Parts for Frigidaire FGET2766UDA: Control Panel Parts

The Control Panel is an OEM part for Frigidaire wall ovens. It is responsible for controlling and regulating the various functions of your oven, such as temperature settings, cooking modes, and timer functions. It allows you to easily navigate through different cooking options and make adjustments.

A bad control panel can be caused by electrical issues, component failure, or physical damage. Signs of a faulty control panel include unresponsive buttons, erratic display, or failure to start or complete cooking cycles.

Symptoms of a bad control panel include:

• Unresponsive buttons or difficulty in selecting cooking options
• Erratic or flickering display
• Failure to start or complete cooking cycles

Replace your defective or damaged control panel with this genuine OEM Frigidaire part to restore your wall oven. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This electronic main control board regulates the appliance's functions and user interface, restoring proper control when the unit won't respond or behaves erratically. Replace a failed board to return the appliance to normal operation. What it does:

• Receives and processes inputs from the touchpad/controls and sends signals to components.
• Common symptom: display is blank or unresponsive to commands.
• Common symptom: appliance cycles improperly, won't start, or functions intermittently.
• Common symptom: error codes or persistent faults that point to a control failure.

• One main electronic control board.

• Always disconnect power (unplug or shut off breaker) before starting work.
• Handle the board by edges and avoid static discharge—use anti-static precautions if available.
• Keep fasteners and wiring in original locations; match connector positions exactly during reassembly.

This electronic control board governs your range's oven functions and display. Replace a failed board to restore temperature regulation, bake/broil operation, and a working clock/timer when the display is dead or buttons stop responding.

• Regulates oven temperature by switching power to the heating elements
• Drives the digital clock/timer and processes keypad inputs
• Coordinates oven modes such as bake and broil
• Common failure signs: no heat, dead or dim display, unresponsive buttons, or recurring error codes

• Disconnect power at the breaker before servicing and verify no voltage is present
• Access through the control panel; move wires and any mounting parts to the new board one at a time
• Handle the board by the edges and use anti-static precautions
• Restore power and test oven functions and the display after installation

Specs: 8 x 0.750

This wire harness routes power and signals between the appliance's controls and components to restore reliable electrical connections and proper function. Use the correct harness to replace damaged, corroded, or broken wiring assemblies. What it does:

• Connects control boards, switches, motors, and sensors so parts receive power and communicate
• Replaces frayed, pinched, or open wires that can cause intermittent operation
• Helps stop failures like no power to components, unresponsive controls, or parts that won't run
• Maintains factory routing and connector fit for safe, reliable operation

• Disconnect power (unplug or shut off breaker) before starting any repair
• Handle connectors gently; match keyed plugs and secure all retaining clips
• Route harness to avoid sharp edges, heat sources, and moving parts

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.