Parts for Lg DLHC1455W/00: Control Panel & Top Plate Assy Parts

This refrigerator door assembly replaces a damaged or worn exterior door to restore proper sealing, appearance, and access to the fridge compartment. It fits select LG refrigerators and restores normal door operation and insulation. What it does:

• Replaces a cracked, dented, or bent refrigerator door to improve sealing and energy efficiency.
• Restores proper door alignment and latch engagement to prevent warm air leaks and cooling loss.
• Returns the exterior finish and handle mounting surface to like-new condition.
• Helps resolve common symptoms like visible door damage, poor closure, or uneven gaps.

• Disconnect power and empty/remove food and shelves from the door before starting.
• Installation typically requires removing hinge covers and transferring gaskets, handles, and trim as needed.
• Use proper support for the door during removal/installation to avoid injury or damage.

Fix a dryer that won't tumble or makes squealing noises. This drum belt connects the motor to the drum, restoring rotation. Moderate DIY repair.

Dryer won't start or stops mid-cycle? This door strike hook secures the door latch, engaging the switch so cycles can begin and run properly.

Replace your dryer door seal gasket to prevent heat loss and improve drying efficiency. Installs around the door opening for an airtight seal. Verify fit.

This dispenser assembly replaces the refrigerator door dispenser housing to restore proper dispensing of water and ice and to secure the dispenser controls and chute. It restores correct alignment and helps stop leaks or jams at the door. What it does

• Houses the dispenser controls, chute and actuator for water and ice dispensing
• Directs water and ice from the door to the cup or bin
• Fixes symptoms such as water leaking at the dispenser, jammed or stuck dispenser lever, or loose/ misaligned dispenser components
• Provides a stable mounting point for switches, nozzles and trim around the dispenser opening

• Disconnect power and shut off the water supply before starting
• Handle components carefully to avoid cracking the plastic trim or damaging wiring
• Test dispenser function and check for leaks after reassembly

This replacement drain hose routes waste water from the washer tub to the drain pump or house drain, restoring proper water discharge and helping prevent leaks or standing water after a cycle. What it does:

• Carries used water from the tub to the drain pump or household drain
• Helps prevent leaks when properly secured with clamps
• Commonly replaced when the machine has slow draining, pooling water, or visible hose damage
• Works with original hose clamps and fittings when the correct connections are used

• Disconnect power and turn off water supply before starting any repair
• Remove access panels as needed to reach hose connections; preserve and reuse original clamps if undamaged
• Ensure hose routing and height match original installation to prevent siphoning or drainage issues
• Inspect connecting fittings and replace clamps if corroded; test for leaks after reassembly

Dryer door hinge bracket secures the door to the cabinet frame. Replace if bracket is cracked, broken, or damaged, causing door misalignment or instability.

Dryer door hinge bracket that secures the door hinge to the cabinet. Replace if cracked, broken, or the door alignment is compromised due to damage.

Dryer not tumbling clothes properly? A worn drum lifter causes poor drying and tangled loads. This repair takes 30-45 minutes with basic tools.

Replacement front cover panel for your dryer. Installs on the exterior cabinet to restore appearance when original is cracked, dented, or damaged.

This is a drum bearing kit that supports the rear of the dryer drum, allowing it to rotate smoothly during operation. The kit includes the bearing components needed to restore proper drum movement. Replace this kit if the dryer makes squealing, grinding, or rumbling noises during tumbling, or if the drum wobbles or does not spin freely.

Captures lint and debris from dryer air to maintain airflow and prevent buildup. Replace if torn, warped, or clogged. Confirm fit with your model.

Flat metal washer that spaces and secures internal fasteners in your dryer. Replace when worn or during repairs to maintain proper alignment. Confirm fit with your model number.

This outer cabinet provides the main exterior enclosure for the appliance, protecting internal components and giving the unit its finished appearance. Restores original fit and function when the outer housing is dented, cracked, or damaged. What it does:

• Replaces the appliance's outer enclosure to protect internal parts from dust, moisture, and impact.
• Restores proper alignment of doors, panels, and control openings affected by a damaged cabinet.
• Helps eliminate rattles, sharp edges, and cosmetic damage that can interfere with safe operation.
• Matches OEM mounting points so existing brackets, seals, and trim attach correctly.

