Parts for Frigidaire FPEC3677RF0: 02 - Control Panel Parts

This genuine replacement switch kit restores reliable electrical switching for your appliance's control or component circuit. Replacing a worn or failed switch helps bring back consistent on/off or mode selection response and prevents intermittent operation.

• Opens and closes the electrical circuit to control a function or component
• Helps resolve no response when actuating the switch or intermittent operation
• Useful when the switch sticks, feels loose, or shows signs of arcing or heat damage
• Can address issues like inability to turn a function on/off or erratic behavior

• Disconnect power and allow components to cool before servicing
• Photograph or label wiring to ensure correct reconnection
• Transfer any brackets or terminals from the old switch if applicable
• Secure connections firmly; avoid overtightening and verify proper operation after reassembly

The Surface Element Switch is an OEM part for Frigidaire electric cooktops and ranges. It is an electronic component that controls the power supply to individual cooking elements on the surface.

Causes can be normal wear and tear over time, exposure to moisture, food spills or other contaminants on the cooktop. Physical damage from impacts could also cause switch failure.

Symptoms of a bad surface element switch include:

• Elements failing to heat up or staying hot even when controls are set to off
• Inconsistent or intermittent power to surface elements
• Loose, cracked, or non-responsive switches

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This switch bushing fits the control shaft to stabilize and guide rotary switches, helping restore proper knob alignment and smooth operation. It prevents wobble and uneven contact that can cause intermittent control behavior. What it does:

• Centers and supports the control shaft to keep the switch and knob aligned
• Reduces wobble and lateral play that can make knobs feel loose or inconsistent
• Helps maintain reliable electrical contact by keeping the switch properly seated
• Commonly replaced when knobs are loose, the switch wobbles, or control engagement is uneven

• One switch bushing

• Disconnect power to the appliance before starting any repair
• Requires removing the control panel or knob to access the switch shaft; small hand tools typically needed
• Inspect the switch and knob for wear while replacing the bushing; replace worn components as needed

This Main Top Assembly replaces the cooktop surface on compatible Frigidaire ranges, restoring a flat, stable surface for burners and cookware. It helps eliminate gaps, sagging, or cosmetic damage for safer, cleaner cooking. What it does:

• Provides the finished cooktop surface that supports burners and cookware.
• Restores proper alignment and spacing for burner elements and grates.
• Replaces dented, warped, or corroded tops that trap spills or affect burner fit.
• Improves appearance by covering scratches, rust, or worn finishes.

• Disconnect electrical power to the range before starting; shut off gas supply on gas ranges.
• Handle edges carefully—use gloves to avoid cuts and protect the finish from scratches.
• Basic hand tools are usually required; transfer knobs, burner heads, grates, and mounting hardware only if compatible and undamaged.

A replacement control knob that lets you set and adjust cooktop or oven temperature and functions with a secure fit and simple push-on installation. Restores worn or missing knobs so you can safely operate burner and oven controls. What it does:

• Replaces a worn, cracked, or missing control knob used to select heat settings and functions
• Provides a tactile, easy-grip surface for precise control of cooktop burners or oven settings
• Helps stop slipping or intermittent control caused by damaged knobs
• Fits on standard D-shaped or splined valve/stem interfaces used on many ranges and ovens

• One control knob designed for direct replacement

• Push-on installation; align the knob opening with the control stem and press until seated
• Disconnect power to the appliance or turn off gas/burner controls when working near live elements
• If the knob does not fully engage, do not force it—verify stem compatibility

This round control knob replaces a worn or broken selector on ranges and ovens, restoring a secure grip and reliable temperature or function selection. Easy swap keeps your appliance operating like new without needing full control-panel repairs. What it does:

• Provides a tactile interface for selecting temperature, burner heat, or oven functions
• Replaces cracked, stripped, loose, or missing knobs that slip or fail to engage controls
• Restores proper fit and rotation so settings register accurately
• Works with shaft-style valve/stem controls that accept a friction or D-shaped hub

• One control knob (1 each)

• Pull the old knob straight off the control stem; press the replacement firmly onto the stem until fully seated
• Verify alignment with any indicator marker or flat on the shaft before use
• Disconnect power (or turn off gas) and allow surfaces to cool before servicing

A direct-replacement control knob that restores user control of your appliance's settings. Designed to give a secure grip for adjusting temperature or function and to replace cracked, stripped, or missing knobs. What it does:

• Provides a tactile interface for turning range/oven or appliance controls
• Replaces knobs that are cracked, worn, or no longer engage the control shaft
• Helps restore accurate selection of heat levels or functions
• Prevents slipping or improper engagement from damaged knobs

• High-level: remove the old knob by pulling it straight off the control shaft and push the new knob onto the shaft until fully seated
• Use gentle, even pressure to avoid damaging the control shaft or new knob
• If the knob is secured with a set screw, tighten only until snug—do not overtighten
• Always disconnect power to the appliance (or turn gas/electric controls to OFF) before servicing controls

Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.

To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.