Craftsman Chipper Shredder Parts

If your lawn tractor won't stop properly or brakes feel weak, this brake puck creates pressure on the brake disk when you push the pedal. Essential safety part.

Hydraulic pump coupler for log splitters. Connects the drive shaft to the hydraulic pump. Replace if cracked, stripped, or worn to restore proper operation.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

This cutting wheel assembly sits inside the chipper shredder housing to break down yard debris into smaller pieces. Replace when blades become dull, chipped, or the wheel wobbles excessively during operation.

Black debris collection bag for chipper shredders and lawn vacuums. Replace if ripped, torn, or has holes. Installs on discharge chute to collect clippings.

This is a genuine wing nut replacement designed for use in select walk-behind lawn mowers. Although some wing nuts are considered standard hardware on lawn mowers and other equipment, this specific wing nut connects to a bolt and secures the front baffle to the deck of the mower. Over time, this plastic wing nut can crack, fall off, or the threads may become damaged. This will result in the mover assembly being affected and the unit may not be able to be used until the nut has been properly replaced. This genuine replacement part will provide the exact fit for compatible mowers. This genuine OEM wing nut is manufactured to exact standards and comes from MTD. It can be used with hundreds of walk-behind lawn mower models from the brand, as well as those from Cub Cadet, Ryobi, Troy-Bilt, Bolens, Yard Man, Yard Machines, and Huskee. This plastic wing nut is sold individually. The carriage bolt that it connects to will need to be purchased separately if that also needs to be replaced. No tools are required for this installation, as it can simply be hand-tightened into place. Wear gloves for hand protection when performing equipment repairs.

Log splitter won't engage or pump shaft disconnected? This .875 coupling connects the engine shaft to the hydraulic pump for proper power transfer.

Flail blade for chipper shredders. Replaces worn, chipped, or broken cutting teeth. Essential component for shredding and chipping operation.

Hopper collar that connects the hopper assembly to the impeller housing on chipper shredders. Replace if cracked, broken, or missing to protect components.

Replacement nozzle door for chipper shredders. Attaches to discharge opening to protect users from debris and rotating blades. Order if cracked or missing.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

Replacement screen blade for chipper shredders. Controls shred size and protects engine components. Replace if cracked, damaged, or broken from debris impact.

If your log splitter won't engage or makes grinding noises, the flexible coupling may be worn. Connects engine to pump. Moderate DIY repair (1-2 hours).

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.