Craftsman Log Splitter Carburetor

This is a genuine replacement carburetor assembly designed for use with select outdoor lawn and garden engines. The carburetor is responsible for creating the fuel and air mixture that goes into the engine to start combustion. If the fuel and air mixture is not correct, the engine can misfire or not start at all. There are several gaskets and moving parts that can malfunction or cause issue. Over time, the carburetor can even become worn and damaged from buildup and regular use. A replacement or rebuild is easier than getting a new machine.When replacing the carburetor assembly, it is important to allow the engine to cool completely and wear gloves. Work in a well-ventilated area and be sure to disconnect the power supply before starting any engine work. Remove the old carburetor assembly and replace it with the new unit, and then reassemble the engine.This OEM carburetor assembly is manufactured by MTD and designed to be used with several models of engines from Troy-Bilt, MTD, Craftsman, Bolens, RYOBI, Yard Man, Yard Machines, and select other models. It is sold as a single assembly and doesn't include any other hardware or accessories.

This part can be used to replace a deteriorating or broken throttle linkage spring, which helps to regulate the speed of outdoor power equipment.As throttle linkage springs age they begin to wear out or can easily break. This can cause serious problems with regulating the speed of outdoor power equipment such as lawn mowers and trimmers. A broken or weak throttle linkage spring will stop the throttle on the equipment from returning to the off or resting position when the throttle is released. This can be dangerous. This throttle linkage spring is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement throttle linkage spring fits various different MTD, Cub Cadet, Craftsman, and Troy-Bilt models of lawn mowers, log splitters, and trimmers. Please note that this part is sold individually.

This plastic body fuel shutoff lever is a genuine OEM replacement part for many different engines on lawn and garden equipment. It is part of the fuel shutoff valve assembly. This valve controls the gas flow from the fuel tank to the engine. The shutoff lever is used to open or close the valve. This lever is a plastic part that may break or crack over time. Exposure to rain and snow and excessive use may lead to damage. When this happens, the shutoff lever should be replaced to prevent fuel from leaking from the fuel tank.Repairs to the fuel tank should be made outside where there is adequate ventilation. Remove all fuel from the fuel tank and take the spark plug out before working on the shut off lever. Remove the fuel tank from the machine and turn it upside down to get to the fuel shutoff lever. Remove the lever from the shutoff valve. Install the new shut off lever. Reinstall the fuel tank and fill it with fuel.This fuel shutoff lever is sold individually. It is made for MTD and Troy-Bilt log splitters and other small engines.

A primer bulb works to lubricate the engine with oil by pressing in the rounded tip of the primer bulb. It measures an inch in diameter and an inch tall. Over time these parts can wear out from sun exposure, contact with chemicals, or dry rot. The gasket may wear out before the primer bulb, so it is important to check this part regularly to discover any damage. Installing the new primer bulb kit should be easy and only take a few minutes. Only a screwdriver set and pliers are needed to complete this repair. This primer bulb kit works in conjunction with small engines, lawnmowers, log splitters, and pressure washers made by brands Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, MTD, Tecumseh, and Toro. It is a genuine OEM part and is sold individually.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This is a replacement carburetor for use with various types of small engines. The role of the carburetor in the engine should never be overlooked. This part is responsible for providing the correct air and fuel mixture to the engine, so it can start and continue to run properly. In time, there may be issues with the carburetor. Parts of the carb could fail or become corroded and need to be replaced. To get a better idea of whether the carburetor is the problem, owners can remove the oil filter and add a teaspoon of fuel directly to it. Then, they will start the engine. If the engine starts, but stalls after a few seconds, it could be the carburetor. It should be replaced soon to ensure the engine continues to start and perform well. This is a genuine OEM replacement carburetor that is sold individually. It does come with the needed gaskets. The carburetor can be used on various models of log splitter, mowers, and other small engines. Compatible brands include Tecumseh, Craftsman, and MTD.

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.

This is a main nozzle tube replacement for use with a range of different types of outdoor equipment and small engines. Another name for the main nozzle tube is the fuel jet. The fuel will turn into a vapor and then travel through the main nozzle in a vacuum process. This draws the air into the Venturi pipe. The main nozzle tube is made from plastic, and it can eventually start to break down and wear away. When this happens, it will no longer be efficient. Owners might find that the engine is not running smoothly, or that it is difficult to start the engine. Replacing this element of the system could be what is needed. This is a genuine OEM main nozzle tube replacement. It is sold individually and works for various models of lawn mower, snowblower, tiller, pressure washer, generator, log splitter, wood chipper, and other small engines. Compatible brands include MTD, Toro, Cub Cadet, Lawn-Boy, Craftsman, and Briggs & Stratton. Owners should always ensure they are getting the correct replacement for their make and model.