Cub Cadet Home Maintenance Log Splitter Parts

This air cleaner housing is a genuine MTD part, sold individually. This air cleaner housing can be used as a replacement part for lawn mowers and leaf blowers. The air cleaner housing provides a casing for the air cleaner so that it can shield the internal engine from dirt, debris, and pebbles. Check the air cleaner housing regularly to ensure that it is intact and no debris is getting into the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air cleaner housing is compatible with the following brands: MTD, Huskee, and Yard-Man.

This is a hex head bolt 1/4 - 28 x .625. It is used to secure a device together for smooth and simple operations. With use and over time, the hex head bolt may be damaged or come loose and fall out. When the bolt is missing, the machine could fall apart or otherwise malfunction. Be sure to replace a missing or damaged hex head bolt.Allow the equipment to cool completely before starting the repair process. An Allen key or hex key will be required to loosen and remove any old or damaged bolts. The new bolt can then be inserted and secured tightly. Examine for other missing parts before starting the device.The hex head bolt 1/4 - 28 x .625 is an authentic OEM part. It is sold as an individual unit. It is made of rugged, durable, high-quality materials. The hex head bolt can be used in lawn equipment machines, including various models of tillers. It is compatible with MTD, Yard Machines, Yard-Man, Troy-Bilt, and Cub Cadet brands.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

This authentic OEM replacement part is a fuel line kit for a lawn mower. The fuel line is arguably the first stage in a combustion engine. Before the engine can ever start, fuel first has to come from the tank to the carburetor via the fuel line. The fuel line runs from the inside of a fuel tank and into the carburetor. It attaches to the side of the lawn mower using two small metal clamps. Fuel lines are almost always made of either vinyl or rubber and, because of their location on the outside of the lawn mower, they can easily snag on something and tear. If the fuel line tears, gasoline will begin leaking from the fuel tank and pose a potential fire risk. Fortunately, changing out a fuel line is easy. With a pair of needle-nose pliers, pull the damaged fuel line from the carburetor and out through the fuel tank. Reinsert the new line and clamp it down to the mower. This high-quality part is compatible with MTD, Cub Cadet, Yard Man, Troy-Bilt, Bolens, and Yard Machines lawn mowers. It is sourced from the original manufacturer and includes a hose and two metal clamps.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This genuine MTD shoulder screw is an OEM replacement for use on select MTD machines and outdoor power equipment. The shoulder screw has several applications depending on the exact model of equipment, although it is often used to hold handles in place on push mowers. These screws can become worn or get lost over time, necessitating a replacement. It's important to always use genuine OEM parts when making a replacement on outdoor power equipment. This OEM shoulder screw is manufactured to exact standards by MTD and designed to work with several machines that are manufactured by the brand, along with select models from other outdoor power brands. It is sold as an individual unit, and those who need more than one will have to purchase additional quantities. This part can generally be replaced with minimal effort and won't usually require much disassembly. Gloves should be worn for safety whenever working on outdoor equipment, and it may be a good idea to disconnect the spark plug, as well.

This governor return spring is an essential part designed for use with outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a tiller, a leaf blower, and a wood chipper. It is compatible with products by brands such as Cub Cadet, Yard Machines, MTD, Huskee, and Yard-Man.The purpose of the governor return spring is to apply tension to the throttle, which in turn controls the speed of the engine. Over the life of the machine, many components, such as the governor return spring, undergo normal wear and tear. The most common reason for replacing the governor spring is when it is worn out or broken. Signs and symptoms that it is time to replace the governor return spring include deterioration that is causing the engine to over-speed or run improperly. The replacement or repair process of the governor return spring should be straightforward, though the user should plan on using needle nose pliers for the replacement process. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This governor return spring is made out of metal. This governor return spring is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

A carbon canister air filter is an important piece that helps machines operate in accordance with environmental safety standards. This carbon canister air filter is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, string trimmers, edgers, log splitters, and wood chippers. It is compatible with products by brands such as Craftsman, Cub Cadet, MTD, Huskee, and Yard-Man.The carbon canister air filter part is a crucial device that is found in machines with small engines. The air filter is designed to decrease the amount of air pollution that the machine emits. It is serves the important purpose of increasing the machine's fuel efficiency. The carbon canister air filter traps the vapor the machine releases, but rather than letting it escape the fuel tank, it re-routes it back into the engine.The replacement or repair process of the carbon canister air filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.