Craftsman Log Splitter Engine

Replaces a worn or damaged exhaust valve adjuster in your lawn equipment engine. Durable metal component that controls valve movement timing.

Cylinder head assembly for small engines used in snow throwers and log splitters. Replaces cracked, warped, or damaged cylinder heads that compromise engine structure and seal integrity.

Piston ring set for small engines. Installs between cylinder wall and piston to maintain gas compression. Replace if rings are worn or damaged.

This camshaft assembly is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A camshaft assembly is a piece of hardware important to engines. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a tiller, a chipper, a shredder, a log splitter, and a snow blower. It is compatible with products by brands such as MTD, Cub Cadet, Yard Machines, and Troy-Bilt.The camshaft assembly part is very important when it comes to the mechanical operation of an engine. It rotates in conjunction with the crankshaft of the machine. It performs an important service that involves combining air and fuel as they enter cylinders and the gasses released from them.The replacement or repair process of the camshaft assembly should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This camshaft assembly is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A camshaft assembly is a very important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as snowblowers, snow throwers, and log splitters. It is compatible with products by brands such as Yard Machines, Troy-Bilt, MTD, and Cub Cadet.The camshaft assembly is a crucial part that rotates in conjunction with the crankshaft of a machine. It performs an important service that involves combining air and fuel as they enter cylinders and the gasses released from them.The replacement or repair process of the camshaft assembly should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

This part is a crankcase cover. The crankcase itself is what shields the crankshaft from any dirt or debris that would damage the engine. The crankcase is a pressurization chamber for the fuel-air mixture. This part is a cover for the crankcase. It's important that this shield is intact because any dirt or debris that gets into the engine can cause the engine to fail.A new crankcase cover may be needed if the crankcase cover is dented, broken, or damaged in any way. A visual inspection is sufficient. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This crankcase cover is compatible with engines, lawnmowers, tillers, log splitters, chippers, shredders, and trimmers manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

This cylinder head is made for use in many types of lawn and garden equipment. The cylinder head is located on top of the engine in the machinery. It is tasked with making sure the combustion chamber is sealed shut. The gap between the engine and the cylinder head will be filled using a head gasket. Another responsibility of the cylinder head is ensuring the cylinder is constantly lubricated. If the cylinder head isn't working, it may cause low oil levels, lowered engine performance, and exhaust smoke.To inspect the cylinder head, the grass shield and screen should first be removed. Remove the engine cover by taking out all of the bolts that secure it. Remove the engine shroud and the bolts that connect the head to the pump bracket. The cylinder head will be located under the valve cover. Remove it and install the replacement part before using the tool.This cylinder head is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. The cylinder head is created to be compatible with lawnmowers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.