Parts for Lg LSG4513ST: Controller Parts

Replace a cracked or slipping control knob with this knob assembly to restore smooth, precise control of your appliance's settings. A quick swap brings back firm engagement and clear alignment on the control shaft.

• Mounts onto the control shaft to select functions and adjust levels
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores tactile feel and pointer alignment for accurate adjustments
• Common signs: knob spins freely, wobbles, sticks, or won't stay on

• Disconnect power before servicing; also shut off gas supply
• Pull the old knob straight off the shaft; do not pry against the panel
• Align the flat/D-shaft orientation and press the new knob on fully
• Verify smooth operation through the full range after installation

This is a control knob assembly for the cooktop. It replaces a worn or broken surface burner knob so you can accurately turn the burner on/off and adjust flame or heat levels.

• Rotates the surface burner valve stem to control heat output
• Restores proper feel and visibility if the original knob is cracked, stripped, or missing
• Helps address issues like slipping, hard-to-grip, or misaligned knobs
• Durable molded construction with a stainless-look finish to match the console

• Disconnect power and allow the cooktop or range to cool before service
• Pull the old knob straight off the valve stem; align the flat on the new knob and press firmly
• Do not force—verify stem orientation to prevent damage
• Test each burner for proper engagement and smooth rotation after installation

The PCB Assembly, Sidekey is an OEM replacement part for LG  ranges. This printed circuit board assembly is responsible for controlling the functions of the control panel on the side of the range. It communicates with all electronic components to operate the cooktop burners, oven lights and fans, and programming features.   

Causes of a bad PCB assembly can include corrosion of printed circuits over time due to heat exposure, moisture damage, or component failure.

Symptoms of a bad PCB assembly include: 

• Cooktop burners not working properly or unresponsive to control panel commands
• Inability to turn on oven lights or fans
• Programming features like timers or temperatures not functioning correctly
• Blank or unresponsive control panel displays

This OEM LG part is also compatible with Sears/Kenmore ranges. Replace yours today with this genuine electronic control board and upgrade the functionality of your electric range oven.

This PCB assembly is the appliance's main control board that manages cycle commands, sensor signals and user inputs to keep the appliance operating correctly. Replacing a faulty board restores control and communication functions. What it does:

• Receives inputs from the control panel and sends commands to motors, valves and heaters
• Monitors sensor signals and timing functions to coordinate cycles
• Stops operation or causes errors if the board fails or loses power
• Common symptom link: unresponsive controls, error codes, or appliance that won't start

• One PCB assembly (control board)

• Disconnect power before starting and verify power is removed to avoid shock
• Handle the board carefully and avoid touching components or connectors; observe electrostatic discharge (ESD) precautions
• Inspect connectors and wiring for damage and ensure secure connections during reassembly

This control board assembly directs power and communication to key components, interpreting inputs and sensor signals so the appliance runs the correct functions and cycles. Replaces a failed electronics module to restore reliable operation.

• Distributes power and control signals to major components per the unit's programmed logic
• Interfaces with sensors and the user controls to execute selected functions
• Coordinates cycle timing and safety monitoring
• Common signs of failure: no power or won't start, unresponsive controls/display, intermittent operation, error codes, or unexpected shutdowns

• Disconnect power to the appliance before servicing
• Handle the board by the edges; use ESD protection to avoid static damage
• Photograph and label connectors, then transfer them one at a time to the new board
• Secure wiring to avoid pinching; follow the unit's tech sheet or service manual

This packing gasket is the flexible door seal that helps maintain a tight closure for the appliance compartment, keeping cold air in and warm air out to protect stored food and improve efficiency. What it does:

• Seals the door to prevent cold air from leaking and reduce temperature fluctuations
• Helps stop frost buildup around the door opening
• Reduces compressor run time caused by air leaks
• Restores proper door contact when the original gasket is torn, brittle, or misshapen

• One packing gasket

• Disconnect power to the appliance before starting work
• Remove the old gasket and clean the mounting surface before installing the new gasket
• Warm and flex the gasket as needed to seat it evenly; align fully around the door for a continuous seal

This control panel is the front user interface that lets you select cycles and settings so the appliance responds to commands and displays status. It replaces a cracked, faded, or unresponsive front control surface to restore normal operation. What it does:

• Houses the touchpad/buttons and display area that register user input and show cycle status.
• Allows selection and confirmation of wash/dry cycles, options, and settings.
• Commonly replaces panels that are cracked, scratched, or have worn-off markings.
• Can resolve issues where buttons do not respond or the control surface is damaged.

• Disconnect power to the appliance before beginning any work to avoid shock.
• Replacement typically requires removing the top or front trim and a few screws; handle the panel gently to avoid damaging the display or bracket tabs.
• Keep screws and small parts organized and verify alignment before tightening.

