Craftsman Chipper Shredder Parts

Oil dipstick assembly for lawn and garden engines. Installs in the oil fill tube to measure current oil level. Replace if cracked, broken, or missing.

Fuel cap for gas-powered engines and outdoor power equipment. Seals fuel tank to prevent debris, dirt, and air contamination. Replace if cracked or loose.

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

Controls gas emissions from small engines on lawn equipment. Replace if cracked, saturated, or engine fails emissions. Confirm fit with your model number.

Won't start or pull cord snapped? This recoil starter assembly engages the flywheel to start your mower, tiller, or chipper. Moderate DIY repair.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This seal kit is a genuine MTD part, sold individually. This seal kit provides a variety of replacement seals for use in a log splitter.The seal kit in a log splitter might have to be ordered as a complete replacement part if one or more seals show signs of damage. If the seals in a log splitter allow external materials such as dirt, debris, pebbles, and dust to pass into the appliance or if there are frequent oil leaks stemming from the area of one or more seals, this seal kit should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This seal kit is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

V-belt transfers power from engine to auger or drive system. Replace if worn, cracked, or slipping. Verify fit using your model number before ordering.

Idler pulley assembly for lawn mowers. Mounts to the deck to guide and tension drive belts. Replace if cracked, worn, or causing belt misalignment.

Replacement nozzle assembly for chipper shredders and lawn vacuums. Installs at the discharge outlet. Replace if cracked, damaged, or missing.

Impeller blade assembly for chipper shredders. Installs in the shredding chamber to process yard debris. Replace if blades are dull, chipped, or worn.

Rotating impeller assembly for chipper shredders. Processes leaves, yard waste, and limbs. Replace if cracked, damaged, or worn to restore chipping action.

If your snow blower won't self-propel or drive forward, a worn friction wheel assembly is often the cause. This drive system transfers power to the wheels.

This part is a replacement blower chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a detached or broken chute in a variety of blower models. The blower chute is what allows snow to be expelled from the snow blower. The chute may become worn, cracked, or damaged over time, as it is subject to significant wear and tear. If this occurs, it should be replaced as soon as possible to ensure the blower functions properly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this blower chute, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blower chute is suitable for use on several different models of snow blowers manufactured by MTD, Craftsman, Yard Machines, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

Pivot bar bracket for lawn mowers. Mounts to the mower deck to support handle height adjustment mechanism. Replace if bent, cracked, or broken.