• One outer cabinet

• Power off and unplug the appliance before starting; remove any attached trim, doors, or panels per service manual.
• Retain and reuse original screws, brackets, and insulation unless damaged; verify gasket/seal condition during reassembly.
• Minor alignment adjustments may be needed to ensure doors and controls sit flush.

This is a safety switch assembly that detects whether the dryer door is open or closed. It signals the control board to stop the drum and heating element when the door is opened during a cycle. Replace this switch if the dryer will not start, stops mid-cycle unexpectedly, or continues running with the door open.

This deodorizer is a replaceable odor-absorbing assembly that helps reduce lingering smells inside your appliance for fresher results. Designed to fit into the factory deodorizer slot and restore the appliance's odor-control function. What it does:

• Absorbs and reduces common food and musty odors that build up inside the appliance
• Helps maintain a fresher interior between cleanings
• Restores the appliance's original deodorizing feature when the installed unit is degraded
• Improves perceived air quality during and after cycles that produce odors

• One deodorizer assembly

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access and replace the deodorizer per the manufacturer's service instructions or parts diagram
• Handle the part gently and install in the correct orientation; verify secure fit before restoring power

This adjustable leg assembly raises and levels the appliance to keep it stable and reduce rocking. It provides a simple way to set appliance height for proper door alignment and smooth operation. What it does:

• Supports the appliance and transfers weight to the floor
• Allows height adjustment to level uneven floors
• Helps prevent excessive vibration, rocking, and noise
• Promotes proper door/drawer alignment and seal

• One leg assembly

• Disconnect power and empty the appliance before adjusting or replacing legs
• Raise or support the appliance safely before removing or installing the leg
• Adjust by turning the leg; tighten securely but avoid over-torquing

Replace your dryer's cooling motor assembly if your dryer overheats or shuts down unexpectedly. Direct fit for select LG models. Moderate DIY repair.

Dryer packing seal prevents moisture and lint from entering the drum shaft area. Replace if you notice leaks or unusual noise during operation. Verify fit with your dryer's model number before ordering.

Replace a broken tension spring causing loose or malfunctioning dryer components. Restores proper lever and assembly operation. Simple repair part.

Fix a dryer door that won't latch or stay closed during cycles with this door latch assembly. Restores secure door engagement and prevents mid-cycle openings.

Secures dryer panels, brackets, and trim pieces. Replace this fastener if missing, stripped, or damaged to restore proper assembly and safe operation.

Dryer making loud noises or vibrating excessively? A worn motor support bracket causes motor misalignment. This mount secures the motor housing properly.

The Screw is an OEM part for LG dryers. This screw secures the front panel to the outer housing, ensuring a properly assembled unit.

Causes of a bad screw can include stripping of threads from over-tightening, loss of the screw from repeated access to internal components, or damage such as cracking from dropping or other impact.

Symptoms of a bad front panel screw include:

• Loose, detached, or missing front panel assembly
• Accessibility issues opening or closing the dryer door
• Reduced stability of the overall dryer cabinet structure

This OEM LG part is also compatible with some Kenmore models.

This parts assembly is a factory-style replacement that restores the appliance's original component arrangement for reliable operation. Fits into the existing mounting points to replace a worn or damaged assembly quickly and safely. What it does:

• Replaces a damaged or nonfunctional assembly to restore the related appliance subsystem.
• Helps stop symptoms like intermittent operation, failure to start, or error codes tied to a failed assembly.
• Restores secure mechanical and electrical connections when the original assembly is broken or corroded.
• Maintains compatibility with the appliance's existing wiring and mounting locations.

• Disconnect power (and water supply if applicable) before beginning any repair.
• Handle electrical connectors and wiring carefully to avoid damage; match connectors exactly when reassembling.
• Use basic hand tools; follow appliance service manual steps for access and removal.

This damper assembly controls fresh air flow into the refrigerator compartment to help regulate internal temperatures. Replaces the factory air inlet damper to restore proper airflow between compartments. What it does:

• Opens and closes the fresh air inlet to control air exchange between compartments
• Helps maintain consistent refrigerator temperatures by regulating incoming air
• Common symptoms: uneven cooling, warm refrigerator compartment, or inconsistent temperatures

• One fresh air damper assembly

• Disconnect power before servicing to avoid electrical shock
• Handle the damper gently to avoid bending the flap or damaging the actuator
• Typically installs with a few screws and simple connectors; verify orientation before tightening

Dryer drum glide slider that supports the front of the drum during rotation. Replace if cracked, worn, or causing noise from drum misalignment.

