Craftsman Lawn Mower Spring Parts

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

The torsion spring is designed to create tension between various components in lawn and garden equipment engines. This spring may have multiple applications depending on the type of machine. The torsion spring typically connects levers and other things that need pressure to operate properly. They create torque and help support various items in lawn and garden machines. Over time, they can become worn or the springs can stretch or snap. This will require a replacement of the entire spring, since the unit will typically not be able to function without a properly working torsion spring. This genuine OEM replacement spring is manufactured to exact standards by MTD. This part can be found in hundreds of models from MTD, Yard Machines, Cub Cadet, Troy-Bilt, Husky, Bolens, and Yard-Man. Check the parts diagrams and equipment manual for the exact location and application of this torsion spring. This high-quality spring is made of metal and is sold as an individual unit. Always wear gloves when performing repairs on lawn and garden machines. Beware of pinching and crushing injuries when working with springs, which are typically under a lot of pressure.

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

This genuine OEM replacement part is an extension spring for a Craftsman snowblower idler pulley assembly. The idler pulley attaches to a part of the snowblower's housing and is helps to transfer energy throughout the belt drive. This extension spring helps to redistribute some of the back-and-forth motion created in the pulley as the snowblower runs. This keeps the assembly from shifting out of place and potentially slipping. This extension spring is attached at two points and, if pulled in both directions too far, can eventually lose some of its tension. When this happens, the idler assembly can begin to shake and even slip out of place. Replacing the extension spring is an easy job that will only require a socket wrench to remove the idler pulley. A pair of pliers may help to remove the spring from its clips. This part is only compatible with Craftsman snowblowers and is sourced from its original manufacturer. It ships individually and any additional parts needed will have to be purchased separately.

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. This part secures various internal components while allowing for some flexibility in placement. The spring in a lawn mower might have to be replaced if it can no longer secure internal components.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This torsion spring is a genuine Husqvarna part, sold individually. This torsion spring can be used as a replacement part in a lawn mower. The purpose of the torsion spring in a lawn mower is to store mechanical energy through the steady maintenance of spring tension such that it can deliver an equal amount of force in the opposite direction when twisted.The torsion spring could suffer from general wear and tear over long-term use or could be rendered broken after a collision with a hard object. If this occurs, the torsion spring should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This torsion spring is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Poulan Pro, and Craftsman.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

The chainsaw isolator kit is a spring mechanism that is designed to help reduce vibrations in the equipment while it is being used. Reducing vibrations makes the equipment more enjoyable to use and protects it from additional damage that could occur. This assembly can become worn over time, which will lead to increased vibrations and less stable use of the chainsaw. Replacing the isolator with this kit can alleviate the issues and provide a solution for many common issues. This genuine OEM isolator kit is manufactured by Poulan to exact standards so that it provides an exact fit for compatible models of chainsaws. It can be used with hundreds of chainsaws from Poulan, Jonsered, and Husqvarna. Refer to model diagrams for appropriate installation, placement, and part compatibility information. This is an individual part that is sold as a single unit. This isolator assembly includes all the parts needed for a full replacement: one bolt, two springs, and one isolator with a bar that includes two bolts for mounting. No additional parts or hardware will be required to go with this part replacement.

This replacement part is a compression spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Compression springs are very important in many different types of appliances. Springs use forces to allow the engine and other parts to operate smoothly during use.A new compression spring might be needed if the current one is missing or damaged in any way. This can include being bent or cracked. Due to the nature of their use, compression springs can become stripped over time and should be replaced when this happens. It is not unusual for springs to snap under pressure from overuse. It is recommended to refer to the user's manual before replacing this part. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. This compression spring is sold individually and is sourced directly from the manufacturer.