Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This replacement part includes one fuel cap assembly and is compatible with specific models of gas-powered blowers and trimmers. This part is made of high-quality plastic. It consists of a black cap that is approximately 2 inches in diameter with a retainer connection to keep the cap from falling on the ground. The cap is meant to cover the fuel tank's fill nozzle. Replacing a lost, leaky, or damaged cap won't require any tools. This original OEM part is designed to deliver a perfect fit for compatible equipment. It is compatible with outdoor power equipment from Craftsman, Husqvarna, Poulan, and Weed Eater. This replacement part is sold individually.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
This part is discontinued by the manufacturer and is no longer available for purchase.
This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.
This genuine Husqvarna filter holder can be used as a replacement part for string trimmers. The function of a filter holder, otherwise known as an air box, is to take in external air flow and channel it through a network of valves into the cylinder of the engine, which is where the fuel combusts and ignites the spark plugs.A filter holder might have to be replaced if it shows symptoms of disrepair or malfunction that prevent it from transferring air flow into the cylinder. These symptoms of damage could include an engine that won't start or misfires frequently, reduced fuel economy, or block smoke pouring out of the exhaust. Though these symptoms are not necessarily directly attributable to the filter holder, if a visual inspection shows that a damaged filter holder is indeed responsible, it should be replaced immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This filter holder is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.
This fuel tank is a genuine Husqvarna replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The fuel tank contains the fuel that is responsible for keeping the engine running.A lawn trimmer fuel tank might have to be replaced if there is damage to the tank that leads to leakages; this damage could come in the form of cracks, tears, rips, piercings, and erosion to the plastic material. If the fuel tank is damaged, it must be removed and replaced immediately, as the lawn trimmer cannot function without a full tank of fuel. To remove and replace a fuel tank for a lawn trimmer, one will need a flathead screwdriver and clamps; a repair can be performed in about 20 minutes following basic steps. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel tank is compatible with the following brands: Husqvarna and Craftsman. This part sold individually.
This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.
This baffle plate is a genuine Husqvarna part, sold individually. This baffle plate can be used as a replacement part in a string trimmer of a pole pruner. The purpose of the baffle plate in a string trimmer or a pole pruner is to control and regulate the amount of heat that is retained within the appliance.If the baffle plate shows signs of damage or reduced efficacy, the baffle plate should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance by its operator.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This baffle plate is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.
This is a starter pulley used in trimmers and pruners. The starter pulley protects and encloses the starter rope. It includes a metal screw that is used to keep the rope in place while inside of the pulley. If the pulley is damaged, becomes cracked, or is lost, it can cause a malfunction and the rope may jam inside of the tool. When this occurs, the part will need to be replaced.Removed the starter to inspect the pulley for damage. The pulley should be replaced if needed. To replace the starter pulley, pull out the starter rope and use a screwdriver to secure the pulley and recoil spring. Remove the rope and screwdriver before releasing tension on the spring by rotating it. Next, take out the original pulley and replace all the other components.This starter pulley is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is used with pole pruners and string trimmers manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater.
The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.