Parts for Ge GHWS3605F0RR: Controls & Dispenser Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Restore easy, precise cycle selection with this washer control knob. The rubberized knob replaces a cracked or stripped original so you can securely grip and turn the selector without slipping or wobbling.

• Replaces the washer's main control/selector knob
• Rubberized surface improves grip and control
• Mounts on the D-shaped control shaft to turn the timer/control
• Common symptoms: knob cracked, loose or spinning freely, missing, can't change cycles

• Disconnect power before servicing the appliance
• Pull the old knob straight off; avoid prying against the control panel
• Align the flat on the new knob with the shaft and press until fully seated
• The knob engages the shaft and rotates the control smoothly

This knob retainer secures a control knob to its switch/timer shaft, keeping your selections engaged and the knob firmly in place. Replace a worn or missing retainer to restore a solid feel and dependable operation.

• Holds the control knob securely on the switch/timer shaft
• Restores positive engagement when turning the knob
• Common fix for a loose, slipping, wobbly, or falling-off knob
• Helps resolve intermittent selection when the knob doesn't grip the shaft

• Disconnect power before servicing
• Pull off the knob to access the retainer
• Align the new retainer with the shaft and press firmly until fully seated
• Reinstall the dial/knob and verify proper engagement

This screw is a direct-fit fastener used to secure appliance panels and components for stable, rattle-free operation. Replacing a stripped, missing or worn screw restores proper part alignment and prevents vibration or loose trim. What it does:

• Secures panels, trim pieces or small components to the appliance frame
• Prevents rattling or movement caused by missing or loose hardware
• Restores proper alignment for switches, panels or covers
• Works as a replacement for a single lost or damaged mounting screw

• Disconnect power and water before beginning any repair
• Use the correct screwdriver bit to avoid stripping the head
• Start threads by hand, then tighten snugly — avoid over-tightening
• Keep removed hardware in a labeled container to avoid loss

This OEM part is a washer user interface board assembly. It is the main control board that powers the control functions of the washer. Over time, a washer user interface board assembly can become inoperable after excessive use. If the washer is no longer turning on or the buttons are no longer responsive to touch, then the interface board assembly will need to be replaced. To replace this part, start by shutting off all power to the washer by either unplugging it or turning off the circuit breaker. Once it has been powered off, proceed to remove the control panel of the washer. This can be done using a flathead screwdriver or putty knife. Gently lift on the panel until it is released from its mounting tabs. Once removed, locate the user interface board assembly and unthread the screws that attach it to the control panel. Replace the old board with the new board and reinstall the control panel.This genuine replacement part is sourced directly from the manufacturer and is sold individually. It is compatible with General Electric, Hotpoint, and RCA brand appliances.

This 10-18 Hi/Lo hex-washer screw is a direct-use replacement fastener for appliance panels, brackets and components. It restores secure mounting and helps stop loose trim, rattling or parts that shift during use. What it does:

• Secures panels, trim pieces, mounting brackets and similar components that use a 10-18 thread with a hex-washer head
• Restores proper fit where screws are missing, stripped, or corroded
• Helps eliminate rattling, vibration noise, and misaligned parts caused by loose fasteners
• Matches OEM head and thread style for a correct mechanical fit in specified locations

• Turn power or gas to the appliance off before working on electrical or gas-equipped units; unplug when applicable
• Use the correct sized hex driver or socket to avoid rounding the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging thin sheet metal
• If replacing multiple fasteners in a load-bearing area, replace all to ensure even fit and alignment

This drawer body dispenser is the molded housing that holds and supports the refrigerator dispenser assembly, restoring a secure, leak-free enclosure for water and ice delivery. Fits the dispenser opening and provides the mounting for internal components. What it does:

• Houses the dispenser components and provides structural support for the dispenser assembly
• Directs water/ice flow and helps maintain a sealed path to prevent leaks
• Replaces cracked, warped, or damaged dispenser housings that cause wobble or leakage
• Helps restore proper alignment of the dispenser chute and mounting points

• One drawer body dispenser housing

• Disconnect power and turn off the water supply before beginning
• Handle the housing carefully to avoid damaging mounting tabs or seals
• Transfer any gaskets, brackets, or internal components from the old housing
• Test the dispenser and check for leaks after reassembly and restoring power/water

A replacement siphon cap that seals the end of a siphon or drain tube to help prevent leaks and maintain proper drainage. Fits into the siphon assembly to keep water routed where it should for reliable operation. What it does

• Seals the siphon/drain tube connection to help prevent water leaks or drips
• Helps maintain proper siphon action and drainage performance
• Keeps contaminants out of the siphon opening
• Restores a secure connection when the original cap is cracked or missing

