Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
Usually ships within 4 - 14 days
This carburetor adapter seal is a genuine Husqvarna part, sold individually. This carburetor adapter seal can be used as a replacement part for chainsaws. The function of the carburetor adapter seal is to protect the carburetor from taking in external materials such as dirt, debris, and pebbles. The role of the carburetor is to take in air and fuel and mix them together at the proper ratio to ignite the spark plugs and turn on the engine. A carburetor adapter seal might have to be replaced if it can no longer effectively seal off the carburetor from external materials. Damage to the carburetor adapter seal can come in the form of punctures and erosion to the metal material, which can loosen the component and allow debris to enter and damage the internal machinery. If this is the case, this genuine OEM replacement part must be ordered before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This carburetor adapter seal is compatible with the following brands: Husqvarna, Poulan, and Craftsman.
This is a cylinder that is specifically designed for use with snowblowers. The cylinder is a part of the starter assembly and engine. If the cylinder has gone bad or is damaged, it can cause problems with compression. Pull on the starter rope while holding a thumb against the cylinder hole. If no air comes out of the hole, it could be the result of a damaged component, including the cylinder. When this part isn't operating correctly, it can prevent the snowblower from starting at all.If the cylinder has gone bad, it needs to be replaced. The snowblower will need to be disassembled to get access to this component. This will require a basic set of tools and a pair of work gloves. Make sure the snowblower is turned off and the spark plug wire has been disconnected before replacing the part.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder is created to fit snowblowers manufactured by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines.
Mufflers can easily become worn or break off with regular equipment usage. This part can be used to easily replace an existing muffler. Mufflers are designed to quiet the noise made by the engine. As the equipment ages this part can fail, causing the engine to be extremely loud when operated. This muffler is made from high-quality, durable, non-corrosive materials. This muffler is a genuine OEM replacement part that has been sourced directly from the manufacturer. This muffler is compatible with various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
Carburetors mix fuel with air to ensure the engine gets just the right amount of combustion. It works when idling and when in operation, and a chainsaw carburetor requires an adapter. This reduces vibration to the carb and isolates heat to help keep the carburetor cool. This carb adapter kit will connect the carburetor to the cylinder and uses a gasket on either side that can fail and require replacement. Because plastic can be used for a carb adapter, it can crack and lead to failure. This OEM carb adapter kit is meant for Craftsman, Poulan and Husqvarna chainsaws, and will work in many different models. Replacing it will require the use of a wrench set, socket set, pliers, and screwdriver. As noted, gaskets may also be needed, but this part is sold individually and includes only the chainsaw carb adapter.
This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.
This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.