Parts for Ge PSA1201RSS01: 02 - Control Parts

This electronic control board replaces a failed oven/range controller to restore cook and display functions. It manages baking, broiling, timed cycles and the front control display so you can set and monitor oven operations reliably. What it does:

• Receives user inputs and sets oven functions (bake, broil, timers, etc.)
• Controls heating elements and temperature regulation via relay/triac outputs
• Drives the front display and user interface; fixes unresponsive buttons or blank/error displays
• Stops faulty cycling or incorrect temperature behavior when the board is the cause

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify harness connections and mounting before reapplying power; confirm correct wiring to avoid damage

The Encoder Board is an OEM replacement part for GE microwaves, engineered to provide control over the microwave's functions. This component translates user input into digital signals for the microwave's main control board. It allows users to adjust power levels, cooking times, and settings accurately. 

The causes for issues with the Encoder Board can be attributed to electrical faults, such as short circuits or component failures, often resulting from power surges or normal wear and tear. 

Symptoms of a malfunctioning Encoder Board include:

• Difficulty in adjusting settings, which may manifest as unresponsive or erratic control panel behavior.
• The microwave starting or stopping unexpectedly, indicating a miscommunication between the user interface and the microwave's control system.
• Inconsistent cooking results, stemming from the inability to accurately set cooking parameters.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Relay board is an OEM component specifically designed for GE microwaves. This board features electronic relays that control important functions such as power levels, timing, and safety features. 

Symptoms of a bad relay board include:

• Microwave not heating or heating unevenly 
• Buttons or controls not working properly
• Timer not counting down accurately
• Safety features such as door interlock failing
• Buzzing, clicking, or popping noises coming from inside

Causes of a bad relay board include component failure over time due to heat cycling, electrical surges or spikes, or physical damage from accidental drops or impacts. 

This OEM GE part is also compatible with Hotpoint, RCA and some Kenmore models. 

This control knob restores safe, easy operation of a stove or range control. It replaces a cracked, melted, or missing knob so you can adjust burners or oven settings with a secure grip and clear feel. What it does:

• Fits onto the appliance control shaft to select burner or oven settings
• Replaces damaged, loose, stripped, melted, or missing knobs
• Provides a firm, tactile grip for precise control
• Helps prevent accidental changes by seating securely on the shaft

• Disconnect power (and gas, if applicable) before servicing the appliance
• Remove the old knob by pulling it straight off the control shaft
• Align the knob with the control shaft splines and push firmly until fully seated
• If the knob does not install easily, verify shaft alignment and do not force.

This replacement control knob lets you select cooktop or oven heat settings with a secure, easy-to-turn grip. Restores a damaged, worn or missing knob so temperature and function selections operate normally. What it does:

• Fits onto the appliance control shaft to set burner or oven temperature and modes
• Replaces cracked, stripped or missing knobs that are hard to turn or won't stay set
• Provides a clear tactile stop and position for accurate control selection
• Helps eliminate slipping or loose rotation caused by worn knobs

• One replacement control knob

• Push-on installation: align splines with the control shaft and press firmly until seated
• Turn power off at the appliance or breaker before accessing internal components
• Do not force onto the shaft; if it does not fit, verify shaft type and knob orientation
• If the original knob is damaged at the shaft or insert, the switch may also require replacement

Electronic main control board that manages core refrigerator functions and the user interface. Installing this replacement restores control of compressor, fans and diagnostics when a failed board causes power, cooling, or display issues. What it does:

• Regulates compressor and fan operation — symptoms: refrigerator not cooling, runs continuously, or cycles erratically.
• Manages user controls and display signals — symptoms: unresponsive buttons, blank or erratic display, or control panel errors.
• Controls defrost timing and related outputs — symptoms: frost buildup, excessive ice, or inconsistent temperatures.
• Communicates with sensors and other modules to coordinate normal operation — symptoms: intermittent operation or fault codes.

• Always disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the board by the edges and avoid static discharge; use a grounded wrist strap if available.
• The part number on the original board matches WB27X35345 before installing.