Parts for Frigidaire CFMV154CLSA: 05 - Controls,Door Parts

This is a replacement front control panel that restores the appliance's user interface and protects the underlying control assembly. It provides a clean mounting surface for buttons, display windows, and control components so you can operate the range reliably. What it does:

• Provides the exterior housing and mounting surface for the oven/range controls and display
• Protects internal control electronics from spills and debris
• Restores proper button/key alignment and access to control functions
• Can resolve symptoms like unresponsive buttons, missing or damaged panel surface, or a cracked/warped control area

• Turn off power to the appliance at the breaker before starting any repair
• Remove screws or clips holding the old panel and disconnect any attached harnesses carefully
• Handle the replacement panel gently to avoid scratching or bending; align connectors and fasteners before tightening

Replacement inside door panel that restores the refrigerator's inner door lining and helps secure door bins and insulation. Durable molded plastic improves interior appearance while protecting internal parts from moisture and daily wear. What it does:

• Serves as the refrigerator's inner door surface and mounting area for door shelves and bins.
• Protects insulation, wiring, and components inside the door from spills and debris.
• Replaces cracked, warped or stained inner door liners to restore a clean, finished look.
• Helps maintain proper door sealing by supporting the door structure and components.

• Disconnect power and empty the door before starting; some models require removing door shelves or the door assembly first.
• Panel may secure with screws or snap-in tabs—retain original fasteners and follow model-specific instructions.
• Handle edges carefully to avoid cuts; inspect door gasket and bin hardware after installation.

This door latch is the replacement latch assembly that secures and releases the appliance door for proper closing and sealing. Replacing a worn or broken latch helps restore reliable door closure and safe operation. What it does

• Engages and holds the appliance door closed to maintain an effective seal
• Releases the door when actuated so the door opens as intended
• Commonly replaces latches that are cracked, loose, or fail to catch
• Helps address issues like doors that won't stay shut or that sag when closed

• One door latch assembly

• Disconnect power before performing service to reduce risk of electric shock
• Use basic hand tools; access may require removing the door panel or trim
• Verify alignment and secure mounting screws so the latch operates smoothly

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This control panel is the front console trim that houses the touchpads and display, restoring a clean, functional user interface for your range or oven. It replaces cracked, faded, or damaged front console surfaces to improve operation and appearance. What it does:

• Provides the outer housing for oven/range controls, buttons, and display
• Restores proper button engagement and protects internal electronics from spills and debris
• Commonly replaced for cracked, warped, or discolored panels or when buttons are loose
• Helps resolve issues where the console face is physically damaged or missing

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove trim and mounting screws carefully; keep hardware for reinstallation
• Align tabs and clips gently to avoid breaking plastic; do not force parts into place
• Verify secure connections before restoring power

This front control panel is the user interface surface for the oven/range, giving you a clean, replaceable console that houses the touchpads/buttons and display area for normal operation and settings. What it does

• Provides the front surface and button openings for the range/oven control assembly
• Restores readable button legends and a firm surface for touchpads or mechanical buttons
• Commonly replaced when buttons wear, legends fade, or panel is cracked
• Helps address symptoms like unresponsive buttons, missing button labels, or cosmetic damage to the console

• One front control panel

• Disconnect power to the appliance before starting any repair
• Removal typically requires unscrewing trim and detaching the panel from the control housing; retain all fasteners
• Be careful handling edges and any attached trim to avoid cuts or damage
• This part is the external panel only; electronic control boards, overlays, or button assemblies must be transferred if needed

This Frame is an OEM part for Frigidaire microwaves. Designed to provide structural integrity and aesthetic appeal, this frame is a crucial component for the proper alignment and protection of the microwave's door and interface. 

The degradation of a microwave frame can occur due to physical impacts, frequent usage, material fatigue, or environmental factors. A compromised frame can affect the door alignment, sealing, and overall look of the microwave.

Symptoms of a bad frame include:

• Difficulty in opening or closing the microwave door.
• A visible gap or misalignment of the door.
• Cracks or breakages on the frame itself.
• Unusual noises when the door is in operation.
• The door not sealing properly, leading to heat loss or inefficient cooking.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This door handle assembly replaces a worn or broken stainless refrigerator door handle to restore a secure grip and the appliance's finished look. Durable stainless finish resists everyday wear and matches stainless doors. What it does:

• Replaces a cracked, loose, or missing refrigerator door handle so the door can be opened and closed safely
• Provides a solid grip and restores the appliance's exterior appearance
• Fits the outer door; secures to the door via factory mounting points
• Compatible with stainless-finish doors

• Basic hand tools required; avoid overtightening mounting fasteners to prevent damage
• Disconnect power only if required by your appliance's instructions; most handle replacements do not require wiring work
• Handle with care to avoid scratching the finish during installation