Echo Hedge Trimmer Parts

Oil seal prevents dust, dirt, and water from contaminating internal parts while retaining lubrication. Replace if leaking or motor runs poorly. Verify fit.

Hex screw that secures the starter cover to the trimmer housing. Replace if damaged, stripped, or missing to properly protect internal engine components.

Replace your edger's cracked or damaged engine flywheel. This momentum-storing component mounts to the crankshaft and may need replacement if broken or worn.

Damper spring for edger and gas leaf blower starter assemblies. Replace if broken, missing, or worn to restore proper pull cord tension and recoil function.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This genuine Echo retaining ring can be used as a replacement part for string trimmers, hedge trimmers, chainsaws, leaf blowers, and leaf vacuums. The function of a retaining ring for a small engine appliance is to fasten and limit the motion of a component by attaching it to a shaft or into a bore. A retaining ring can come loose and fall off, becoming lost. A retaining ring can also suffer damage over time in the form of punctures, piercings, or corrosion to the metal material that can preclude it from continuing to fasten components to shafts and bores. If this is the case, the damaged retaining ring should be immediately removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This retaining ring is compatible with the following brands: Echo, Little Wonder, and Shindaiwa.

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

A throttle return spring is a coil-shaped metal mechanism designed for use with outdoor lawn and garden power equipment such as trimmers, hedge trimmers, tillers, string trimmers, pole pruners, cultivators, pumps, reciprocating saws, regular saws, edgers, leaf blowers and vacuums, and pole saws. It is compatible for use with products manufactured by Echo, Mantis, Little Wonder, and Shindaiwa.The throttle return spring pushes the throttle closed when the user lets off the gas. A weak or failed throttle return spring is dangerous because it will prevent the throttle from easily returning to its resting position. This could pose a serious safety hazard to the person operating the machine and anyone nearby. This throttle return spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Echo. This throttle return spring is made of metal.

This genuine Echlimiter cap can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of a limiter cap for such small engine appliances is to reduce harmful emissions in the effort of environmental protection. A limiter cap can be worn down and lose its essential functionality over time from general long-term usage or exposure to corrosive external materials such as dirt, debris, and pebbles. A limiter cap can be pierced, punctured, or warped to the point that it loses its efficacy in a way that is visible to the naked eye, in which case it should be replaced in order to serve its function of reducing harmful emissions from the appliance. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo and Little Wonder.

This genuine Echo limiter cap can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The function of a limiter cap for such outdoor appliances is to minimize the environmentally detrimental emissions from the exhausts of these appliances.A limiter cap can suffer damage from general long-term use and standard wear and tear. If the limiter cap is damaged to the point where it is visibly eroded, punctured, pierced, ripped, torn, or otherwise rendered ineffective, it should be removed and replaced as soon as possible. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo, Mantis, and Little Wonder.

This collar makes up part of the fuel assembly inside various types of lawn and garden equipment. The part is made of durable metal and attaches directly to the fuel tank. The collar ensures the fuel tank is protected from damage from the tool's metal screws. It also works to secure the fuel tank so the engine will power on. The collar can become damaged or worn through use and may need to be replaced.If the collar is broken, it will no longer provide protection for the fuel tank. It can also remove the tank's secure attachment to the rest of the equipment. When replacing this part, an Allen wrench or a screwdriver may be needed. Unscrew the fasteners that hold the collar onto the fuel tank to remove it from the tool. Reattach the new collar to the equipment's fuel tank.This collar is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual unit. The collar is designed to be compatible with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners manufactured by Echo, Shindaiwa, and Mantis.

This is a genuine breather cover replacement for select outdoor lawn and garden equipment engines. The breather cover, also known as a vent cover, is installed directly onto the vent tube that connects to the carburetor, ensuring that the unit can breathe while it is in use. The vent cover is a sturdy piece, but it is also exposed to a lot of vibrations and could even be affected by impact damage. Replacing it with an original part is going to ensure that your engine can vent correctly. This OEM breather cover is manufactured by Echo. It works with blowers, vacuums, trimmers, edgers, and vent-piped saws from Echo, Little Wonder, and Shindaiwa. The breather cover doesn't require any tools to install. Be sure that gloves are worn whenever doing engine work. Allow the machine to cool completely and work in a well-ventilated area at all times. Make sure that the new vent is installed properly so that the correct engine pressure is maintained and the carburetor can breathe like it should.