Parts for Ge CGU366P3T2D1: Cooktop Parts

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal

The Burner, Large V2 is an OEM part for GE gas ranges. It is designed to provide a consistent and even flame for cooking, ensuring efficient heat distribution for large pots and pans.

Causes of a bad burner can include clogging from food spills, wear and tear from frequent use, or damage from cleaning processes. A malfunctioning burner can lead to uneven cooking and reduced heating efficiency.

Symptoms of a bad burner include:

• Uneven or weak flame
• Burner not igniting properly
• Sputtering or inconsistent flame
• Visible damage or clogging on the burner surface

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Base Burner is an OEM part for GE gas range and cooktops. It securely holds the burner assembly in place on the cooktop. 

Symptoms of a faulty base burner include:  

• Loose or wobbly burners that could tip or shift during cooking
• Difficulty cleaning accumulated debris from recessed areas  
• Potential gas or electric exposed connection hazards

Causes involve worn or cracked mounting brackets after years of use, missing or stripped retention screws, and impact damage to supports.

This OEM part is compatible with Hotpoint and RCA electric range brands as well.

The Range Burner is an OEM replacement part for GE ranges. It is responsible for safely producing gas flames to heat the range surface. Whether baking, broiling, or simmering, the range burner must provide precise flame control and heat distribution.

Causes of a bad range burner can include cracked or rusted burner heads that improperly direct the flame, clogged or restricted gas ports that disrupt fuel flow or wear to ignition components that affect lighting.

Symptoms of a bad range burner include:

• Irregular or uneven heating of the range surface
• Difficulty controlling burner flame heights
• Burners that will not light or stay lit
• Singed, scorched, or burnt foods
• Gas leaks around burners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Surface Burner is an OEM part for GE gas ranges. As the critical surface heat is delivered through, it is exposed to extreme temperature variations during cooking.

Symptoms of a bad surface burner include: 

• Deteriorated or cracked porcelain-enamel exterior
• Warped or misshapen burner base that no longer sits flat
• Cookware that rocks or is unstable when placed on the burner 

Causes can be normal wear over many heating and cooling cycles or damage from the continuous use of larger pots that put undue stress on the burner head.

Replacing with this OEM GE part restores a stable, level cooking surface. It is compatible with Hotpoint, RCA, and Kenmore ranges as well as preventing future repairs from minor issues. Install yours today for reliable stove-top performance.
 

The Clip Igniter is an OEM replacement part for GE ranges.

This GE OEM replacement is also compatible with some Hotpoint, Sears Kenmore, and RCA models. 

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and controlling the burner flame.

Symptoms of a faulty burner cap include:

• Uneven or weak flame
• Gas leakage around the burner heads
• Difficulty in adjusting the flame intensity

A bad outer cap can occur due to wear and tear, accidental damage, or exposure to high temperatures. If you notice signs of damage, such as cracks, discoloration, or a loose fit, it may be time to replace the outer cap. Replacing this part can help improve burner performance and flame if the old cap is damaged or corroded. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The burner cap is an OEM component specifically designed for GE wall ovens and ranges. The inner burner cap is responsible for evenly distributing heat across the burner surface while protecting the burner element underneath. 

Causes of a bad burner cap can include damage from scratches or cracks that occur over time from regular use and cleaning. The burner cap material may also deteriorate due to exposure to high heat.

Symptoms of a bad burner cap include:

• Uneven or inconsistent burner performance  
• Hot spots on the burner surface
• Damage or cracking visible on the cap
• Difficulty cleaning residue or spills from the burner area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the burner head and serves to distribute the flame evenly across the surface, enhancing cooking efficiency and consistency.

Symptoms of a faulty burner cap assembly include:

• Uneven flame distribution or a yellow or orange flame.
• Difficulty igniting the burner.
• Excessive soot or unburned gas smell, indicating incomplete combustion.

The common causes of issues with the burner cap assembly include misalignment, food spillage clogging the ports, or wear and tear from regular use. These can affect the flow of gas and air, leading to inefficient combustion and poor cooking performance.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap Assembly is an OEM part for GE cooktops and ranges. It is designed to cover the burner head, ensuring even flame distribution for efficient and effective cooking. The cap also protects the burner head from spills and debris, which can interfere with burner performance and cause clogs.

