Parts for Echo HC-151 (08001001-10999999): Cutters / Gearcase / Tools Parts

This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although the screw is durable, it can become damaged due to impact or another incident. It may also be lost in the process of other repairs or maintenance. It will need to be replaced with an OEM model like this screw for the best results. This 4x16 screw is manufactured by Shindaiwa and compatible with select machines from the brand, as well as those from Little Wonder and Echo. This metal screw is sold as an individual unit and does not include any additional parts or accessories. Replacing the starter cover screw is generally a simple task. Allow the engine to cool and disconnect the power supply. Then, use an Allen wrench to remove the old screw if it isn't already missing. Install the new screw and the job will be done. It is important to wear gloves and use the right size hex key to ensure that the screw doesn't get stripped during installation.

This 6 mm nut is used in many applications on various lawn and garden machines. This nut is used in conjunction with either a bolt or a screw to hold the bolt or screw in place. Nuts are square or hexagonal and threaded. They are placed on the end of the bolt or screw threads and turned to tighten the bolt or screw into place. This nut is made of high tensile metal for use under extreme conditions that are often found in outdoor power equipment engines. During regularly scheduled maintenance of outdoor machinery, nuts should be checked to ensure a tight fit. It is possible for a nut to be worked loose by the machine's vibrations. The bolt or screw may not necessarily fall out immediately. A wrench is usually required to loosen the nut. Once loosened it may come off by hand. Replace the nut and hand-tighten. Do not overtighten as it could strip the threads. This genuine OEM part is an individually sold unit. It is sourced directly from the manufacturer and designed for use in chainsaws, edgers, trimmers, lawnmowers, leaf blowers, small engines, and other outdoor lawn and garden machines manufactured by Echo and Shindaiwa.

A nut is a fastening device used on a wide range of machines including outdoor equipment. Nuts are typically used in conjunction with bolts and washers to help provide security to parts of machines or equipment fastened together.There may be a range of reasons to replace a nut on a machine. In some cases, the nut may be old and corroded, or have rounded edges or damaged threads. Other times, the nut could become lost while making other repairs on the equipment. When replacing the nuts, they must be tightened properly with a wrench or socket. The repair is easy, but the nuts should never be too loose or too tight. It is suggested to always follow the manufacturer's guidelines.Metal nuts are used for machines such as hedge trimmers, brush cutters, blowers, and clippers. Compatible brands include Shindaiwa and Echo. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

The hardened washer is a standard hardware part that can be used with various screws and bolts to create a more secure fit on many lawn and garden equipment engines. The washer is often subject to high pressure and can become worn over time. It is a small part that can also be damaged or lost. In any case, replacing the washer is necessary to ensure a secure functioning of the equipment. This genuine OEM part can deliver the solution that works for compatible equipment. This OEM washer is manufactured by Echo to exact standards and can be used with Echo and Shindaiwa lawn and garden equipment. It works on hundreds of models of trimmers, blowers, and hedge trimmers from these brands. Consult the parts diagram for exact application and replacement procedures depending on the model. The washer is made of premium, durable metal and sold as an individual unit. No screws or other hardware are included and will require a separate purchase if they are required. Always be sure to wear gloves for hand protection and never attempt repairs on an engine until it has had time to cool.

This is a quality blade protector that is used with hedge trimmers to ensure the blade lasts longer. The protector is designed to prevent scratches, wear and tear, and damage from rain, sleet, or snow. This blade protector is especially useful in environments with pets or children to keep them safe. The component is made of durable materials but can be damaged or broken over time.If the blade protector is damaged, broken, or lost, this replacement part can be used to protect the hedge trimmer blade. This is a simple replacement process and requires only a hex key to complete. The first step is to take off the original blade protector if it has not been lost. It can be replaced with a new protector. When the hedge trimmer is being used, the blade protector can be removed or stored. This blade protector is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. This component is made for use with hedge trimmers manufactured by Shindaiwa and Echo.

This Bolt 6 is designed for use with hedge trimmers. Consult the owner manual to determine model compatibility. This bolt helps secure the cutter blade to the hedge trimmer main unit. If it becomes loose, the cutter blade could come off causing serious injury. The bolt should be inspected when the blade is sharpened and during other routine inspections. The nut that locks the bolt in place should also be inspected to ensure it is tight. If the nut is rusted or missing, it should be replaced. If the bolt is rusted, this replacement part can be installed to hold the blade in place.Before replacing or installing a new bolt 6, remove the spark plug from the unit to prevent accidental engine powering. Gloves should be worn when working with the cutter blade. Hold the blade carefully while installing the new bolt 6.This genuine OEM bolt is made out of hardened metal to withstand frequent use and vibrations from the trimmer. It is individually sold and does not include the locking nut. It is sourced directly from the manufacturer and designed to be used with hedge trimmers manufactured by Echo and Shindaiwa.

