Parts for Ge ZGP366NT2SS: Cooktop Parts

Single fastening screw for range components. Replaces missing, stripped, or damaged screws that secure panels, brackets, and trim pieces in place.

Replacement burner cap for 18K high-output burners. Sits atop the burner head to shape and distribute the flame. Replace if cracked, chipped, or worn.

Uneven flames or poor ignition? This gas burner cap distributes flame evenly and protects the burner head from spills. Simple DIY install restores heat.

The Inner Cap Brass Cooktop is an OEM part for GE-sealed gas burners. Located under each burner head, it serves as the decorative protective barrier between the flame source and cooktop surface.

Symptoms of a bad inner cap brass include:

• Warped or misshapen shape from high heat exposure over time
• Heat discoloration detracting from aesthetic 
• Scratches, pitting, or burns on visible surfaces
• Failure to properly seat and seal under the burner head

Prolonged fiery combustion naturally causes metal fatigue and changes in material properties. This genuine GE replacement restores optimal heat deflection and a consistent surface level for safe and easy cleaning. Compatible GE and Monogram gas cooktop models maintain authentic factory finishes and performance.
 

Uneven flames or poor ignition? This burner cap sits atop the burner head to shape and shield the flame, restoring reliable ignition and even heating.

Uneven flame or won't ignite? This enamel outer burner cap distributes flame evenly across cookware and protects the burner head from spills. Quick fix.

This outer cap (AFB) fits the appliance's airflow/fan assembly and protects the blower opening while helping direct airflow. It restores proper clearance and prevents debris entry for more reliable operation. What it does:

• Covers and protects the blower/airflow opening to keep lint and debris out
• Helps maintain correct airflow direction through the blower assembly
• Can address noisy or restricted airflow symptoms when damaged or missing
• Restores proper fit and sealing around the fan area to reduce air leaks

• Disconnect power to the appliance before beginning any service
• Remove only the panels required to access the blower housing; keep track of fasteners
• Inspect surrounding seals and the blower for damage while replacing the cap

Fix uneven flames or ignition issues on your gas cooktop with this inner burner cap. Fits over the burner head center to shape flames and protect ports.

Weak or uneven flames? This burner head assembly restores proper heat distribution and flame control on gas cooktops. Clean ports regularly to maintain performance.

This burner head assembly delivers a focused, high-heat flame for a gas cooktop or range, restoring proper burner performance for even cooking. It replaces a worn or damaged burner head to help re-establish correct ignition and flame shape. What it does:

• Directs and shapes the burner flame for consistent heat output across cookware
• Works with the burner cap and valve to maintain steady ignition and flame height
• Commonly replaces burner heads that are cracked, corroded, or producing uneven flames
• Can resolve issues like weak flames, yellow tipping, or flame blowout under normal use conditions

• Turn off the gas supply and electricity to the appliance before starting any work.
• Remove grates and burner caps; lift out the old burner head and set the new piece in place—verify correct alignment with the valve or orifice.
• Keep parts and screws organized; tighten fittings just until snug to avoid damage.

Replace a cracked or corroded burner ring causing uneven flames or poor heating. This ring burner restores proper flame distribution on your cooktop.

Oven won't heat or takes forever to preheat? This gas range oven igniter glows hot to ignite the burner for baking and broiling. Moderate DIY repair.

Fix a gas cooktop that won't light or clicks continuously with this igniter. Common repair for burners that spark but don't ignite. Moderate difficulty.

Secures the igniter in its mounting bracket on gas ranges and cooktops. Replace if spring is missing, broken, or worn to restore proper igniter positioning.

This small metal clip secures the surface burner igniter in place on a gas range cooktop. It ensures the igniter stays properly positioned near the burner so it can reliably spark and light the gas. Replace this clip if your igniter is loose, misaligned, or falls out of position, which can cause inconsistent ignition or failure to light.

Replace a faulty spark electrode when your gas burner won't light or clicks continuously. This igniter creates the spark that ignites your burner.

Specs: 8-32 MCH PNT15

Cushions and stabilizes burner grates on your gas range or cooktop. Replace worn or missing feet to stop wobbling, reduce rattling, and protect surfaces from scratches. Confirm fit by model number.

Replace a cracked, warped, or missing burner grate on your gas cooktop or range. Provides sturdy support for cookware over the burner flame.

Black maintop surface panel for gas cooktops. Replaces cracked, warped, or damaged cooktop surfaces. Restores clean appearance and protects components.

Replacement 8-18 x 5/16 screw secures range panels, brackets, and components. Needed when original fastener is stripped, missing, or damaged.