Parts for Frigidaire FPBM3077RFC: Control Panel,Door,Misc. Parts

The Control Assembly is an OEM part for Frigidaire microwaves. It is responsible for controlling and operating various functions of the microwave, including setting the cooking time, adjusting power levels, and activating specific features.

A bad control assembly can be caused by electrical issues, component failure, or physical damage. Signs of a faulty control assembly include unresponsive buttons or controls, display malfunctions, or the inability to start or complete a cooking cycle.

Symptoms of a bad control assembly can include:

• Unresponsive buttons or controls
• Flickering, dimming, or missing segments
• Inability to start a cycle

Replace your malfunctioning control assembly with this genuine OEM part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This electronic control board replaces the refrigerator's main logic board to restore control of cooling cycles and user interface functions. It provides the control signals that run the compressor, fans, defrost and dispenser/ice features. What it does:

• Manages compressor, evaporator fan and defrost heater timing to maintain proper cooling
• Interprets inputs from the user interface and sensors to run cycles and displays
• Can resolve symptoms like no cooling, no defrost, unresponsive controls or erratic operation
• Works as the central logic/relay hub that sends power and signals to subsystem components

• One electronic control board (PC board) as shown

• Disconnect power before starting; verify replacement part number matches the board on your appliance
• Handle by the edges and avoid static discharge; do not bend or touch components
• Reconnect all harnesses and secure mounting fasteners; double-check wire placement before restoring power

This replacement part is a door. This part is commonly found in various types of microwaves. The door seals the appliance shut so that food and other items can be heated safely.A new door might be needed if the current one is no longer able to shut. The appliance may no longer work at all if the door cannot shut. This should be a fairly simple repair and should only require common household tools such as a screwdriver or pliers if the previous door is stuck.This is a genuine OEM replacement part made by Frigidaire and is sold individually.

This panel assembly replaces a worn, cracked, or faded control-panel trim to restore the appliance's finished appearance and provide a proper mounting surface for the control buttons and display. Ideal when the existing panel is damaged or cosmetically degraded. What it does:

• Replaces the front control-panel trim that covers and supports the user controls and display.
• Restores a flush, finished look and protects underlying electronics from minor impacts and spills.
• Helps resolve issues caused by damaged or warped trim that interfere with button access or visibility.
• Intended as a direct-fit cosmetic and mounting replacement.

• One panel assembly.

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Typically installs with a few screws and clips after removing the control console; keep original fasteners unless replacements are provided.
• Handle carefully to avoid scratching the finish and to protect any attached lenses or trim pieces.

The Door Trim is an OEM part for Frigidaire microwaves. As an accent piece affixed to the outer door frame, it contributes to the overall appearance and aesthetic of the appliance.

Causes of a damaged door trim can include wear from extended opening and closing loosening adhesive bonds, impact damage detaching perimeter pieces, or discoloration/ cracks affecting its visual appearance over time.

Symptoms of a faulty door trim involve: 

• Gaps or separation from the door frame
• Loose, flaking, or discolored trim sections  
• Protruding edges present risk of cuts or snags

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

The Door Latch is an OEM part for Frigidaire microwaves. It is a component that secures the microwave door closed during cooking functions and prevents it from accidentally opening. The latch is designed with a sturdy spring-loaded mechanism to provide a secure seal around the door opening.

Causes of a bad latch can include wear and tear over time, damage from repeated use, or failure of the latch spring or locking mechanism.

Symptoms of a bad microwave door latch include:

• The door not closing or latching securely
• Difficulty or inability to lock the door closed
• The door popping or swinging open during a cooking cycle
• Reduced power or inability to operate cooking functions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This refrigerator door handle assembly replaces a worn, broken, or loose handle to restore a secure grip and clean appearance. It provides the mounting hardware and trim needed for normal opening and closing of the fridge door. What it does:

• Replaces a cracked or broken door handle to restore a safe, stable grip
• Stops loose or wobbly handles that can catch or interfere with door operation
• Restores the cabinet's finished look when the original handle is damaged or scratched
• Compatible with factory mounting points for straightforward replacement

• Remove power and empty door area for safe, unobstructed access before beginning
• Use appropriate screwdrivers; retain original screws if they are undamaged and match the new assembly
• Avoid overtightening fasteners to prevent cracking the handle or trim

This PC Board is an OEM part for Frigidaire microwaves. It is a critical electronic component that regulates and controls various functions of the microwave, such as the power settings, timer, and cooking modes.

The malfunctioning of a microwave's PC board can be attributed to electrical surges, normal wear and tear, exposure to moisture, or electrical faults within the microwave. These issues can lead to a decrease in the microwave's efficiency and functionality.

Symptoms of a failing PC board  include:

• Inconsistent cooking or heating performance.
• The microwave fails to start or abruptly stops during operation.
• The control panel is unresponsive or displaying error codes.
• Difficulty in adjusting the microwave settings.
• The microwave exhibits unusual behavior, such as starting without input.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

A tempered glass refrigerator shelf that provides a sturdy, easy-to-clean surface for food storage and organization. Designed to replace a damaged or missing shelf and restore usable storage space. What it does:

• Holds food and containers securely on a flat, stable surface
• Restores proper shelf spacing and storage flexibility after breakage
• Resists stains and wipes clean for simple maintenance
• Helps maintain even airflow and organization inside the compartment

• Remove all items from the compartment before installation
• Slide shelf into the support rails or brackets until fully seated and stable
• Handle tempered glass carefully; avoid impacts or dropping during installation
• If supplying shelves with metal trim or clips, verify they are aligned with the cabinet supports