This is a cutter bolt for use with hedge clippers and trimmer. The bolt is used to ensure the cutter blade is properly secured to the driving unit. Without the bolt functioning properly, it could be dangerous to operate the machine. Owners should make it a point to check the bolt for signs of damage or wear.This bolt could be susceptible to corrosion, which could wear down the cutter bolt over time. It could also be bent if the machine were dropped. There is also the risk of threads wearing down, or the edges on the hex head becoming rounded. If there is any damage to the cutter bolt, it should be replaced as soon as possible. A wrench is needed to remove the old bolt and install the new one.The cutter bolt will work with a range of models from Echo and Shindaiwa. It is a genuine OEM part sourced from the manufacturer, and it is sold individually.

This hedge trimmer bolt is a genuine replacement designed for use on select models of hedge trimmers. The bolt is used for multiple applications depending on the model of the trimmer but is always used to provide a secure hold for various components. The bolt uses a hex/Allen key and has a built-in washer and lock washer to provide added security and stability. This bolt is subject to constant vibrations from the hedge trimmer, which can cause it to become damaged or worn over time. In some cases, the small piece of hardware can get lost in the process of other repairs. In any case, it will be critical to replace the missing bolt(s) immediately to ensure proper operation of the trimmer. This genuine OEM trimmer bolt is manufactured by Echo and fits exact standards for select models of hedge trimmers from Echo and Shindaiwa. It can be used on more than 150 models of machines from the brands. Check the parts diagram to identify the location of these screws on the tool, as they may have different locations and applications. Because this is a common part, it is recommended to keep a few extra bolts on hand in case of an emergency.

This is a gearcase gasket that is used with many types of handheld hedge clippers. It is made of durable composite material. The purpose of the gasket is to ensure a tight seal around the gearcase. If the gasket becomes worn, it can create leaks which will affect the performance of the engine and may even lead to damage to major components of the hedge clippers. If the gearcase is leaking, it's likely that the gasket is to blame. When the gearcase gasket is damaged or broken, it will need to be replaced. A hex key will be required to make the replacement to a new gasket. The process involves removing the bottom cover of the gearcase. The grease can be cleaned out before removing the original damaged gasket. Reapply grease and insert the new replacement part into the hedge trimmers. Replace the screws and tighten them.This gearcase gasket is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as a single component. The gasket is designed to be compatible with hedge trimmers manufactured by Echo and Shindaiwa.

This is a gearcase seal for lawn and garden trimmers, used to create an airtight barrier between components and prevent fluid leaks. Even with normal use, over time this seal may wear out and need to be replaced. Symptoms of a bad seal in a trimmer include leaking fluid, low fluid levels, excessive fluid consumption, excessive noise, lowered performance in general or complete failure of the unit.This job requires a few tools to complete, including a hex wrench and a screwdriver. Be sure to wear gloves when making the replacement. Remove the gearcase cover with the hex wrench. Insert the seal and, if necessary, push it into place with a screwdriver. Replace the cover and re-insert the screws.This seal is an authentic OEM replacement part. It is sold as an individual unit. It is made with durable, high-quality materials. The seal is compatible with Shindaiwa and Echo lawn and garden equipment. It is for use in several models of hedge trimmers and other trimmer machines.

The spur gear on a hedge trimmer is located next to the cutter blades. One is found next to each blade. This is a metal component that is made to ensure the blades move freely and smoothly. The spur gear may need to be replaced if it becomes stripped or breaks. Indications that the part might be broken include grinding noises or blades that don't turn or turn out of sequence.If a visual inspection shows that the spur gear is broken or damaged, a replacement is required. A screwdriver and other basic tools may be required while making the replacement to a new part. The blades will need to be detached from each other to get access to the spur gears. Take off the housing on the trimmer to get access to the gear. After removing the old one, the new part can be installed and the trimmer put back together before use.This spur gear is compatible with hedge trimmers manufactured by Echo and Shindaiwa. One gear is needed for each blade but these come as single gears. It is a genuine OEM replacement part that is directly sourced from the manufacturer.