The Oven Selector Knob Supporter is an OEM replacement part for LG ovens. It is a crucial component that provides structural support and ensures proper functioning of the oven selector knob mechanism.

Symptoms of a bad oven selector knob supporter:

• Loose or wobbly oven selector knob
• Difficulty in turning or selecting oven functions
• Knob becoming detached or falling off
• Misalignment or binding of the knob mechanism

Causes of a faulty oven selector knob supporter can include physical damage, wear and tear over time, or manufacturing defects that compromise its structural integrity or alignment.

This OEM LG part is also compatible with Sears/Kenmore ovens.

This single wiring harness connects appliance components to route power and signals reliably, restoring electrical continuity for normal operation. It's a direct-fit replacement when the original harness is damaged or corroded. What it does:

• Carries power and control signals between components so circuits complete and controls respond
• Replaces frayed, burned, or broken wiring that can cause intermittent operation or loss of function
• Helps stop shorts, arcing, or connector-related failures when the original harness is compromised
• Matches OEM connector types and pin arrangements for an accurate replacement

• Disconnect power (unplug appliance or switch off breaker) before beginning any work
• Handle connectors gently; avoid pulling on wires—release locking tabs first
• Route and secure the harness away from hot surfaces and moving parts to prevent wear

This single wiring harness routes electrical power and signals between components to restore proper connections and reliable operation. It replaces a damaged or worn harness to help eliminate intermittent power or control issues. What it does:

• Transfers power and control signals between appliance components to maintain proper function
• Replaces frayed, burnt, or damaged wiring that can cause intermittent operation or component failure
• Helps resolve symptoms like loss of power to a module, erratic behavior, or failure to respond
• Provides a direct plug-and-play connection when matching the correct factory harness

• Disconnect all power (unplug or switch off circuit breaker) before starting any work
• Handle connectors gently and seat firmly until they click into place

This is a single wiring harness that routes power and signals between appliance components to restore reliable electrical connections. It replaces a damaged or worn harness so controls and features can communicate properly. What it does:

• Carries power and control signals between specific components
• Restores interrupted circuits that can cause intermittent operation or component failures
• Helps resolve symptoms like no power to a component, inconsistent function, or error codes tied to open/shorted wiring
• Provides factory-style connectors for a direct fit and reliable connections

• Disconnect power (unplug or turn off breaker) before installing to avoid shock or damage
• Inspect connectors and routing, match connector types and wire colors before connecting
• Avoid pinching or sharply bending wires; secure harness using existing clips or ties

The PCB Supporter is an OEM part for LG ranges and cooktops. It securely mounts and positions the printed circuit board controlling cooking functions.

Causes of a bad PCB Supporter can include cracking or breaking of mounting clips over time due to normal range vibrations and use.  

Symptoms of a bad PCB Supporter include:

• The control board detaching during use
• Intermittent power to heating elements or displays
• Error messages regarding electrical component issues

This OEM LG part is also compatible with some Kenmore models.

The Spring is an OEM replacement part for LG ranges. Located within the oven door mechanism, this coiled metal spring helps counterbalance the weight of the door for smooth opening and closing. 

Causes of a bad spring can include fatigue from repeated compression cycles over several years, as well as stretching or damage from forced closure of an overloaded door. 

Symptoms of a bad spring include:

• Difficulty lifting or closing the oven door
• Sagging or misaligned door that doesn't stay shut  
• Loud squeaking or rubbing noises during use
• Broken, loose, or stretched coils losing tension  

This OEM LG part is also compatible with Sears Kenmore ranges and select GE models.

This replacement glass window fits the appliance door, restoring a clear viewing area and protecting the interior. It helps maintain door integrity and appearance after cracks, chips, or impact damage. What it does:

• Replaces cracked, chipped, or broken door glass to restore visibility and safety
• Stops drafts, rattling, or moisture intrusion caused by damaged glass
• Restores the appliance's finished appearance after impact or wear
• Works with the existing door assembly when installed correctly

• Disconnect the appliance from power (and water, if applicable) before beginning.
• Use gloves and eye protection; handle glass carefully to avoid cuts.
• Removing the door or door trim may be required; retain all fasteners and mounting clips.
• Only reuse gaskets or seals if undamaged; replace if torn or compressed.

The Thermostat is an OEM part for LG microwaves. This part monitors and regulates the temperature within the appliance. The thermostat ensures that the microwave does not overheat, automatically shutting off the power if the internal temperature exceeds safe levels. This preventive measure helps to avoid damage to the microwave and potential safety hazards in the kitchen. 

Causes of a bad thermostat can range from normal wear and tear, which may cause the component to lose its calibration over time, to overheating incidents that permanently damage its sensitivity.

Symptoms of a bad Microwave Thermostat include:

• The microwave unexpectedly turning off during use
• The microwave failing to start
• Inconsistent cooking temperatures or unevenly cooked food

This OEM LG part is also compatible with some Kenmore models.