Parts for Whirlpool WFE525S0HB0: Control Panel Parts

Color: White  Note: Left side endcap

Color: Black   Note: Left side endcap

Color: Black   Note: Right side endcap

This end cap panel covers and finishes the exposed edge of a control or cabinet panel for a clean, factory appearance while protecting edges from chips and wear. It restores the look and helps prevent debris buildup in the gap. What it does:

• Covers and protects the exposed edge of a control/cabinet panel to restore a finished appearance
• Hides fasteners and raw panel edges for improved cosmetics
• Prevents dirt and debris from collecting in the panel gap
• Common replacement for cracked, chipped, loose, or missing end caps

• One end cap panel

• Disconnect power to the appliance before starting any repair
• Remove adjacent trim or screws as needed; align end cap and secure with original fasteners
• Handle carefully to avoid scratching the finish; do not overtighten screws
• Replace any damaged clips or mounting hardware to ensure a secure fit

Color: White  Note: Right side endcap

Color: White

The Control Board is an OEM part for Whirlpool ranges. It is responsible for operating and controlling all cooking elements like the oven, surface burners, and controls the display touch screen or tactile buttons.

Causes of a bad control board are generally associated with electrical problems such as wiring faults, shorts, or component failure due to heat exposure over time.

Symptoms of a bad control board include:

• Surface or oven elements not heating up or working intermittently
• Stove display or control panel malfunctioning
• Inability to accurately control temperature
• Error codes appearing on the control panel

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This user interface control is the touch/display module that reads your button presses and shows status information. Replacing a failing UI restores responsive controls and a readable display so you can operate your appliance reliably.

• Receives button/touch inputs and sends commands to the main control
• Displays time, settings, and status or fault information
• Failure can disrupt communication with the main board
• Common symptoms: unresponsive or intermittent buttons, blank/dim display, error codes, inability to start or change settings

• Disconnect power before servicing; this is an electrical component
• Protect against static discharge; handle the board by its edges
• Note cable routing and connectors; avoid creasing ribbon cables
• If your model uses a separate overlay, transfer it carefully; run any required configuration/diagnostics after installation

This control panel is the appliance's user interface that houses the buttons and display, restoring normal control and access to settings for the unit. It replaces a damaged, worn, or unresponsive console assembly. What it does:

• Provides the front-facing buttons and display used to select cycles, options, and settings
• Restores responsive button operation and visible status/readout when the original panel is cracked, faded, or unresponsive
• Can resolve intermittent or erratic control behavior caused by a damaged console assembly
• Re-establishes normal user control when controls fail to register presses or the display is unreadable

• One control panel assembly

• Disconnect power to the appliance before beginning any work to avoid shock or damage
• Remove any trim or bezels carefully to access the console; keep fasteners and small parts organized
• Handle the panel and attached wiring gently; align and fully seat connectors during reassembly
• Test function after reconnecting power and before replacing trim or finishing the repair

The Infinite Switch is an OEM part for Whirlpool ranges and cooktops. This part controls the temperature of the small burner on electric ranges and cooktops by regulating the power supplied to the burner. The infinite switch allows for precise temperature settings, providing the flexibility to cook a wide variety of dishes by adjusting the heat level as needed. 

Over time, infinite switches can wear out or malfunction, leading to issues with controlling the burner's temperature.  

Symptoms of a bad Infinite Switch include:

• The burner does not heat or heats intermittently
• The burner heats to full power regardless of the setting
• Inability to adjust the burner's temperature accurately
• Physical damage to the switch, such as cracking or melting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dual Element Control Switch is an OEM part for Whirlpool ranges and cooktops. This control switch is designed for models with dual heating elements, allowing you to adjust the size of the heat output on the LF element depending on whether you are using the inner or outer element. 

Causes of a bad Dual Element Control Switch can include electrical issues such as short circuits or worn contacts, physical damage to the knob or switch mechanism, or problems with the internal components that regulate power.