• One replacement siphon cap

• Disconnect power and shut off water to the appliance before starting
• Remove any tubing carefully; inspect mating surfaces for damage or debris
• Press the cap into the siphon tube/port until fully seated; confirm a snug fit
• After installation, restore power/water and check for leaks during a short test cycle

This cup siphon is the dishwasher detergent siphon cup that helps move detergent from the dispenser into the wash cycle for consistent cleaning performance. Replaces a damaged or worn detergent siphon cup. What it does

• Channels liquid or powdered detergent from the dispenser cup into the washer during the appropriate cycle.
• Prevents detergent from remaining trapped in the dispenser, helping restore proper wash chemistry.
• Commonly used when detergent isn't dispensing, the dispenser cup leaks, or the dishwasher leaves residue on dishes.
• Simple, literal replacement part — restores the dispenser's intended detergent flow.

• One detergent cup siphon.

• Disconnect power and water to the appliance before servicing.
• Remove the old dispenser assembly per your user/service manual; this part typically installs into the dispenser housing and secures by clip or press-fit.
• Handle plastic components carefully to avoid cracking; replace any damaged clips or seals as needed.

The dispenser drawer retainer secures the detergent/softener drawer in the washer housing so it opens smoothly without pulling all the way out. Replace a cracked or missing retainer to restore proper drawer alignment and retention.

• Holds the dispenser drawer in position and limits travel
• Helps prevent the drawer from falling out when opened
• Maintains alignment for smooth opening and closing
• Common symptoms: drawer pops out, won't stay seated, wobbles, or shows broken/missing clip

• Disconnect power and shut off water before servicing
• Pull the dispenser drawer out; depress the release to remove it
• Note the retainer's orientation, release its locking tabs, and snap in the new part
• Reinstall the drawer and test for smooth operation without forcing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement badge is the small logo emblem that mounts to the appliance exterior to restore original appearance and branding. It provides a clean, professional look when the original emblem is missing, faded, or damaged. What it does:

• Replaces a missing, cracked, or faded exterior logo emblem
• Restores factory appearance on doors, panels, or control bezels
• Helps identify the appliance and maintain resale value
• Cosmetic-only part; does not affect appliance operation

• Surface-mount installation; may use adhesive or snap-fit depending on model—inspect original attachment method before installing
• Clean and dry mounting surface thoroughly for best adhesion
• Handle carefully to avoid scratching finished surfaces

This small closed grommet seals and cushions a screw hole to protect wiring and reduce vibration. It prevents chafing where a fastener passes through a sheet-metal panel, helping maintain safe wiring and a quieter appliance. What it does:

• Seals a screw or bolt hole to keep wires and harnesses from rubbing on sharp edges
• Cushions and isolates vibration to reduce noise and wear
• Helps maintain a tight fit where panels or components meet
• Commonly used where a harness or lead passes through a chassis opening

• One closed grommet

• Inspect panel edges and harness before installing; replace if damaged
• Push grommet into the hole until fully seated; route wiring through the grommet
• Disconnect power to the appliance before any access or repairs

This O-ring is a small rubber sealing gasket designed to restore a watertight seal in the appliance where the original O-ring has worn, cracked, or gone missing. It prevents leaks and helps maintain proper water flow. What it does:

• Seals joints and hose connections to stop water leaks
• Restores proper sealing where a worn O-ring causes dripping
• Helps maintain consistent water pressure by preventing leaks
• Commonly replaced when removing or reinstalling water fittings or valves

• Inspect the mating surfaces for damage and clean thoroughly before installing
• Lubricate with food-safe silicone grease to ease installation and preserve the seal
• Ensure correct seating in the groove; do not stretch excessively when fitting
• Disconnect power and shut off the water supply before servicing water connections

This genuine replacement clamp secures flexible hoses to fittings to keep connections tight and help prevent leaks and disconnection. It restores a secure seal for appliance water or vent hose connections. What it does:

• Holds a rubber or plastic hose tightly onto a spud or nipple to prevent leaks and slips
• Helps stop water or air from escaping at hose connections
• Reduces vibration and hose movement that can wear connections over time
• Commonly used where a small, durable clamp is needed on supply, drain or vent hoses

• Disconnect power and turn off water supply before beginning work
• Remove the old clamp with pliers or a screwdriver, then position the new clamp evenly over the hose end
• Tighten or crimp per the clamp style until the hose is snug but not pinched
• Inspect the connection for leaks after restoring power/water

