Parts for Frigidaire FGMO226NUDA: Control Panel,Door Parts

This control panel is the user interface console that houses the touchpads and display for oven/range functions, restoring reliable control and visible status for cooking cycles and settings. What it does:

• Provides the buttons/touchpads and display used to set bake, broil, timer, clock, and other oven functions
• Relays user commands to the range's electronic control board so selected cycles start and stop
• Shows oven status, temperature readouts, and error messages via the display
• Common replacement when buttons stop responding, display is dim or unreadable, or the console is cracked

• One control panel (user interface console) assembly

• Disconnect power at the breaker before servicing to avoid shock; verify power is off.
• Some installations require removing trim and disconnecting wire harnesses—handle display and connectors carefully.
• Do not attempt repair with live power connected.

This electronic control panel is the front user interface that lets you set and monitor oven functions, temperature and timers for your range or wall oven. It restores button control and display feedback so the appliance responds correctly to settings. What it does:

• Replaces a cracked, burnt or non-responsive control panel to restore user input and display functions
• Returns control over bake, broil, timer and clock settings when buttons or touchpads fail
• Fixes symptoms such as unresponsive keys, blank or flickering display, or intermittent control behavior
• Works as the main interface between the user and the oven's electronic control

• One control panel user interface assembly

• Disconnect electrical power to the appliance at the breaker before starting
• Handle display and fascia carefully to avoid scratching or cracking glass/plastics
• Basic tools are typically required; alignment and connector seating must be checked during reassembly

This control panel is the front console fascia for your range/oven that houses the user controls and display, restoring the unit's appearance and providing the mounting surface for buttons and indicators. What it does:

• Provides the front mounting surface for the control buttons, touchpad or knobs and display window
• Protects underlying electronics and wiring from spills and debris
• Restores a broken, cracked or cosmetically damaged console to normal use
• Re-establishes firm button/knob alignment and reliable access to oven/range functions

• Disconnect power to the appliance at the breaker before starting work
• Use basic hand tools; avoid sharp force on the display window or plastic clips
• Handle the panel carefully to prevent scratching or cracking during installation

This control panel is the user interface console that lets you select and monitor oven settings and features. Replacing a damaged or unresponsive console restores clear button operation and readable display feedback. What it does:

• Houses the touchpads/buttons and display used to set cook modes, temperature, and timers
• Sends user commands to the oven's control board so selected functions run properly
• Commonly replaces panels that are cracked, worn, have unresponsive buttons, or show incorrect display output
• Helps resolve intermittent or non-working front-panel controls when the issue is isolated to the console

• One control panel (console) as shown

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Basic disassembly of the oven door or console bezel may be required; handle the display and membrane gently
• Only install parts that match your model number; refer to your manual or parts diagram for exact fit

This electronic control panel is the front user interface that lets you set and monitor oven functions, temperature and timers for your range or wall oven. It restores button control and display feedback so the appliance responds correctly to settings. What it does:

• Replaces a cracked, burnt or non-responsive control panel to restore user input and display functions
• Returns control over bake, broil, timer and clock settings when buttons or touchpads fail
• Fixes symptoms such as unresponsive keys, blank or flickering display, or intermittent control behavior
• Works as the main interface between the user and the oven's electronic control

• One control panel user interface assembly

• Disconnect electrical power to the appliance at the breaker before starting
• Handle display and fascia carefully to avoid scratching or cracking glass/plastics
• Basic tools are typically required; alignment and connector seating must be checked during reassembly

This replacement control panel restores the front user interface and display for your range/oven, letting you select cooking modes, set timers and adjust temperatures. It replaces a cracked, unresponsive, or malfunctioning control surface. What it does:

• Houses the touchpad/buttons and display used to program cooking functions and timers
• Sends user inputs to the oven control board so bake, broil and other modes start correctly
• Common symptom fixer: replaces panels with stuck, non-responsive, or visually damaged buttons
• Resolves intermittent or blank display issues caused by a damaged panel or keypad

• Disconnect power at the breaker before starting any repair
• Handle fragile glass/printed surfaces and ribbon cables with care to avoid damage
• Confirm exact fit to your model using the appliance's parts diagram before installation

This is a direct-replacement control panel push button that restores a worn or broken selector/press button so you can operate the appliance's controls reliably. Simple swap keeps your console looking and working like new. What it does:

• Replaces a worn, cracked, or missing control panel push button
• Provides a tactile surface for selecting functions or settings on the control console
• Helps fix buttons that stick, don't depress fully, or no longer register reliably
• Restores the original appearance of the control panel

• Power off and unplug the appliance (or switch off breaker) before starting any repair
• Remove the control panel or console per the service instructions for safe access
• Replace the button by removing any retaining clip or bezel and snapping the new button into place

A replacement tension spring that restores proper tension and movement for the appliance mechanism. Replaces a worn or broken spring to help components return to position and operate smoothly. What it does

