Craftsman Lawn Mower Carburetor

This carburetor is a genuine MTD part. A carburetor is a tube that filters the air and fuel through the valves of the engine. This carburetor works with small engine devices such as snowblowers and lawn mowers. Natural wear and tear from the usage of an engine over a long period of time can cause the individual components within the engine to malfunction or fall into disrepair. The longer that a carburetor is in use without replacement, the more likely it is to become damaged or weakened, which will require a swift replacement. Signs of weakening infrastructure for which the carburetor might be responsible can include an engine that frequently stalls or will not start, a clotted fuel bowl blocked by dirt and gunk that results in overflowing fuel through the engine's vents, a poor ratio of air and fuel that results in wheezing, hissing, or popping engine noises, or a poor ratio of air and fuel that results in black smoke pouring out of the engine. Any of these symptoms in an engine will require the immediate replacement of the carburetor.

Known as the primer bulb, this replacement part makes it easy for the engine to start. Responsible for circulating fuel through the carburetor, the purge bulb removes air out of the lines and allows the carb to have a new fuel charge before a start. The bulb may harden and crack over time, so it needs to be replaced to prevent an air leak. This is a genuine OEM part that works on different models of gas chainsaws from AYP, Craftsman, Poulan, and Husqvarna. This component is sold individually and comes with two screws.

This high quality choke lever is used on string trimmers and edgers from multiple manufacturers. The plastic choke lever actuates the choke valve which creates a limit to the amount of air that can enter the engine when the equipment is cold started. If the choke lever has been damaged or is broken, it may create problems with starting the tool. If this is the case, the choke lever will need to be replaced.This is a simple replacement project that requires only a screwdriver and a pair of work gloves. Before starting, make sure the tool is turned off and the spark plug wire has been removed. Place the tool on a flat surface and take out the choke lever. The broken choke lever can be removed using the screwdriver. The new replacement choke lever can be installed before tightening the screws and using the equipment again.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The choke lever is made for use with edgers and string trimmers manufactured by Craftsman, Husqvarna, and Poulan.

A gas powered engine often requires priming before it can run, which means injecting some of the fuel into the engine's carburetor. Here, a careful balance of air and gas will receive a spark that causes combustion. The most common way to prime an engine is to use a primer assembly that is activated by a bulb that is pressed to create suction and draw fuel into a reservoir or carburetor. This replacement fuel bulb is for snowblowers that rely on gas powered engines to run. The fuel bulb is very flexible and made to endure seasonal conditions. It works with Craftsman, Yard Machines, MTD, Troy Bilt, and Bolens snowblowers. This is an OEM replacement part that fits into the cover assembly and which requires only a wrench to replace and install. It is sold individually, and other components of the priming assembly may be needed.

This carburetor is designed to mix gas and oil together before moving the mixture into a chainsaw's engine. It is a single-cylinder model with an auto-choke system and requires regular maintenance to stay in good shape. Changing the oil, replacing the air filter, and adding a fuel stabilizer will help keep the engine performing at its best. If the carburetor isn't working properly, this may be due to blockages of debris, dirt, and fuel. If the fuel tank is full but the engine refuses to start, it's a good idea to test the carburetor for problems. Take out the air filter and then pour a small amount of fuel into the carburetor itself. Yank on the starter rope and see if the motor starts. It should die shortly after. If this occurs, the carburetor may have a problem and require replacement. This is an individual part that is compatible with Poulan, Craftsman, and Husqvarna chainsaws. The carburetor is a genuine OEM product that is provided directly from the manufacturer. It comes with a rubber O-ring and a gasket. A screwdriver will also be required to make a replacement.

The primer bulb is a small plastic piece that will draw fuel from the fuel reservoir and into the carburetor when it is pressed down. This ensures that the fuel can get into the carburetor so that combustion can happen in the engine. If the primer bulb is broken or damaged on the engine, it will mean that the carburetor will not be getting the fuel it needs to get the engine to start. In some cases, the engine might not start at all. Other times, it might take a while to get the engine to start. These could indicate that it is time to replace the bulb. This is an OEM replacement part that is sold individually. It will work with lawnmowers and other types of small engines. The bulb is compatible with a range of different popular brands including Toro, Kawasaki, Cub Cadet, MTD, and Craftsman.

This is a genuine replacement carburetor rebuild kit designed for use with select snowblower engines. The carburetor is responsible for mixing the air and fuel that flows into the engine to initiate combustion and start the engine. It has many moving parts and gaskets, and is exposed to high heat and vibrations during use, which can lead to damage and wear over time. A damaged carburetor can cause the engine to die or fail to start. If the carburetor fails, it is often cheaper to rebuild it than to replace the unit or the entire machine. When replacing the components of the carburetor, each part should be done one at a time and the areas around the parts should be cleaned before installing new pieces. Be sure to work in a well ventilated area and allow the engine to cool completely before performing any repairs.This OEM carburetor rebuild kit is manufactured by MTD and designed for use in certain snowblowers from the brand. The kit is also compatible with select engines from Yard Machines, Yard Man, and Troy-Bilt. It includes all of the gaskets, pins, and other components that are needed to do a major carburetor overhaul. It is sold as an individual set.

This carburetor repair kit is made to be used with several types of lawn and garden equipment with small engines. It has all the replacement parts needed to get a generator or snowblower running again if there is a problem with the carburetor. The carburetor is a component inside the lawn equipment that controls the mixture of air and fuel that ignites within a cylinder to cause the engine to run.If the lawn and garden equipment refuses to start up even with a full tank of fuel, this is one of the primary signs that the carburetor has gone bad and will need repairs or replacement. Remove the air filter and pour a small amount of fuel into the carburetor to test where the component is working the way it should be. If the engine turns on but then dies after a short period of time, there is likely an issue with the carburetor. It will need to be rebuilt or replaced.This is a genuine OEM replacement carburetor repair kit directly sourced from the manufacturer. It is compatible with snowblowers and generators manufactured by Craftsman, Tecumseh, Cub Cadet, Toro, and Husqvarna. Each repair kit is sold individually and may require basic tools for installation.

This is a throttle link made to be used by many types of lawn and garden equipment. It is a metal part that connects the carburetor to the throttle controls. If the throttle link is damaged or broken, it will not be possible to change the speed of the tool's engine. In some cases, if the throttle link is malfunctioning or broken, the equipment may not run at all.The throttle link is made of durable materials but it can be weakened by continued use due to stress and vibrations. This can cause the link to break down and stop working. If this occurs, it will need to be replaced. A screwdriver or an Allen wrench will be required to handle the replacement process. The throttle link will need to be removed from the throttle body so the replacement part can be installed.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle link is created for use with snowblowers, lawnmowers, tillers, pressure washers, and generators made by Briggs & Stratton, Tecumseh, Cub Cadet, Craftsman, MTD, Simplicity, and Toro.