Parts for Whirlpool WOC75EC7HS01: Control Panel Parts

This replacement electronic control board manages the appliance's functions, user inputs and cycle timing so your unit runs the selected programs correctly. Use it to restore control responsiveness and normal cycle operation when the original board fails. What it does:

• Receives and processes user commands from the control panel and starts the appropriate cycles
• Controls timing, relays and communications between sensors and motors
• Commonly used when an appliance won't start, shows no display, displays error codes, or cycles improperly
• Works with associated relays and touch controls to regulate operation

• Always disconnect power before servicing; this part handles live voltages
• Handle the board carefully to avoid static discharge and physical damage
• May require removal of the console or control housing; keep track of screws and connectors

The Blower is an OEM part for Whirlpool ranges. It is responsible for cooling down the internal parts of the range during operation, preventing overheating. This cooling fan blower motor circulates air, dissipating heat and maintaining a safe operating temperature for the range. It helps to extend the lifespan of the range and prevents potential damage caused by excessive heat buildup.

A bad cooling fan blower motor can occur due to wear and tear or electrical malfunctions. If you notice symptoms such as loud or unusual noises coming from the range, failure of the cooling fan to operate, or overheating issues, it may be time to replace the blower motor.

Symptoms of a bad cooling fan blower motor include:

• Loud or unusual noises coming from the range
• Failure of the cooling fan to operate
• Overheating issues with the range

Restore your range by replacing the faulty or worn-out cooling fan blower motor with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Console is an OEM part for Whirlpool wall oven and microwave units. It is designed as a replacement for the control board and overlay, serving as the central hub for controlling and operating the oven or microwave functions.

A bad console can occur due to electrical issues, component failure, or physical damage. If you notice problems such as unresponsive controls, error messages, or erratic behavior of the oven or microwave, it may indicate a problem with the console.

Symptoms of a bad console include:

• Unresponsive controls or display panel
• Error messages or error codes 
• Malfunctioning of oven or microwave functions

Replace your faulty console with this genuine OEM Whirlpool part to restore your wall oven or microwave. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This control panel is the user interface assembly that houses the oven/range touchpads, buttons and display, letting you select cooking modes and view status. It restores responsive controls and readable display feedback. What it does:

• Provides the main user interface for setting bake, broil, timer and other functions
• Transmits button/touch commands to the range's control electronics
• Restores display of time, temperature and error/-status indicators when faulty
• Helps address symptoms like unresponsive buttons, missing display information, or intermittent control operation

• Disconnect power at the breaker before attempting service to avoid shock
• Some installations require removing the oven door and back panel to access mounting screws and electrical connectors
• Handle the display and ribbon/connector carefully to avoid damage

This control panel is the user interface assembly that houses the oven's touchpads and display so you can select cooking modes and view settings. It replaces a damaged or unresponsive console to restore normal control and display functions. What it does:

• Provides the front-facing buttons/touchpads and display used to set oven temperature, timers, and cooking modes.
• Sends user commands to the oven control board so functions start when selected.
• Commonly replaced for symptoms such as unresponsive buttons, missing/blank display segments, or incorrect readouts.
• Restores reliable input and clear status feedback when the original panel is cracked, worn, or faulty.

• One control panel/user interface assembly

• Disconnect power to the appliance before attempting any repair to avoid shock or damage.
• Basic hand tools are typically required; some models may require removal of the oven door or back panel.
• Handle the display and ribbon connectors carefully to avoid damage; confirm connector seating during reassembly.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This mounting bracket is a replacement support bracket that secures appliance components and keeps assemblies aligned for reliable operation. It restores proper fit and helps prevent rattling or movement from loose fittings. What it does:

• Secures panels or assemblies to the appliance frame to maintain proper alignment
• Reduces vibration and rattling caused by loose or damaged supports
• Restores mounting points that prevent sagging or separation of connected parts
• Helps ensure stable operation after repairs involving removed or replaced hardware

• Follow the appliance service manual for exact location and fastener torque
• Disconnect power (and gas if applicable) before beginning any repair
• Use appropriate tools and replace any damaged screws or clips with OEM-equivalent fasteners