Parts for Frigidaire LFMV1645TFA: 03 - Control Panel, Door, Misc Parts

This control panel is the front user interface console for the range, providing the buttons and display needed to select cooktop and oven functions so you can operate cycles and timers easily and reliably. What it does:

• Houses the touchpads/buttons and display that let you set oven temperature, timers, and cooking modes
• Transmits user commands to the range control board so selected functions run as intended
• Replaces a cracked, worn, or unresponsive console surface to restore normal control access
• Can resolve issues where buttons fail to register or the front controls look damaged

• One control panel (user interface console) as shown

• High-level replacement: power must be disconnected before access; panel typically secures to the console with screws and ribbon/plug connections
• Handle internal connectors gently to avoid damage to the display ribbon or control board terminals
• If electronic connectors or the underlying control board show damage, inspect and replace those parts as needed

This is the refrigerator control panel that provides the user interface for settings and status feedback, restoring clear button access and readable indicators so you can adjust temps and features easily. What it does:

• Houses the buttons/touch pads and display used to change settings and view status
• Replaces a cracked, faded, or non-responsive front panel
• Restores readable indicator lights and button feedback for normal operation
• Helps address symptoms like unresponsive controls, missing labels, or damaged faceplate

• Disconnect power to the appliance before beginning any service
• Remove surrounding trim and mounting fasteners to access the panel; handle with care to avoid cracking
• Reconnect wiring harnesses securely and test functions before reassembling

This electronic control board replaces the refrigerator's main circuit board to restore control of functions and display operation. It manages timed cycles and user inputs so the appliance responds correctly to settings. What it does

• Receives signals from the user interface and sends commands to components.
• Controls defrost and cooling cycles; failures can cause display errors or unresponsive controls.
• Common symptoms: unlit or flashing display, buttons that don't work, erratic cooling or defrost behavior.
• Replacing the board often resolves control-related faults when wiring and sensors are otherwise good.

• One electronic control board.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Handle the board by edges and avoid static discharge; ground yourself or use an ESD strap.
• Verify connectors and wiring harness seating before and after installation; do not force connectors.
• If problems persist after replacement, check related sensors, harnesses, and fuses — the board only controls signals it receives.

This genuine OEM part is a microwave door assembly. The door assembly is the main component of a microwave door. Over time, a microwave door assembly can become damaged through excessive wear and tear. If the door is no longer shutting properly or struggling to remain closed, it might be time to replace the door assembly. Luckily, replacing this part is a simple repair. To replace the door assembly, start by turning off all power to the microwave. Then locate the hinges that secure the door to the microwave. Once located, proceed to remove the screws from their mounting brackets. Once unfastened, lift the door off from the hinges. Next, take the new door assembly and place it directly on the hinges. Fasten the screws to secure the new door and test to see if it opens and shuts smoothly.This replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse microwaves.

This front control panel provides the user interface for your appliance, protecting switches and displaying settings while keeping controls organized and accessible. It restores a clean, functional console surface. What it does:

• Replaces damaged or worn control surface to return a tidy, usable interface
• Protects underlying switches and electronic controls from spills and debris
• Helps restore clearly visible button/label layout for easier operation
• Helps resolve issues with stuck or unreadable controls caused by panel damage

• One front control panel

• Disconnect power before attempting any repair to avoid shock or damage
• Remove screws or clips securing the old panel, then lift out and unplug any connectors
• Align and reconnect wiring harnesses, then secure the replacement panel with the original fasteners

The Door Latch is an OEM part for Frigidaire microwaves. It is a component that secures the microwave door closed during cooking functions and prevents it from accidentally opening. The latch is designed with a sturdy spring-loaded mechanism to provide a secure seal around the door opening.

Causes of a bad latch can include wear and tear over time, damage from repeated use, or failure of the latch spring or locking mechanism.

Symptoms of a bad microwave door latch include:

• The door not closing or latching securely
• Difficulty or inability to lock the door closed
• The door popping or swinging open during a cooking cycle
• Reduced power or inability to operate cooking functions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

The Handle is an OEM part for Frigidaire microwaves. It attaches to the microwave door and allows users to easily open and close access to the cooking cavity. This handle plays an important role in usability by providing a convenient grip point.

Causes of a bad handle can be normal wear and tear over time from repeated use. Handles can also become damaged or loose due to accidental mishandling or impact.

Symptoms of a bad handle include:

• Loose or detached handle
• Difficulty accessing the cooking cavity 
• Potential safety hazards

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.