Parts for Ge GTW750CPL0DG: Controls & Backsplash Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This decorative badge is the exterior emblem that mounts to the appliance cabinet or door to restore factory appearance and identification. It replaces a missing, faded, cracked, or detached emblem for a clean, finished look. What it does:

• Replaces a worn, damaged, or missing appliance emblem
• Restores original exterior appearance and branding visual
• Prevents loose badges from catching on clothing or edges
• Designed to match OEM fit and finish for a seamless look

• Typically installs on the appliance front using clips or adhesive
• Clean and dry the mounting surface before installing to ensure proper adhesion or fit
• Avoid excessive force when seating the badge to prevent damaging trim or clips
• Wear gloves to protect finish and follow general appliance-safety practices

The Start Capacitor is an OEM part for GE washing machines. It is comprised of a bracket and capacitor, which work together in the motor control circuit to start and run the drive motor. The capacitor provides a phase shift that allows for smoother operation of the electric motor.

Symptoms of a bad Start Capacitor include:

• The washer fails to agitate or spin clothes
• An electric burning smell coming from the motor or control board  
• The drive motor makes buzzing or humming noises during the operation

Causes of failure can be normal component degradation over time. Exposure to moisture, physical damage, or operating the machine with an unbalanced load can also stress the capacitor prematurely. 

This OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Start Capacitor is an OEM part for GE washing machines. It is comprised of a bracket and capacitor, which work together in the motor control circuit to start and run the drive motor. The capacitor provides a phase shift that allows for smoother operation of the electric motor.

Symptoms of a bad Start Capacitor include:

• The washer fails to agitate or spin clothes
• An electric burning smell coming from the motor or control board  
• The drive motor makes buzzing or humming noises during the operation

Causes of failure can be normal component degradation over time. Exposure to moisture, physical damage, or operating the machine with an unbalanced load can also stress the capacitor prematurely. 

This OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

This backsplash assembly kit replaces the rear backsplash on compatible electric and gas ranges to restore a finished look and protect the wall behind the cooktop. It helps cover wiring and controls routed behind the console. What it does:

• Replaces a damaged, bent, or missing backsplash panel to restore appearance
• Provides a protective barrier behind the cooktop and control console
• Helps keep wiring and control components covered and secure
• Reduces gaps where smoke, grease, or debris could collect

• One backsplash assembly kit

• Power to the range should be turned off at the breaker before starting work
• Some models may require removal of the cooktop or control console to access mounting points
• Use included hardware; do not force parts to fit

This left backsplash support secures the left side of a range or stove backsplash, keeping the backsplash aligned and stable for safe, reliable operation. It replaces a bent or broken support to restore proper fit and appearance. What it does:

• Holds and supports the left edge of the backsplash to prevent sagging or separation
• Restores proper alignment so control panels and trim sit flush
• Helps stop rattling or vibration caused by a damaged support
• Commonly replaced when the support is bent, cracked, or missing

• Install with the appliance unplugged and controls off; disconnect power at the breaker for electric ranges.
• Depending on model, you may need to remove the backsplash trim or rear panel to access mounting points.
• Use correct-size fasteners and verify secure attachment; avoid overtightening to prevent cracking.

This right-side backsplash support secures the range's backsplash to the cooktop, restoring proper alignment and stability so the backguard sits firmly and reduces wobble or gaps. Designed to fit the OEM mounting points. What it does

• Holds the right side of the backsplash in place so the backguard stays aligned with the cooktop
• Prevents the backsplash from leaning, rattling, or separating from the range
• Restores proper mounting after impact, wear, or missing/broken fasteners
• Works with the range's existing screws and mounting brackets to re-establish a solid fit

• One right-side backsplash support

• Disconnect power to the appliance before starting any repair
• Remove the backguard or access panel per manufacturer instructions to reach mounting area
• Use basic hand tools (screwdriver/socket) to remove and replace fasteners; keep original screws if reusable
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

This knob assembly replaces a worn, broken, or missing control knob so you can reliably select heat or settings on your range or cooktop. It restores safe, accurate user control and a finished appearance. What it does:

• Fits onto the control shaft to allow turning the switch for burner/oven settings
• Restores tactile grip and clear position selection when the original had stripped or cracked
• Helps stop slipping or intermittently losing contact between the user and the control
• Suitable for use where the original knob assembly is damaged or missing

• Disconnect power (or turn off gas appliance supply) before servicing controls.
• Push the knob straight onto the control shaft until fully seated; pull straight off to remove.
• Inspect the switch/shaft for damage; replace the switch or shaft if the knob does not seat securely.

