Parts for Mtd 24A-020C706 / 2012: Csv Bag & Impeller Assembly Parts

This replacement part is a switch cover and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This switch cover is meant to protect the user from parts that can be dangerous. A new switch cover might be needed if the current one is missing or damaged. Though this part is small, it is very important and should be replaced if needed. This should be a simple repair and will only take a few minutes. work gloves are recommended if the previous part is damaged. Be sure the engine is powered down before replacing this part to ensure safety to the user and those in the vicinity. This switch cover is sold as a single part and is sourced directly from the manufacturer to ensure a proper fit in different appliances. This part is a genuine OEM replacement part.

This is a snap mount safety switch that is a part of many types of lawn and garden equipment. The safety switch is made of plastic and has a metal four-pronged plug on the bottom. A button is located on the top. Inside of the base, there are two sets of contacts. One set is used to create a circuit between two blades, while the other set makes the circuit for the other pair of blades. One set is grounded and the other connects to the engine of the tool.Replacing the safety switch is required if it is no longer working or has been damaged. Turn off the tool, allow it to cool, and disconnect the spark plug wire. Remove the engine cover before taking off the fuel tank assembly. The engine blower housing will also need to be removed. Access the snap mount safety switch and take it out of the tool before attaching a new switch.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The snap mount safety switch is designed to be used with wood chippers, leaf blowers, and lawnmowers manufactured by Craftsman, Yard Machines, Cub Cadet, Yard-Man, and MTD.

This replacement part is a wire harness assembly. It is a genuine replacement part made by MTD. This wire harness assembly is used in many different types of machines and aids in connecting different parts so that the appliance runs smoothly and effectively. A new wire harness assembly might be needed if the user notices that the current wires are stripped or detached. This can be because of normal wear and tear and is common after years of use. Be sure to wear work gloves when replacing this part as the wires can be harmful when handled. It's also recommended that the user refer to the proper owner's manual before attempting to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This genuine safety switch cover is designed to be used in select chippers as a durable plastic part that provides protection for the switch when the unit is in use and being stored. The safety switch is responsible for keeping the user safe while the chipper is in operation. if something goes wrong, the safety switch can be engaged, which will shut the unit down immediately. Without the plastic cover, this switch is exposed to potential impacts and other damage. It will be important to replace the safety switch cover as soon as possible to prevent further damage. This durable plastic part is made to exact OEM standards and fits machines from MTD, Troy-Bilt, Cub Cadet, and Yard Machines. It will require a screwdriver to replace, but the screws used to install the part will require a separate purchase. The safety switch cover should be replaced when the unit is off and the power has been disconnected so that no accidents occur. It will also be important to wear gloves and eye protection when working on outdoor equipment like chippers and splitters for safety.

The cotter pin is a fastener that is commonly used in lawn and garden equipment. The cotter pin helps provide a secure, locking fit that is adjustable and easy to remove. The cotter pin is commonly used on axles and rods, but it can have many applications depending on the machine and model. Cotter pins can become worn or break down over time because they are exposed to constant vibrations. It is important to replace damaged or broken cotter pins immediately as a broken part can render the equipment useless in many cases. This cotter pin is designed to exact OEM standards by MTD, and is designed for use in various equipment from MTD, Troy-Bilt, Craftsman, RYOBI, Yard Machines, Hard Man, Poulan, Husky, Bolens, and Cub Cadet. This is a 5/16 cotter pin that features a #34 diameter, and is made of a durable metal. This part is sold individually and those who require more than one will have to order multiple quantities. No other hardware is included. Always wear gloves when working on lawn and garden equipment.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.

This is a self-tapping screw that can be used on a wide variety of lawn and garden equipment in many applications. A self-tapping screw is used to secure metal, wood, plastic, and brick together. When using a self-tapping screw, there's no need to drill a pilot hole since the screw makes its own hole. The only exception is with metal, which will still need a drilled hole before installation. There are many situations when a screw may need to be replaced. Some screws are damaged or broken, while others can become loose and no longer hold materials together. Screw heads can become stripped, which will also mean they need to be replaced. A visual inspection can often give an indication of whether you should replace a self-tapping screw. This is a genuine OEM hex head screw that can be used on various lawn and garden equipment, including wood chippers, lawn mowers, snowblowers, log splitters, tillers, edgers, and leaf blowers. It's compatible with products by MasterCut, Craftsman, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Troy-Bilt, Montgomery Wards, Murray, Huskee, Yard Machines, MTD, and more. This screw is sold individually.

This is a replacement screw for lawn and garden equipment that is typically used on the blades. The flat head of the screw ensures that they will sit flush once they have been installed. These screws, which have hex-socket heads, are often found on the blades of chippers and shredders. If a blade is loose, it could be a problem with the screws that are holding it in place. This could make the machine inefficient and even dangerous to operate. Therefore, if there are screws that are worn down or that are no longer doing their job, it is important to replace them. It is essential to use the appropriate screws for a repair. This is a genuine OEM sourced replacement part that comes from the manufacturer. This helps to ensure quality and compatibility. The screw is sold individually. It is compatible with a range of chippers and shredders from MTD, Troy-Bilt, Cub Cadet, Ryobi, Yard-Man, Yard Machines, and Mastercut.