A small replacement clamp that secures hoses and prevents leaks or disconnections. Use this clamp to restore a tight, vibration-resistant connection where a hose or flexible line needs fastening. What it does

• Holds a washer, dryer, dishwasher or refrigerator hose or flexible line in place to prevent leaks and blow-offs
• Reduces vibration and movement that can cause wear or fraying of hoses
• Restores a loose or missing fastening point that can allow fluid or air escape
• Simple mechanical function—no electrical components

• One clamp

• Turn off and unplug the appliance and shut off water or supply lines before starting work
• Confirm hose orientation and seat hose fully before sliding the clamp into position
• Use the correct clamp tool or pliers to compress/secure the clamp without distorting it
• Replace any worn or damaged hoses or fittings when installing this clamp

This manual dispense body assembly replaces the dispenser body that directs water through a refrigerator's exterior dispenser. It restores proper dispensing control and helps stop leaks or poor flow at the dispenser outlet. What it does:

• Replaces the dispenser body that channels water to the door-mounted dispenser valve and spout
• Helps stop leaks or dripping at the dispenser area when the body is cracked or worn
• Restores stable lever/actuator engagement for reliable manual dispensing
• Addresses symptoms like slow or intermittent dispensing and water pooling at the door

• One manual dispense body assembly

• Disconnect power and shut off the water supply before beginning work
• Replacement typically requires removing the refrigerator door/dispenser trim to access mounting hardware
• Handle gently to avoid damaging the dispenser actuator or water fittings; inspect gaskets and seals and replace if damaged
• After installation, restore power and water, check for leaks, and operate the dispenser to confirm proper function

This SCR 6-19 thyristor is a board-mounted power control component used on compatible appliance control boards to regulate current to heating and motor circuits. Replacing a faulty SCR restores proper power switching and stable operation. What it does:

• Controls/rectifies power to heating elements or motor circuits on the control board
• Allows timed or variable power delivery as directed by the appliance control electronics
• A failed SCR can cause no heat, intermittent heating, or loss of controlled motor/power functions
• Works as the switching element for the board's high-current paths

• One SCR 6-19 thyristor

• Disconnect power at the breaker or unplug the appliance before servicing
• Board-level replacement may require desoldering/soldering skills or a hot-air rework station
• Handle the part and PCB with ESD precautions; avoid touching leads

This replacement hose routes cleaning fluid to the appliance's glass-cleaning assembly so the glass receives proper spray and rinsing. Keeps the glass-clean function working and helps prevent leaks from cracked or worn tubing. What it does

• Channels water/cleaning solution between the pump and the glass-cleaning nozzle or manifold.
• Restores proper spray pattern when worn, clogged, or split hoses cause poor glass cleaning.
• Helps prevent leaks and pooling by maintaining a secure path for fluid flow.
• Works with the appliance's existing clamps and fittings to ensure a sealed connection.

• One replacement hose.

• Turn off power and shut off the water supply before starting any repair.
• Inspect hose ends and clamps; reuse OEM clamps if in good condition or replace with equivalent.
• Route the hose along the original path to avoid kinks and abrasion; secure to prevent contact with moving parts.

This silicon controlled rectifier (SCR) switches and regulates power in compatible appliance control circuits, helping the unit deliver correct power to heating elements or motors. It's a direct replacement component when the original SCR fails. What it does

• Acts as a solid-state switch that controls current flow to heating elements, motors or other high-current circuits.
• Fails open or shorted when worn; common symptom is loss of heating, intermittent power to the controlled component, or no operation on affected circuits.
• Provides fast, repeatable switching compared with electromechanical relays.
• Designed for stud-mount installation with insulated/marked terminals for correct wiring.

• One silicon controlled rectifier (SCR) as listed.

• Disconnect all power before accessing or replacing the SCR to avoid shock or equipment damage.
• Note terminal orientation and wiring before removal; replace with the same terminal/stud configuration.
• Avoid electrostatic discharge to the replacement part; handle by the body and avoid touching terminals.

A replacement 10-16 shoulder screw (Type A) used to secure appliance components where a shoulder/clearance is required. Restores proper alignment and fastening for panels, brackets, or assemblies that use a shoulder-style fastener. What it does:

• Provides a fixed shoulder to control depth and spacing between parts
• Secures panels, brackets, or moving parts while allowing an exact clearance
• Helps prevent over-driving and protects mating parts from damage
• Commonly used where precise alignment or rotation clearance is needed

• Inspect the mating hole and threads for damage before installing
• Use the correct driver and torque—do not over-tighten to avoid stripping
• Replace with the same screw type and size to maintain proper fit and clearance
• Disconnect power and follow all safety precautions when accessing internal components

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.