Parts for Ge GTWS8650D0WS: 01 - Controls & Backsplash Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement badge is the small logo emblem that mounts to the appliance exterior to restore original appearance and branding. It provides a clean, professional look when the original emblem is missing, faded, or damaged. What it does:

• Replaces a missing, cracked, or faded exterior logo emblem
• Restores factory appearance on doors, panels, or control bezels
• Helps identify the appliance and maintain resale value
• Cosmetic-only part; does not affect appliance operation

• Surface-mount installation; may use adhesive or snap-fit depending on model—inspect original attachment method before installing
• Clean and dry mounting surface thoroughly for best adhesion
• Handle carefully to avoid scratching finished surfaces

This SCR (silicon controlled rectifier) controls high/low heater power in compatible appliances to regulate heating output and cycling. It replaces a failed control rectifier to restore proper heater switching and stable operation. What it does:

• Regulates current to the heater by switching between high and low power states
• Helps maintain correct heating cycles and temperature control
• Commonly replaced for symptoms like no heat, intermittent heating, or uneven heat output
• Used as part of the appliance's control power stage to ensure reliable operation

• One SCR control rectifier (WH02X10390)

• Disconnect power at the breaker before attempting service to avoid shock
• Handle the part carefully; avoid touching terminals and use proper tools

This power line filter sits between household AC and the washer's internal wiring to reduce electrical interference and help stabilize control operation. Replacing a failed filter may restore power and prevent nuisance breaker or GFCI trips.

• Filters incoming AC power to reduce electromagnetic interference reaching the control and motor circuits
• Helps prevent interference-related issues like erratic controls or random resets
• Failure may present as no power/blank display, intermittent power loss, or tripping a breaker/GFCI
• Visual clues of failure can include scorching, swelling, or a cracked housing

• Unplug the washer or switch off the circuit breaker before servicing; allow a few minutes for internal components to discharge
• Access the filter location (often near the control area or rear panel) per your model's service information
• Note wire locations (LINE, LOAD, and GROUND) and move one lead at a time to avoid miswiring
• Mount securely and ensure the ground connection to the cabinet is tight for proper operation

This electronic control board with pre-loaded firmware manages a refrigerator's operational functions and user interface, restoring reliable cycle control and status reporting when the original control fails. What it does:

• Replaces the main control that runs compressor, defrost, fans and other timed cycles
• Restores firmware-based logic for temperature management and user commands
• Can resolve symptoms such as unresponsive touch controls, incorrect cycle behavior, or error codes related to the main control
• Works with the appliance's existing wiring harness and sensors to re-establish normal operation

• One control and firmware assembly

• Disconnect power before servicing to avoid shock or damage
• Handle the control board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify wire connections and harness seating during installation; do not force connectors
• If the appliance requires module programming or pairing, follow the manufacturer's service instructions

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This electronic control board with pre-loaded firmware manages a refrigerator's operational functions and user interface, restoring reliable cycle control and status reporting when the original control fails. What it does:

• Replaces the main control that runs compressor, defrost, fans and other timed cycles
• Restores firmware-based logic for temperature management and user commands
• Can resolve symptoms such as unresponsive touch controls, incorrect cycle behavior, or error codes related to the main control
• Works with the appliance's existing wiring harness and sensors to re-establish normal operation

• One control and firmware assembly

• Disconnect power before servicing to avoid shock or damage
• Handle the control board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify wire connections and harness seating during installation; do not force connectors
• If the appliance requires module programming or pairing, follow the manufacturer's service instructions

The User Interface Harness is an OEM part for GE washing machines. It connects control board electronics to the machine interface like buttons, lights and displays.

Causes of failure may include damaged or severed wiring from vibration fatigue or sharp edges inside the appliance over many use cycles. Corroded contacts can also impair signal transmission.

Symptoms are:

• Unresponsive buttons and displays
• Inability to select desired cycles or options
• Flickering or malfunctioning status lights
• Control panel errors or code messages

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

8-18 hi/lo 5/8

This tub light assembly provides interior illumination so you can see inside the washer tub for loading, unloading, and inspecting clothes. It replaces a worn, cracked, or non-working tub light to restore visibility. What it does:

• Houses the lamp that lights the interior of the washer tub for easier loading and unloading
• Replaces a burned-out or flickering tub light
• Helps you spot small items, stains, or foreign objects inside the drum
• Restores safe, reliable interior lighting when the original lens or lamp fails

• One tub light lamp assembly

• Disconnect power to the appliance before beginning any service
• Access typically requires removing the console or tub trim
• Handle lens and bulb carefully to avoid damage; use proper replacement bulb if separate

The Harness Motor is an OEM part for GE washing machines. As a key sub-harness, it delivers critical power signals from the control system to operate the drive motor. Proper communication is essential for the motor to run cycles efficiently.

Symptoms of a failed harness motor include:

• Inability to start or complete agitation or spin functions  
• Drive motor runs intermittently or at improper speeds
• Odd noises or vibrations emanating from the motor 

Potential causes relate to cracking, pinching, or severed wires from repeated door openings and closures over many cycles of use. Corrosion inside the casing from moisture exposure can also disrupt conductivity.

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Installing an OEM harness motor ensures dependable motor operation via solid electrical pathways to cycling systems reliably wash after wash.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.