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This vacuum impeller is a genuine MTD part, sold individually. This vacuum impeller can be used as a replacement part in a lawn mower or a wood chipper. The purpose of a vacuum impeller in a lawn mower or a wood chipper is to spin at a high enough speed to generate air flow so that the vacuum of the appliance can draw in or push out pressurized air, a crucial feature of both a lawn mower and a wood chipper.The vacuum impeller in a lawn mower or a wood chipper might need to be replaced if the vacuum impeller suffers too much damage to serve its typical function. If the vacuum impeller cannot rotate at a high enough speed due to reduced functionality or cannot spin at all due to potential damage to the component, the vacuum impeller should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This vacuum impeller is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Yard Machines.

This is a replacement flail blade that is used with various models of chippers and shredders. The purpose of the flail blade is to rotate so it can shred grass and other types of debris. The blade will attach to the impeller assembly. It will help to break down the material, as long as it is in good condition. The flail blade works hard, and it is sometimes in contact with materials that could cause damage. The blade could become bent or broken. In some cases, it could become corroded and rusty. When the flail blade is in poor condition, it will no longer work as efficiently or effectively as it once did. If they are no longer in good condition, owners will want to replace the flail blades on their machines as soon as they can. This is a genuine OEM replacement flail blade. It is sold individually, but machines may require more than one. Buyers should consider replacing them all at the same time. The blades are used specifically for chippers and shredders. They are compatible with models from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Yard-Man, and MasterCut.

This is a genuine replacement pin clip for select models of chipper-shredder equipment. This pin clip is a specialty part that is responsible for helping to secure the blade bail. If the blade bail cannot be secured, it will be difficult or impossible to operate the machine. This is a safety part that is required for operation and if it is missing or damaged, it needs to be replaced immediately. This pin clip is small and can become worn, corroded, or lost over time. A genuine part like this offers an exact replacement for compatible models. This genuine OEM pin clip is manufactured by MTD and meets exact standards to offer an identical replacement for select chipper/shredder units from the brand, along with those from Troy-Bilt, Yard Machines, Huskee, and Cub Cadet. There are over 150 chippers that will take this part, but it may have different locations depending on the model. Owners should consult the parts diagram for the exact location of this clip prior to replacement. This is sold as an individual item. Additional hardware and parts will require a separate purchase. To replace the pin clip, a screwdriver and pliers will be necessary.

This is a genuine OEM replacement pin commonly found in chippers and shredders. This pin is part of a larger clevis pin and helps secure the larger pin into an engine. Clevis pins are inexpensive metal fasteners that connect parts without having to thread into the body of another part. They have a three-part construction consisting of the clevis, a pin, and a tang. This part is the pin that fasteners the clevis. The most likely reason why this pin would need replacing is if it fell out while the engine was running. Engines produce enough heat to cause parts to expand, and it is possible that a clevis could have expanded and the pin fell out. Should this happen, the clevis will no long fasten, and the pin will need to be replaced. Clevises are found in multiple places throughout an engine, so be sure to follow the user's manual to identify the right part. This pin is compatible with MTD, Huskee, Bolens, and Troy-Bilt clevises and comes sourced from the original manufacturer. This pin does not include a replacement clevis. It ships individually.

This washer is a genuine MTD replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, and lawn mowers. The purpose of a washer is to protect and insulate nuts, bolts, and other types of fasteners, preventing these fasteners from gradually loosening. A washer will have to be replaced in the event that it is lost or misplaced, a common occurrence given its extremely small size and its ability to slide off without calling any attention to its absence. Other reasons to replace a washer could include general wear and tear or visible damage in the form of erosion, bending, or cracking metal as a result of overuse or overexposure. If a washer is subject to any of this kind of damage, it should be replaced immediately to avoid nuts and bolts coming loose and separating the materials that they protect and hold together. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This washer part is compatible with the brands MTD, Yard Machines, Cub Cadet, and Yard Man.

The shoulder screw is used in places where a spacer or bearing surface is needed, since the top half of the screw is unthreaded. These fasteners are often used for guides, pivot points, mounting pins, axles, and even a shaft for bearings and bushings in various MTD engines. With regular use, the screws can wear down or be lost. Always repair the missing hardware promptly with genuine OEM replacements. Disengage the spark plug and wear gloves when performing work on engines for safety. This genuine OEM replacement shoulder screw has been designed to be compatible with machines from MTD, Troy-Bilt, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Craftsman. It can be used for multiple applications and in multiple locations in different models of lawnmowers, tractors, and chippers that use the screw in various applications. Check your parts diagrams for the exact location and use of these screws before ordering. This is sold as an individual unit; order multiple quantities as needed.

This part is a bag assembly that is part of lawnmowers, wood chippers, and shredders. The bag assembly contains the lawn and garden debris. This bag assembly is black in color.A new bag assembly may be needed if the bag is ripped, torn, or if there are holes in it. The bag assembly may become worn due to normal wear and tear over a period of time. If this is the case, it will need to be replaced so that it can properly contain the lawn and garden debris disposed of by the outdoor power equipment that it is attached to.This bag assembly is a genuine MTD part. It is sold individually. This specific bag assembly is compatible with lawnmowers, wood chippers, and shredders that are manufactured by the Troy-Bilt, MTD, Yard Machines, Cub Cadet, and Yard-Man brands.

This part is a replacement discharge chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or faulty discharge chute in a variety of chipper or shredder models.This discharge chute ensures that debris is efficiently expelled from the chipper or shredder. This part is subject to significant wear and tear and therefor may require replacement. Proper tools are required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this discharge chute, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this discharge chute is suitable for use on several different models of chipper/shredders manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.