Need Help?
Call or text
Show parts
This OEMspark arrestor kit includes all the parts needed to replace the spark arrestor. The spark arrestor is a device that prevents the emission of hot exhaust, hot particles, and hot debris (that could be flammable) from being expelled from an internal combustion engine.The spark arrestor contains a screen that may become clogged through normal use. Common signs that the spark arrestor screen may be clogged are a lack of power during use, poor acceleration, and engine misfires. Carbon may build up on the screen, which causes these problems. The operator may be tempted to try cleaning the screen, but it is not recommended; the failed part needs to be replaced.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on other Husqvarna produced hedge trimmers, weed whackers, lawnmowers, chainsaws, snow throwers, power cutters, and leaf blowers manufactured by Craftsman, Poulan, Poulan Pro, Weedeater, AYP, Jonsered, McCulloch, and RedMax.
Usually ships within 4 - 14 days
This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.
This replacement screw is intended for use on a variety of lawn and garden tools to attach components. It is a genuine OEM part sourced directly from the manufacturer. It is used to attached the trimmer head to the shaft in weed eaters and in many other applications on other tools. Overuse and normal wear and tear can cause damage to the screw. The screw can also become stripped when it is over-tightened or bent from contact with heavy debris. The screw will need to be replaced if this happens. Routinely inspecting equipment will help reveal broken or missing screws that need to be replaced or tightened. This screw is a star-slotted screw that requires a Torx screwdriver to remove it from the machinery. If the screw is in a tight-fitting area, an extension socket with a Torx bit can be used to remove the screw and to install a new one. When replacing a screw, check the remaining screws for damage and tighten any that are loose. This screw is a silver-colored, heavy-duty metal screw sold individually. It is compatible with trimmers, leaf blowers, leaf vacuums, hedge trimmers, and other equipment manufactured by Craftsman, Weed Eater, Poulan, and Husqvarna.
This genuine replacement part is a carburetor assembly, also known as a carburetor kit. This part is for use with a line trimmer. A carburetor is essential for use in an internal combustion engine, as it works to mix the fuel and the air before being sent to the engine. The carburetor may wear out or become damaged due to extended use, requiring replacement. If the line trimmer experiences difficulty starting, rough idle, high idle, false-start, no-start, or excessive fuel consumption, a faulty carburetor is possibly the cause of the issue. This OEM replacement part is made of high quality metal, and is sourced directly from the manufacturer. This part is sold individually.Owners should follow these important safety precautions when working with this part: Shut off the engine of the line trimmer. Allow the engine to become cool before installing this part. For installation instructions, please refer to the original product manual. This part is compatible with a variety of AYP, Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, and Weed Eater line trimmers.Please note: original part number 530071443 is now obsolete, and the manufacturer has replaced the original part number with this part.
An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.
These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This genuine Husqvarna rope kit can be used as a replacement part for the small engine of string trimmers. A rope kit works alongside the starter handle to facilitate the recoil starting mechanism in a string trimmer. This is the mechanism by which the string trimmer is turned on; the rope is looped around a pulley and the rope is pulled and coiled off of the pulley in order to power the engine.A rope might have to be replaced by this rope kit if it shows visible signs of wear and tear that affects its ability to start the engine. If a rope looks like it is fraying or has worn out over time from exposure or general long-term usage, the rope should be removed and replaced with this genuine OEM replacement part before using the string trimmer again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This rope kit is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.
This part is discontinued by the manufacturer and is no longer available for purchase.
A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.
This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.
This replacement part is a crankshaft seal. This is a genuine replacement part made by Husqvarna. This part is commonly found in line trimmers or edgers. This seal is found towards the front of the engine and is responsible for sealing the area so that there are no leaks during use. A new crankshaft seal might be needed if the user notices there are leaks coming from the engine. This can be due to the rubber on the seal being stripped down and no longer able to function properly. Wear work gloves when completing this repair, as this part is typically close to the engine and could cause injury. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer. The purpose of the retainer in a string trimmer is to affix the fuel tank to the fuel line so that the fuel for the appliance can be directed through the proper passageway and be delivered into the tank.The retainer in a string trimmer might need to be replaced if it is damaged to the point that it loosens from its spot or cannot maintain its placement. If this occurs, the fuel might not be able to be effectively delivered to the fuel tank, in which case the appliance might not function as usual. If the retainer is damaged or compromised, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Weed Eater, Craftsman, and Poulan.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
This replacement part is a throttle cable assembly. This is a genuine replacement part made by Husqvarna. This cable is used to connect the throttle to the user area so that the operator is able to control certain settings during use. A new throttle cable assembly might be needed if the user is unable to control the throttle. The wires in the throttle cable can become stripped or worn down. If this is the case, it is recommended that it be replaced right away. Be sure that the engine is turned off before working with wires and other objects connected to the engine. This throttle cable assembly is also sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.