Craftsman Chipper Shredder Parts

Replacement fastener nut for lawn and garden equipment. Threads onto bolts to secure parts together. Replace if stripped, corroded, or missing.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

This cotter pin is an authentic OEM replacement part sourced directly from the manufacturer for use on many different lawn and garden machines in many different applications. Cotter pins are pins that are made of metal that are bent with or without curves on one side. The u-shaped pin is used to secure bolts in place. After installation, the ends of the pin are twisted to hold it tightly in place. One example of cotter pin use is on lawnmower wheels. After the wheel is placed on the shaft, the cotter pin slides through the hole on the end of the shaft to keep the wheel in place.Over time, cotter pins may become rusted, or the part being held together may need to be replaced. When the cotter pin is removed, a new one should be installed to ensure a tight hold. Use pliers to untwist or straighten the cotter pin for removal. Pull the cotter pin back through the hole using the pliers. To install a new cotter pin, push the pin through the hole and spread the ends in opposite directions once the pin is through the hole.This cotter pin is made of heavy-duty metal and is sold individually. It is designed for use in many different lawn and garden machines manufactured by various companies, including Craftsman, MTD, and Makita.

This replacement part is a pin. This is a genuine replacement part made by MTD. Pins are typically small but important parts of many machines and appliances. They are responsible for holding different parts together to allow for the machine to operate smoothly. A new pin might be needed if the current one is missing or damaged. Pins can easily become lodged into place due to normal wear and tear. This repair should be fairly simple and require only common household tools such as a screwdriver and possibly pliers. Refer to the proper user manual before attempting to replace this part. This part is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

Snap ring fastener for lawn mowers and outdoor power equipment. Secures components on shafts and axles. Replace if worn, broken, or missing.

Fix mower that won't move or has grinding noises with this 14-tooth left-hand spur gear. Essential transmission component for self-propelled models.

Bearing cup works with cone to provide stability and support radial/axial loads in your lawn tractor. Replace if worn or damaged. Verify fit with model number.

Log splitter won't engage or makes grinding noises? This jaw coupling connects drive shafts and absorbs shock loads. Moderately easy DIY repair.

Replacement screen blade for chipper shredders. Installs in the shredding chamber to cut debris. Replace if cracked, bent, or worn for proper chipping.

Flail blade for chipper shredders. Replaces worn, chipped, or broken cutting teeth. Essential component for shredding and chipping operation.

Secures the chute assembly on your grass catcher attachment. Replace if the strap is cracked, broken, or missing to properly hold the chute in place.

This part is a replacement return hose. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached return hose in a variety of outdoor power equipment. The return hose returns any excess fuel from the carburetor back into the fuel pump. Over time, this part can become worn or may be punctured, which can cause fuel leaks. In this case, it should be replaced immediately before the equipment is used again. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this return hose, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this return hose is suitable for use on several different models of chippers, shredders, and log splitters manufactured by MTD, Troy-Bilt, Yard Man, Cub Cadet, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

Protective hub cap for walk-behind lawn mower wheels. Shields the wheel hub from dirt, debris, and moisture. Replace if cracked, broken, or missing.

Hopper collar that connects the hopper assembly to the impeller housing on chipper shredders. Replace if cracked, broken, or missing to protect components.

Rear flap deflector for chipper shredders. Attaches to the backside to protect components from flying debris and mulch. Replace if cracked or missing.