You should replace the burner cap assembly if it becomes damaged or worn out. Causes of a bad burner cap assembly can include regular exposure to high heat, food residue buildup, or accidental impacts that cause cracks or warping. A compromised burner cap can lead to uneven flames and inefficient cooking.

Symptoms of a bad burner cap assembly include:

• Uneven or yellow flames
• Difficulty igniting the burner
• Visible cracks, chips, or warping in the burner cap
• Poor cooking performance with hotspots on cookware

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This vortex-style burner cap sits on top of a gas cooktop burner to shape the flame and protect the burner head for more consistent heat. Replaces a damaged or missing cap to restore proper burner performance. What it does:

• Directs and stabilizes the gas flame for even cooking across the burner
• Protects the underlying burner head from spills, debris, and corrosion
• Helps prevent uneven flames, weak ignition, or flame lifting/blowing
• Matches the geometry of the burner for correct flame pattern and efficiency

• One vortex-style burner cap

• Turn off the cooktop gas supply and ensure the burner is cool before handling
• Remove any debris from the burner head and seat the cap squarely on the burner base
• No special tools required for most surface burner caps; hand-seat and test flame

This vortex burner cap covers and protects the gas burner head while helping shape the burner's flame for efficient cooking. It's a direct-replacement cap used on vortex-style gas burners to restore proper flame pattern and surface appearance. What it does:

• Protects the burner head from spills, grime and corrosion
• Helps focus and shape the flame for more even heating on vortex burners
• Can resolve uneven or irregular flame patterns and poor ignition at the burner
• Restores a clean, finished look to the cooktop surface

• Turn off the appliance and gas supply (or unplug) and ensure the cooktop is completely cool before servicing.
• Remove the old cap, clean the burner head of debris, then seat the replacement cap squarely on the burner head.
• No special tools typically required; verify correct orientation and fit before use.

This grate foot cushions and stabilizes the burner grate on your gas range or cooktop. Replacing worn or missing feet helps stop wobbling, reduce rattling, and protect the cooktop surface from scratches and chips.

• Supports and levels the grate at its contact points on the cooktop
• Provides a non-slip buffer to reduce noise and vibration
• Helps prevent scratches and damage to the cooktop surface
• Common signs to replace: missing/brittle feet, grate rocks or wobbles, marks on the surface

• Allow the appliance to cool completely before starting
• Remove the grate; pull off the worn foot and clean the mounting area of residue
• Press the new foot firmly into place; if your model uses an adhesive pad or high-temp adhesive, follow OEM instructions and cure time
• The grate sits level and stable before use

This café grate and foot assembly replaces a damaged or missing cooktop grate section and its leveling foot to restore stable support for cookware and even heat contact. It's a direct-fit replacement designed for specified GE café cooktops. What it does

• Provides a stable, heat-resistant surface for pots and pans during cooking
• Restores proper spacing and alignment of the cooktop grate for even heating
• Prevents cookware wobble and reduces risk of spills caused by a damaged grate or foot
• Helps protect the cooktop surface from direct contact and scratches

• Disconnect power and ensure the cooktop is completely cool before attempting service
• Remove the old grate/foot carefully and position the replacement so it seats firmly in the grate supports
• Do not force parts; confirm the foot threads or snap features align before tightening by hand

This cooktop grate and foot assembly replaces a worn or damaged grate to restore stable support for cookware and even heating across the burner area. It's a direct-fit replacement designed for use on compatible gas cooktops. What it does:

• Restores a stable surface for pots and pans, preventing wobble or tipping
• Replaces cracked, bent, or missing grate support to improve safety
• Helps maintain even heat distribution by keeping cookware level
• Matches OEM fit and mounting locations for simple swap-out

• Disconnect gas supply and turn off cooktop before servicing when applicable; follow your appliance manual.
• Use appropriate tools and avoid forcing parts; alignment should be straightforward for a direct-fit assembly.
• Inspect surrounding enamel and burner components for damage; replace any additional worn parts.