don't work, erratic cooling or defrost behavior.
• Replacing the board often resolves control-related faults when wiring and sensors are otherwise good.

• One electronic control board.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Handle the board by edges and avoid static discharge; ground yourself or use an ESD strap.
• Verify connectors and wiring harness seating before and after installation; do not force connectors.
• If problems persist after replacement, check related sensors, harnesses, and fuses — the board only controls signals it receives.

This is a complete outer refrigerator door assembly that restores the exterior panel and closure surface for a damaged or dented door. It returns the appliance to a finished appearance and provides a proper mating surface for the door seal. What it does:

• Replaces a dented, cracked, or bent outer door panel to improve appearance and function
• Restores the door's mating surface so the gasket can seal properly
• Helps stop drafts and temperature loss caused by damaged or warped doors
• Provides the correct mounting surface for the handle and hinge hardware

• One (1) complete outer door assembly

• Power is not required for this mechanical replacement, but unplug the appliance or disconnect power at the breaker before working near electrical components
• Support the door fully during removal and installation; doors can be heavy and awkward
• Transfer handles, trim, hinge hardware, or liners only if required and as directed by the OEM instructions
• Follow OEM instructions for hinge alignment and gasket seating to ensure proper closure

This console control panel is the front trim piece that houses the range's user controls and display, restoring a clean, finished appearance and protecting the underlying electronics. It's a direct-replacement exterior panel used on compatible Frigidaire ranges. What it does:

• Provides the visible surface and mounting area for control buttons, knobs, and the display
• Protects the control assembly from spills, heat, and everyday wear
• Restores a worn, cracked, or faded console so controls are easy to read and use
• Helps maintain proper alignment of switches and indicators for reliable operation

• One console control panel (front trim) — panel only

• Remove power to the appliance before servicing to avoid shock or injury
• Installation typically requires removing the backguard or inner console screws and detaching control components; handle the display and ribbon cables with care
• Use proper fasteners and alignment to prevent gaps or stress on controls

This front control panel provides the user interface for your appliance, protecting switches and displaying settings while keeping controls organized and accessible. It restores a clean, functional console surface. What it does:

• Replaces damaged or worn control surface to return a tidy, usable interface
• Protects underlying switches and electronic controls from spills and debris
• Helps restore clearly visible button/label layout for easier operation
• Helps resolve issues with stuck or unreadable controls caused by panel damage

• One front control panel

• Disconnect power before attempting any repair to avoid shock or damage
• Remove screws or clips securing the old panel, then lift out and unplug any connectors
• Align and reconnect wiring harnesses, then secure the replacement panel with the original fasteners

The Door Latch is an OEM part for Frigidaire microwaves. It is a component that secures the microwave door closed during cooking functions and prevents it from accidentally opening. The latch is designed with a sturdy spring-loaded mechanism to provide a secure seal around the door opening.

Causes of a bad latch can include wear and tear over time, damage from repeated use, or failure of the latch spring or locking mechanism.

Symptoms of a bad microwave door latch include:

• The door not closing or latching securely
• Difficulty or inability to lock the door closed
• The door popping or swinging open during a cooking cycle
• Reduced power or inability to operate cooking functions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

The Handle is an OEM part for Frigidaire countertop microwaves. It allows for convenient opening and closing of the microwave door. Made from plastic, it is designed to withstand years of use while maintaining a secure grip. 

Causes of a bad handle can include cracks or breaks from heavy use over time, or damage due to impact or forceful pulling. Repeated excess heat exposure may also cause warping.

Symptoms of a handle needing replacement include:

• Difficulty opening or closing the door securely   
• Loose, wobbly, or unstable door movement  
• Sharp/rough edges presenting a safety hazard
• Cracks, breaks, or lack of integrity in plastic construction

This Genuine OEM Frigidaire handle is compatible with Electrolux, Westinghouse, and some Kenmore microwaves as well.