The User Interface and Control Board with WiFi is an OEM part for GE washing machines. As the central processing unit, it operates all wash cycle and programming functions while enabling WiFi connectivity for remote start capabilities.

Causes of failure can include moisture damage compromising electrical components, short circuits from age or excessive wear/stress, or incompatibility issues preventing communication between newer interfaces and older machines.

Symptoms include: 

• Fault codes displayed 
• Non-responsive buttons and displays
• Inability to start or stop cycles remotely 
• Failure to advance through wash phases

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models featuring WiFi home connectivity.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This jumper harness is an OEM-style electrical connector harness that restores reliable connector-to-connector wiring between components. It replaces a worn or damaged harness to help re-establish proper electrical connections and operation. What it does:

• Links two or more electrical connectors to complete a circuit between controls and components.
• Replaces damaged, frayed, or corroded wires that can cause intermittent operation or loss of power.
• Commonly used when console, control board, or component-to-component connections fail or show error symptoms.
• Helps eliminate open circuits and poor connections that trigger faults or prevent operation.

• One jumper harness as shown

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Match connector shapes and wire colors before connecting; do not force connectors together.
• Route and secure the harness away from moving parts and heat sources; use existing clips or ties.

8-18 hi/lo 5/8

This is a 8-18 x 1/2 inch hex washer head screw used to secure appliance panels and components. It provides a reliable, corrosion-resistant fastener for repair or reassembly tasks. What it does:

• Fastens panels, brackets or trim where an 8-18 x 1/2" screw is specified
• Hex washer head offers wider bearing surface to prevent pull-through
• Stainless finish resists rust and corrosion in humid appliance environments
• Restores proper fit and function when original screw is missing or damaged

• One 8-18 x 1/2 in. hex washer head stainless screw

• Use the correct driver/socket to avoid stripping the head
• Tighten securely but avoid over-torquing to prevent damage to plastic or thin metal parts
• Disconnect power and follow appliance safety precautions before working inside the unit
• Replace only with the same size and head style for proper fit

This replacement screw fastens appliance panels, brackets, and trim. The 8-18 thread with 1-3/4-inch length provides reliable bite in sheet metal or plastic, restoring a secure fit when an original fastener is missing or damaged.

• Secures panels, brackets, and trim to the cabinet or frame
• Replaces lost, stripped, or corroded fasteners
• Helps address loose or rattling panels, minor gaps, or misalignment
• Appropriate for sheet-metal applications that require ~1-3/4-inch reach

• Disconnect power before servicing; wear cut-resistant gloves
• Support the panel or part being fastened and use the correct driver for the screw head
• Start threads by hand to avoid cross-threading; do not overtighten into plastic or thin metal
• Repair or replace the anchor before installing

The Lid Lock Wiring Harness is an OEM part for GE washing machines. It connects the lid lock mechanism to the washing machine’s control board, ensuring proper communication and functionality. This wiring harness is crucial for the safe operation of the washer, as it ensures the lid remains locked during certain cycles to prevent accidental openings and maintain safety.

You should replace the lid lock wiring harness if it becomes faulty. Causes of a bad wiring harness can include regular wear and tear, electrical faults, or damage from impacts or pinching. A damaged wiring harness can lead to communication errors between the lid lock and control board, resulting in improper functioning of the lid lock mechanism.

Symptoms of a bad lid lock wiring harness include:

• The washing machine not starting or stopping mid-cycle
• The lid not locking or unlocking properly
• Error codes related to the lid lock mechanism
• The washer not responding to control inputs

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Power Cord is an OEM part for GE washers. It provides the crucial connection, transmitting electrical current from the wall outlet to power the washer components and functions. Ensuring the integrity of this cord is vital for safe and reliable operation. 

Symptoms of a bad power cord include:

• Frayed, cracked, or exposed copper wiring 
• Loose connections at either end
• Buzzing, sparks, or shocks felt around the cord
• The washer fails to power on as expected

Causes can be normal flexing wear over thousands of cycles, damage from pinching, rodents, or excess tension on the cord. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.