Parts for Briggs & Stratton 380447-0075-E1: Cylinder Head, Valves, Gasket Set - Valve Parts

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

The spark plug helps to start the engine by creating the spark that will cause the fuel to ignite in the engine during combustions. Over time, the spark plugs will become worn down and go bad. Multimeters are typically used to test the spark plugs. However, owners should also regularly look at the spark plugs to search for signs of corrosion that could indicate they are going to go bad. If they are not functioning properly, the engine will not fire and start. They will need to be replaced. This is an OEM replacement part that can be used on a range of small engines and lawn equipment from many brands. Compatible brands include Toro, Briggs & Stratton, Craftsman, Cub Cadet, Simplicity, and Snapper.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

A spark plug boot is an important piece of rubber hardware. The purpose of the spark plug boot is to connect the spark plug to the magneto. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, snow blowers, tillers, pressure washers, leaf blowers, generators, and wood chippers. It is compatible with products by brands such as Briggs & Stratton, Toro, Cub Cadet, Snapper, and Simplicity.The spark plug boot part is important to outdoor equipment with small engines because it safely connects the ignition coil to the spark plug. Naturally over time, and with the wear and tear from use, the rubber material on the spark plug boot may dry out, crack, and fail, and will require replacement. Luckily, the replacement or repair process of the spark plug boot should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This spark plug boot is made out of rubber. This spark plug boot is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.

This part is a replacement valve seal. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective valve seal in several types of outdoor power equipment.This particular valve seal is intended to create a seal for the tappet valve within the engine. The tappet valve helps to open and close the engine's intake or exhaust valve. This part may become worn or broken over time, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this valve seal, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This part can be used with small engine outdoor power equipment that have been manufactured by Midwest Engine. Sold individually.

This part is a replacement exhaust gasket. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. It's intended use is to replace a broken or defective exhaust gasket in several varying models of small engine power equipment.The exhaust gasket ensures that there is an air-tight seal created between connecting pieces within the engine. This helps to stop leaks from occurring. Over time, gaskets easily become worn and brittle and will require replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this exhaust gasket, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This part can be used with small engine power equipment such as generators that have been manufactured by Midwest Engine. Sold individually.

This genuine OEM replacement part is a rocker cover gasket for a wide variety of Briggs & Stratton engines. A rocker cover gasket seals oil into the camshaft. The camshaft (or rocker) is the part of an engine that translates the up and down piston movements into rotational movements to turn the crankshaft. While the engine is running, there is a flurry of motion that requires a lot of oil in the camshaft. The rocker cover helps keep all this oil inside the proper places, but it needs a gasket to help seal everything in place. Engines produce a lot of heat and after prolonged use, a gasket will warp or break. When this happens, oil will begin leaking from the engine. An obvious sign of this is if the engine begins burning bluish grey smoke and seems to be going through oil at a faster-than-normal rate. This part is sourced from the original manufacturer and ships individually.

This is a genuine replacement push rod made for use with several different types of lawn and garden equipment. The push rod is a component that connects to the camshaft. It helps push and keep the exhaust valve open throughout the exhaust stroke. If the push rod is broken or damaged, it needs to be immediately replaced. If it becomes bent, it can create problems with engine performance and even damage other components.The push rod is made of durable metal but can be damaged through ordinary use. A damaged push rod should be replaced immediately. The valve cover will need to be removed before loosening the valve rocker to rotate it away from the other components. Once this is done, the push rod can be removed and the new replacement part installed. Replace all the other parts before using the tool.This push rod is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The push rod is designed for use with wood chippers, generators, snowblowers, and lawnmowers created by Simplicity, Snapper, Cub Cadet, Toro, and Briggs & Stratton.