If your dryer drum won't turn or makes squealing noises, this poly-V drive belt connects the motor to the drum. Moderate DIY repair restores tumbling.

The Pump Motor Assembly is an OEM component specifically designed for LG dishwashers. It houses both the wash and drain pump motors integrated within a singular assembly. 

These motors work together to efficiently circulate water through spray arms during wash cycles for optimized cleaning performance. They also help drain dirty water at the end of each cycle, ensuring dishes are thoroughly rinsed.  

Symptoms of a bad pump motor assembly include:

• Inadequate or incomplete wash and rinse performances
• Water failing to drain fully after cycles
• Leaks occurring due to ineffective pumps   
• Abnormal sounds from the motor during the operation

Causes can include normal wear over time, failures in motor electronic components, or damage from foreign debris. 

Replacing the pump motor assembly with this genuine OEM LG part restores optimized wash and rinse functions. It is also compatible with Sears/Kenmore dishwashers.

This packing seal provides a replacement sealing surface to help maintain an airtight, watertight closure and reduce leaks or drafts around the appliance opening. It restores the original sealing function for reliable performance. What it does

• Replaces worn or damaged packing to re-establish a secure seal
• Helps prevent water leaks and air infiltration at the door or panel seam
• Reduces moisture buildup and helps maintain proper internal temperatures
• Commonly used when a visible tear, deformation, or hardening is present

• One packing seal

• Inspect mating surfaces and clean thoroughly before installing the new packing
• Align the packing evenly and seat it fully into the channel or groove
• Use gentle, even pressure to avoid stretching or tearing the seal

Safety cover assembly shields internal dryer components from accidental contact. Replace if cracked, broken, or missing to restore protective barrier.

This drain hose cap seals the end of a dishwasher or washer drain hose to prevent leaks and help keep odors and debris from entering the drain line. It restores a snug, secure hose termination for reliable draining. What it does

• Seals the open end of a drain hose to reduce water leaks at the hose termination.
• Helps prevent sewer odors or debris from traveling back through the hose.
• Keeps hose connection clean and reduces risk of clogging at the open end.
• Useful when replacing a damaged or missing hose end cap to maintain proper drainage.

• Disconnect power and turn off water supply before servicing the appliance.
• Remove the old cap and inspect the hose end for damage or buildup; clean as needed.
• Push the cap onto the hose end until fully seated; verify a snug fit and no visible gaps.
• Test by running a short drain cycle and checking for leaks; replace if cap doesn't seal.

This blower cover houses and protects the appliance's blower assembly to maintain proper airflow and keep moving parts shielded. It restores safe airflow pathways and helps prevent debris from contacting the blower wheel. What it does:

• Protects the blower wheel and motor from lint, debris, and accidental contact
• Directs airflow from the blower to the appliance ducting for efficient ventilation
• Helps reduce rattling or rubbing caused by a damaged or missing cover
• Supports correct blower alignment to avoid uneven wear or noise

• Disconnect power before accessing internal components to avoid electrical shock
• Basic hand tools may be needed; handle plastic parts gently to avoid cracking
• Inspect blower wheel and mounting before reassembly and replace any damaged fasteners

Secures and connects accessory components in your dryer. Replace if the original assembly is cracked, broken, missing, or no longer holds parts securely.

Small fastening nut that secures panels, brackets, and hardware inside your dryer. Replace worn, missing, or stripped nuts to eliminate rattles.

Fix dryer overheating or not heating issues with this thermistor assembly. Monitors temperature to regulate heat cycles. Direct replacement part.

This damper regulates airflow between refrigerator compartments to help maintain proper cooling balance. Replaces a failed or stuck damper to restore controlled cold-air movement and improve temperature consistency. What it does:

• Opens and closes to direct cold air between freezer and fresh-food sections
• Helps balance compartment temperatures for better food preservation
• A faulty damper can cause warm fridge compartments, uneven cooling, or excessive freezer run time
• Works with the refrigerator's control system to respond to temperature settings

• Disconnect power to the appliance before beginning work
• Access typically requires removing interior panels or shelving—keep fasteners organized
• Handle the linkage and actuator carefully to avoid bending or damage
• Test operation after installation and restore all panels and shelves