Parts for Ge GTWS8650D0WS: 02 - Top Panel & Lid Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Size: 8 - 18 ab.

This Lid Lock Service Kit replaces the washer lid lock assembly to restore a secure latch and allow normal cycle operation. It helps prevent the lid from opening during spin for safe, reliable use. What it does:

• Replaces a worn or damaged lid lock assembly so the lid secures during spin cycles
• Can resolve symptoms like the washer not starting, stopping mid-cycle, or showing lid-lock related errors
• Restores the mechanical/electrical interface that detects and locks the lid for safe operation
• Works as a direct replacement for the original lid lock components

• Disconnect power to the washer before starting any repairs to avoid electrical shock
• Access and remove the existing lid lock per the parts diagram; handle wiring connectors and fasteners carefully
• Verify proper alignment of the latch and test the lid lock function through a diagnostic or a short test cycle after installation

This lid lock bezel is the molded trim that snaps into the washer's top panel opening and holds the lid lock in place. Replace a cracked or missing bezel to keep the lock secure and ensure consistent lid-closed detection during cycles.

• Secures and aligns the lid lock within the top panel opening
• Covers the cutout for a finished look and protected edges
• Helps prevent the lock from wobbling or falling through the opening
• Common signs of failure: broken/missing bezel, loose lid lock, intermittent "lid open" errors, or cycles that won't start because the lock can't seat

• Disconnect power and water supply before service
• Lift or hinge the top panel per model instructions to access the lock from below
• Detach the lid lock from the underside, release the old bezel tabs, and remove
• Snap in the new bezel, reinstall the lock with proper orientation, and test operation

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This spring-style hose clamp secures flexible appliance hoses to fittings to prevent leaks and hose separation. Replaces worn or damaged clamps to restore a tight, reliable hose connection. What it does

• Holds drain, inlet, or discharge hoses firmly to prevent leaks at fittings
• Stops hoses from slipping off during appliance operation or vibration
• Commonly replaced when rusted, stretched, or visibly damaged
• Helps eliminate intermittent leaks and water pooling under the appliance

• One hose clamp

• Disconnect power and water supply, and drain residual water before starting
• Use pliers to expand the spring clamp for removal and installation
• Ensure clamp sits squarely over the hose and fitting bead for a secure seal
• Replace with the same style and size; do not overtighten or modify the clamp

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

This flat washer seals the water valve connection to help prevent leaks and ensure a reliable water supply. It's a simple replacement that restores a watertight seal where the valve meets the hose or fitting. What it does

• Creates a flat, compressible seal at the water valve connection to stop drips and leaks.
• Replaces a worn or flattened washer that can cause slow leaks or pooling under the appliance.
• Helps maintain proper water flow by ensuring a tight, leak-free joint.
• Useful when replacing or servicing the inlet valve or supply fittings.

• Turn off water supply and unplug the appliance before replacing the washer.
• Inspect mating surfaces and the valve seat; clean debris before installing the new washer.
• Seat the washer flat against the connection and tighten fittings by hand, then snug with a wrench—avoid overtightening.
• If leaks persist after replacement, recheck seating and replace damaged fittings or seals as needed.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.