Need Help?
Call or text
This is an oil filter designed to fit a variety of small, gasoline-powered motors used primarily on lawn equipment. This genuine OEM replacement filter removes contaminants that otherwise would wear down the internal working parts of the engine. While the filter works very well, it should be replaced annually as a part of regular maintenance. Depending on use, the filter may need to be replaced more often. When replacing the oil filter, the crankcase oil must be drained and safely discarded as well. To remove oil from the gasoline engine, start the engine and let it run for a couple of minutes. This circulates the oil and heats the internal engine parts so oil is better able to drain. Next, remove the drain plug located on the bottom of the oil pan and collect the oil. Remember to dispose of the oil safely where it cannot contaminate streams or aquifers. Once the oil has been removed, remove the old filter and discard it properly. The new filter should only be hand-tightened in place as using a wrench may cause the filter gasket to seal to the engine block. This filter will fit Yard Machine mower engines and MTD equipment.
Installing a brand-new air filter keeps the engine in top running condition. When the machine is in operation, the vacuumed air goes through the air filter. Any dirt or dust is left in the filter media. Over time, the filter will become dirty and can no longer provide the same filtering efficiency as before. If left ignored, the tiny particles could clog the engine and the carburetor. You may experience misfires and no engine start-up. An air filter replacement is cheap and easy to do. Simply remove the air cleaner cover and take out the dirty filter. Insert the new filter into the housing. This replacement will take less than 5 minutes. A screwdriver will be needed. The MTD 951-10298 Air Cleaner Kit is a genuine air filter from MTD. Each kit comes with one paper filter and one foam filter. The foam filter can be cleaned with water and detergent. The paper filter, however, needs replacement at least once a year. This air filter kit is compatible with Cub Cadet, PowerMore, and Troy-Bilt. It can also work with other garden equipment like wheel string trimmers, chipper-shredder vacuums, and log splitters.
This replacement part air cleaner is an OEM part for use in small engines used in outdoor equipment, such as tillers and dethatchers. The air cleaner is responsible for ensuring that clean air is brought into the engine to provide optimal performance. It is a good idea to inspect the air cleaner assembly regularly to ensure that there is no damage or cracks that could allow dirt and debris to get into the engine. If there are any issues, get a replacement before operating the engine again. This will ensure that there is no additional dirt getting into the engine. The genuine OEM air cleaner is a quality item that comes from the manufacturer. It is sold individually. It can work with tillers and other machines from top brands like MTD, Craftsman, and Yard Machines.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
Usually ships within 4 - 14 days
An air filter blocks tiny particles from entering and harming the engine. Over time, it will accumulate dirt and dust. If it is too worn-down, it will no longer be an effective barrier. Small debris may make its way into the engine and cause clogging. It can impede proper airflow. Replacing an air filter is a relatively quick and straightforward maintenance project. Let the device cool first. Then, loosen or remove the air filter cover. Take out the failed filter and install the replacement. Make sure to align it to the housing. Return the air filter cover to its original position. This part will fit several trimmer models from brands like Husqvarna, Poulan, and Craftsman. It has the same shape and cut as the trimmer’s original filter. This replacement does not come with the airbox cover. One genuine Husqvarna airbox filter per order is included, sold individually.
This is a sponge filter that is used in several types of lawn and garden equipment. It helps remove dirt, dust, and other debris before it can reach the engine. If the sponge filter is dirty, damaged, or otherwise not working correctly, debris can end up clogging the carburetor, which will weaken performance or prevent it from starting completely. If the dust and dirt reach the engine, serious engine damage can occur.Inspecting the sponge filter on a regular basis is important to ensure it's working well. It also needs to be replaced at least annually, and possibly more often depending on wear and tear. Replacing the air filter is simple. Take off the lid on the filter and then remove it from the machine. Replace it with the new sponge filter and replace the lid.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The sponge filter is compatible with lawnmowers, lawn tractors, and wood chippers manufactured by Craftsman, Huskee, Cub Cadet, MTD, and Yard Machines.
Mowers are manufactured to last for about 500 hours of running, which breaks down to about 19-20 years for the typical non-commercial user. Commercial mowers, which see a great deal more use, are designed to last for 1000 hours of service, which is about 10 years. To extend the life of a lawn mower to its full potential, there are certain simple preventative routines a user can follow, including annual oil and filter changes. One important routine maintenance ritual for mowers that is often overlooked is changing the air filter, something that should be done at least annually. When the mower chugs, cycles, or simply will not start, the first thing to check is the air filter. When replacing the filter, make sure to use a genuine OEM certified replacement part like this one, which is manufactured according to the specification of the original factory filter. This filter is compatible with Bolens, Yard-Man, Troy-Bilt, Yard Machines, and MTD.
This air cleaner housing is a genuine MTD part, sold individually. This air cleaner housing can be used as a replacement part for lawn mowers and leaf blowers. The air cleaner housing provides a casing for the air cleaner so that it can shield the internal engine from dirt, debris, and pebbles. Check the air cleaner housing regularly to ensure that it is intact and no debris is getting into the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air cleaner housing is compatible with the following brands: MTD, Huskee, and Yard-Man.
This air filter is manufactured by Tecumseh and is an OEM replacement part for select compatible engines on lawn and garden equipment. The air filter system in an engine is designed to help ensure maximum airflow and remove dirt and debris from the air as it is entering the carburetor and the engine. This filter is made of durable plastic and composite paper materials and includes metal screening to help catch more debris and ensure the filter holds its shape. The air filter will collect particles of dirt and debris, and over time it can become clogged from regular use. Air filters should be replaced regularly as a part of routine maintenance, and this replacement part will do the job for models that take the filter. Always disconnect the spark plug when performing maintenance. Replace air filters annually or as needed and choose genuine OEM parts like this filter for the best results. This OEM filter can be used with several different engines made by Tecumseh, including 7, 8, and 10 HP models. This part may be used on generators, wood chippers, or other small engines from Briggs & Stratton, Craftsman, Tecumseh, MTD, and Simplicity.