Parts for Craftsman 358797170: Cylinder / Crankshaft / Crankcase Parts

This is a genuine OEM replacement muffler kit sourced directly from the manufacturer. It is used on many different models of leaf blowers and outdoor equipment. The muffler attaches to the engine to lower the noise level. Listening to loud noise for a prolonged period can lead to permanent hearing damage. Additionally, many neighborhoods have strict regulations concerning noise. Using machinery with a muffler can prevent being fined. Over time, the muffler may stop working efficiently due to corrosion or physical damage from being dropped or dinged. This muffler kit is designed to eliminate as much noise as possible during use. This is an easy fix that requires very little time.A socket set, hex-head screwdriver, and Torx screwdriver are needed to remove the old muffler kit and install the new one. The blower should be cool to the touch before replacing the muffler. Remove the spark plug to prevent accidental ignition. Remove the old muffler, retaining the hardware for installing the new one. Install the muffler first, followed by the muffler cover. Reinstall the spark plug and start the engine to check the noise level.This muffler kit is made of durable plastic and metal; it is sold as a single kit containing the muffler and muffler cover. Hardware is not included. This muffler kit is compatible with blowers manufactured by Craftsman, Weed Eater, Poulan, Jonsered, and Husqvarna.

Gas-powered yard and garden machines require regular routine maintenance and care. When these machines develop problems, it can be difficult to determine the cause. When the engine on a blower seems to be struggling to operate or runs poorly, it may be a good idea to add a full gasket replacement to the maintenance routine. The gaskets will fit various parts of the engine and other systems and will keep the engine air tight and free of leaks. This replacement gasket set includes a full set of gaskets compatible with leaf blowers and other blowers made by Husqvarna, Poulan, Jonesred and Weed Eater. This is a set of OEM replacement parts that ships as a kit. It will require disassembly of the various engine parts and systems, but is often done with little more than screwdrivers and wrenches.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This is a genuine replacement ignition module for select Husqvarna lawn and garden equipment engines. The ignition module, also known as the armature-magneto, creates high voltage power in pulses, which then passes on to the spark plugs and allows them to create the spark to fire the engine. This part consists of the ignition coil and the spark plug boot, which is made with durable rubber and insulated metal. When the various components fail, the engine may not get the spark that it needs to turn over because the spark plug is not getting the power. A replacement will get the equipment running again. This OEM replacement part is designed for use on gas-powered blowers and string trimmers, including select models from Husqvarna, Poulan, Weed Eater, and Jonsered. The ignition module comes as a complete part and includes the boot assembly and coil, so no additional purchases will be required. Hardware is not included, however, and will need to be bought separately when it is needed. This unit is sold individually. The engine should be cool before doing any repairs and gloves should always be worn to protect the hands during engine repairs and parts replacements.

Here is a replacement piston kit for use with handheld lawn and garden equipment engines. The pistons in an engine are essential to transfer combustion power to the various working parts of the machine. Pistons might need to be replaced if they have suffered any sort of damage or corrosion. There are several parts to the system including the piston, rings, wristpin, and circlips. The damage or wear and tear could occur in any of these different parts. When replacing a piston, it is a good idea to replace all of the parts of the kit, not just the part that is having issues. This authentic OEM piston kit is compatible with string trimmers, leaf blowers, hedge trimmers, pole pruners, and edgers. It is sold individually and is compatible with Husqvarna, Craftsman, Poulan, Poulan Pro, and Weed Eater brands. Owners buying a piston kit need to be sure they are getting the right part for their make and model.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

This replacement part is a crankshaft seal. This is a genuine replacement part made by Husqvarna. This part is commonly found in line trimmers or edgers. This seal is found towards the front of the engine and is responsible for sealing the area so that there are no leaks during use. A new crankshaft seal might be needed if the user notices there are leaks coming from the engine. This can be due to the rubber on the seal being stripped down and no longer able to function properly. Wear work gloves when completing this repair, as this part is typically close to the engine and could cause injury. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.

This crankcase assembly is a genuine Husqvarna part, sold individually. This crankcase assembly can be used as a replacement part in a leaf blower. The purpose of a crankcase assembly in a leaf blower is to house and protect the crankshaft within the engine block of the appliance.The crankcase assembly in a leaf blower might have to be completely replaced if the crankcase assembly can no longer prevent the slow buildup of external materials which can infiltrate the leaf blower and prevent undue damage to the internal components. If the crankcase assembly cannot perform its typical function at some point within the standard lifespan of the leaf blower, the crankcase assembly should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This crankcase assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.