• Provides tension to the linked mechanism so moving parts return to their resting position
• Helps doors, latches or internal linkages close and seat reliably
• Reduces excess play, rattling or misalignment caused by a damaged spring
• Commonly needed when a spring is stretched, broken, or no longer holds tension

• One replacement spring

• Disconnect power and remove food or move the appliance to access the repair area as needed
• Use gloves and eye protection; springs can release suddenly during removal or installation
• Follow the appliance service manual for proper routing and attachment points

This replacement lever restores the control or release function on compatible Frigidaire appliances, letting a worn or broken lever operate smoothly again. Use it when the original lever is cracked, loose, or no longer engages. What it does

• Replaces a worn or broken lever that controls a latch, selector, or mechanical action
• Restores secure engagement and reliable movement for normal appliance operation
• Stops slipping, sticking, or failed engagement caused by damaged levers
• Fits the original mounting points to maintain correct alignment and motion

• One replacement lever

• Turn off power to the appliance before starting any repair to avoid shock or injury
• Inspect surrounding linkage and fasteners; replace any damaged clips or screws for a secure fit
• Use basic hand tools; avoid forcing parts to prevent damage

This replacement control panel restores the front user interface and display for your range/oven, letting you select cooking modes, set timers and adjust temperatures. It replaces a cracked, unresponsive, or malfunctioning control surface. What it does:

• Houses the touchpad/buttons and display used to program cooking functions and timers
• Sends user inputs to the oven control board so bake, broil and other modes start correctly
• Common symptom fixer: replaces panels with stuck, non-responsive, or visually damaged buttons
• Resolves intermittent or blank display issues caused by a damaged panel or keypad

• Disconnect power at the breaker before starting any repair
• Handle fragile glass/printed surfaces and ribbon cables with care to avoid damage
• Confirm exact fit to your model using the appliance's parts diagram before installation

This replacement control panel restores the front user interface and display for your range/oven, letting you select cooking modes, set timers and adjust temperatures. It replaces a cracked, unresponsive, or malfunctioning control surface. What it does:

• Houses the touchpad/buttons and display used to program cooking functions and timers
• Sends user inputs to the oven control board so bake, broil and other modes start correctly
• Common symptom fixer: replaces panels with stuck, non-responsive, or visually damaged buttons
• Resolves intermittent or blank display issues caused by a damaged panel or keypad

• Disconnect power at the breaker before starting any repair
• Handle fragile glass/printed surfaces and ribbon cables with care to avoid damage
• Confirm exact fit to your model using the appliance's parts diagram before installation

This electronic control board is the appliance's main oven control that manages heating cycles, temperature settings, timers and user interface functions so your range or oven responds correctly to commands. What it does:

• Receives input from the front control panel and sends signals to bake/broil elements, igniters, and fans
• Regulates timed cooking cycles, temperature control, and electronic display functions
• Can resolve symptoms such as a non-responsive control panel, unresponsive timer/display, or incorrect heating cycles when diagnosed as the faulty part
• Works as the central logic/relay board that coordinates multiple oven systems

• One electronic control board

• Turn off power to the appliance at the house circuit breaker before servicing to avoid electrical shock
• Handle the board by its edges and avoid touching components or connector pins to prevent electrostatic or physical damage
• Verify connectors and grounding wires are secure and match original locations during reassembly

The Door Assembly is an OEM part for Frigidaire microwave ovens. Securing the front of the microwave cavity, the door assembly consists of an outer metal casing enclosing a perimeter gasket and interlocking latch mechanism. This assembly allows for the opening, closing, and sealing of the microwave.

Causes of a bad door assembly include cracked or misshapen door exteriors, ruptured perimeter gaskets no longer creating a proper seal, or failed latching systems unable to securely lock the door shut. 

Symptoms of a bad Microwave Door Assembly include:

• Leaks of electromagnetic radiation from door perimeter  
• Door failing to latch or release properly
• Gasket failing to form an airtight bond around waveguide
• Physical deformation preventing a flush door closure

This genuine OEM part is compatible with Electrolux, Gibson, and some Kenmore microwave models as well.

This replacement latch assembly secures the refrigerator or freezer door to ensure proper closure and reliable operation. It restores the door catch so the appliance can maintain an effective seal and help prevent cooling loss. What it does:

• Secures the door to keep it closed and aligned
• Replaces a broken, bent, or worn latch that prevents proper latching
• Helps reduce warm air entry caused by a door that won't stay shut
• Works as the mechanical catch that engages the door striker

• Disconnect power (unplug appliance) before servicing to avoid shock or injury.
• Remove the inner door panel or access trim as needed to reach the latch; keep screws and fasteners organized.
• Align the latch with the door striker and tighten screws securely without over-torquing.
• Test door operation several times after installation to ensure proper engagement and seal.