Symptoms of a failing Dual Element Control Switch include:

• Inability to change between the inner and outer elements
• Irregular heating or lack of response when adjusting the temperature
• The switch feeling loose or not engaging properly
• Burner not heating even though the switch is turned on

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

This mounting bracket secures appliance components and panels to keep assemblies aligned and stable, helping prevent rattles and loose parts. It's a simple replacement that restores proper fit and support where the original bracket has failed. What it does:

• Provides rigid support for internal components or exterior panels to maintain alignment
• Stops vibration and rattling caused by a broken or bent bracket
• Restores secure attachment points for screws and fasteners
• Helps prevent additional wear from loose parts moving during operation

• Always unplug the appliance or disconnect power before starting any repair
• Remove necessary access panels to reach the damaged bracket; keep track of fasteners
• Reuse original screws if undamaged; replace stripped or corroded fasteners
• If alignment issues persist after installation, recheck fit and mounting points for damage

This control knob lets you select heat settings and operate a range or stove control safely and easily. It replaces a cracked, worn or missing knob so you can turn burners or oven settings with a secure grip. What it does:

• Fits onto the range/stove control shaft to set burner or oven temperatures
• Restores a solid grip for smooth turning and precise selection of settings
• Common fix for a loose, stripped, cracked or missing control knob
• Helps eliminate slipping or difficulty changing settings

• Turn off power to the appliance before installing to avoid injury
• Align the knob splines with the control shaft and press straight on until fully seated
• Do not force—if it does not seat easily, verify spline orientation and shaft type
• If internal control or shaft is damaged, replace the underlying control assembly

This replacement control knob restores reliable operation for range and oven controls, letting you select heat and burner settings with a secure grip. Durable and easy to install, it replaces cracked, worn, or stripped knobs. What it does:

• Fits onto the control shaft to allow selection of temperature and burner settings.
• Restores positive engagement when an old knob spins, slips, or won't turn.
• Stops leaks of user input caused by stripped splines or damaged faces.
• Matches the OEM shape and function for a direct-fit replacement when the correct part number is used.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Most installs are tool-free: pull the old knob straight off and push the new knob onto the control shaft, aligning flats/splines.
• If the knob does not seat fully, verify orientation and spline match; do not force the part.
• After installation, restore power and test at a low setting to confirm proper operation.

The Knob is an OEM component specifically designed for Whirlpool ranges. This knob attaches directly to the electronic control panel, allowing for easy adjustment of temperature settings during the cooking process. 

Causes of a bad knob can include cracks or breaks in the plastic material, worn lettering making the knob difficult to read, or malfunctions in the electronically-controlled interface. 

Symptoms of a bad knob include: 

• Difficulty turning the knob 
• Inaccurate temperature display 
• Unresponsive or inconsistent adjustments
• Loose or detached fit on the control panel

This OEM Whirlpool replacement part is designed to directly replace the original equipment knob, restoring a seamless fit and functionality. It is also compatible with the models of Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.

• Provides machine-thread fastening for panels, brackets, and internal parts
• Helps eliminate rattling, vibration, and loose fits
• Restores proper attachment when the original screw is stripped, missing, or corroded
• Used wherever an 8-32 screw is specified in the service manual or parts list

• Disconnect power to the appliance; turn off gas/water if applicable
• Match the screw to the original location to confirm size and thread
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten to prevent stripping or cracking

This upper electrical cover protects and conceals the appliance's control box and wiring, helping keep electrical components safe from dust and accidental contact. It restores a finished appearance and supports secure mounting of the console area. What it does:

• Covers and shields the control box and wiring from dust, debris and accidental contact.
• Helps keep electrical connections secure by providing a proper mounting surface for the console.
• Restores the appliance's exterior appearance when the original cover is cracked, warped or missing.
• Reducing exposed components can help avoid nuisance issues like loose connectors or intermittent controls.

• Disconnect power (unplug or shut off the breaker) before starting any work.
• Handle panels carefully — metal edges can be sharp; wear gloves if needed.
• Keep original screws/fasteners or replace with equivalent OEM screws; verify alignment before tightening.

This control bracket secures the appliance control or console assembly, keeping the control board and user interface stable for reliable operation. It helps prevent loose or misaligned controls that can affect button response or display visibility. What it does:

• Provides a rigid mounting surface for the control board or console assembly
• Keeps control components aligned and stable during normal use
• Helps reduce vibration-related connector or wire stress
• Can restore proper fit and button alignment when the panel is loose

• One control bracket

• Disconnect power to the appliance before starting any repair
• Handle the control board and wiring harness carefully to avoid damage
• Basic hand tools (screwdriver, nut driver) are typically required for removal/installation
• Reuse existing screws or verify hardware compatibility