Parts for Briggs & Stratton 294447-1237-E1: Cylinder, Piston / Rings / Connecting Rod, Engine Gasket Set Parts

This oil seal is used in lawnmowers and other types of outdoor equipment. Oil seals keep the lubricating oil in the equipment from leaking. With use and age, oil seals can weaken, become loose, or damaged. Leaking oil, excessive smoke, and greater oil consumption are all signs that an oil seal needs to be replaced.Replacing an oil seal is simple. Make sure to drain all the oil before starting the repair. Use a genuine OEM replacement part for reliable, long-lasting results. Remove the old seal with a drill, screw, or pliers. Fit the new seal and tap on with a soft-faced hammer. Fill with fresh oil.This oil seal is a 100% authentic OEM replacement part supplied directly from the manufacturer. It is sold individually. The oil seal is compatible with a variety of brand-name machines, including those from Briggs & Stratton, Simplicity, Vanguard, and Toro. It is made from a high-quality, durable plastic material. The oil seal can be used in numerous lawn tractors and engines.

This is a cylinder head gasket. It is a genuine Midwest Engine part. It is a replacement part for lawn mowers and lawn tractors. It may also be used with certain models of wood chippers, snowblowers, and other small engines.The cylinder head gasket is located between the cylinders and the engine block. It prevents substances such as oil and coolant from leaking or mixing improperly. It may become damaged through normal wear and tear. It is dangerous to operate a machine without a properly functioning cylinder head gasket. Some disassembly of the deck and engine is required to make this repair.This cylinder head gasket is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with mowers and tractors manufactured by Briggs and Stratton, Simplicity, Toro, Snapper, and Cub Cadet.

This is a breather assembly that is used as a replacement part in lawn and garden equipment. The breather is a valve for the fuel tank. It allows air into the fuel tank while ensuring fuel and other emissions do not leave the tank. This is an important piece that will prevent leaks and should be replaced if it is damaged or malfunctioning. Be sure to complete any repairs in a well-ventilated area.The breather assembly will work as a replacement for certain engines from Briggs & Stratton. The piece is sold individually. The genuine OEM replacement piece has been sourced from the manufacturer.

This replacement oil drain plug is a genuine OEM part for a lawn tractor or generator engine. The oil drain plug connects to the base of the oil tank and allows the appliance owner to drain used oil and replace it with new, clean oil. The oil drain plug is threaded to screw into the oil tank and prevent it from popping out of place while the appliance is in use. The most likely reason to replace an oil drain plug is if the old plug's threading has become stripped and no longer holds onto the oil tank. Alternatively, the plug is quite small and could easily be misplaced during an oil change. If lost, oil will leak from the engine, causing parts to overheat. Fortunately, replacing a lost or damaged oil drain plug is simple and only requires screwing a new plug into place. This replacement plug is a high-quality part that fits Craftsman and Murray products. It comes sourced from its original manufacturer and ships individually, without any additional hardware.

This oil seal is a genuine Midwest Engine replacement part for outdoor appliances with small engines, such as lawn mowers, snowblowers, and wood-chippers. The function of an oil seal is to protect an appliance from accumulating dirt, debris, and gunk in its inner workings as well as to avoid potential oil leaks.If an engine is subject to oil leaks, it could be because of a damaged or malfunctioning oil seal. Diagnosing an oil leak can be tricky, as there are many aspects of the engine that, if compromised, can lead to leakage. This can be tested by running the engine until the leak occurs and then checking to see if the leak originally stems from the oil seal. If it is ascertained that the leak is indeed a result of a damaged oil seal, this genuine OEM oil seal can serve as a replacement part in the case that damage has occurred to the original. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This oil seal is compatible with the following brands: Briggs and Stratton, Simplicity, and Toro.

This connecting rod is a genuine Midwest Engine part, sold individually. This connecting rod can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, generators, and wood chippers. The purpose of the connecting rod in a small engine outdoor appliance is to affix the piston and the crankpin to one another so that the pump mechanism of the engine can be operated.The connecting rod in a small engine outdoor appliance might have to be replaced within the standard lifespan of the appliance if the connecting rod no longer affixes the two components to one another. The connecting rod could be punctured, scraped, or eroded over general wear and tear from long-term use, in which case the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This connecting rod is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, Snapper, and Simplicity.

This is an intake gasket that is used in lawnmowers and other yard and garden equipment with a small motor. The intake gasket is a component that rests between the intake manifold and carburetor and creates an air-tight seal for the carburetor to ensure it has the best possible performance. It is made from a com material and over time, it can start to break down and will need to be replaced. If the intake gasket isn't working correctly, it can cause decreased power, engine misfires, engine overheating, and leaks. Sometimes the intake gasket can also break and require a replacement. A wrench will be needed to install a new component to get the lawn equipment up and running again. The carburetor will need to be removed from the machine and taken apart to get access to the gaskets so they can be replaced.This intake gasket is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual component. The intake gasket is compatible with lawnmowers, wood chippers, snowblowers, and generators manufactured by Simplicity, MTD, Snapper, Cub Cadet, Toro, and Briggs & Stratton.

This is a replacement dipstick tube seal that is designed specifically for use with select Briggs & Stratton engines on lawn and garden equipment. This seal is designed to provide a seal in the oil dipstick tube to ensure that oil stays in the crankcase and air stays out. It sits in the bottom of the fill tube and also helps hold the tube securely in place. Over time, the seal can become damaged or broken and result in oil leaks. If this happens, the seal should be replaced immediately to ensure proper engine operation. Oil leaks can lead to poor performance or even cause further damage to the engine if left unrepaired. This replacement tube seal can get equipment back in proper working order in no time. This dipstick tube seal is manufactured to specific standards by Briggs & Stratton. It is designed for use with multiple models of engines that are installed on blowers, generators, tractors, and snow blowers from Briggs & Stratton, Murray, and Toro. There are over 150 compatible units that can use this exact part. This durable seal is made of premium composite rubber materials and is sold individually. Be sure to drain the oil before replacing this part to avoid spills.

This part is a replacement valve seal. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective valve seal in several types of outdoor power equipment.This particular valve seal is intended to create a seal for the tappet valve within the engine. The tappet valve helps to open and close the engine's intake or exhaust valve. This part may become worn or broken over time, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this valve seal, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This part can be used with small engine outdoor power equipment that have been manufactured by Midwest Engine. Sold individually.

This exhaust gasket is located to fit between the exhaust system and the engine exhaust. It is used on many types of lawn and garden equipment. When operating correctly, the gasket will prevent exhaust from leaking. It also has sufficient flex to allow parts to expand when heat is present. The main purpose of a gasket is to prevent leaking. When the gasket is failing, it often leads to exhaust leaking from the joint.Many situations can cause an exhaust gasket to fail. The part can lose flexibility, dry out, or experience cracks. If the gasket chafes, it will lose its heat resistance and begin to dry out. When there is excess engine vibration, the gaskets can also tear. If this occurs, checking the engine mounts is important to ensure they are tightened and fully secure. Replacing the gasket involves removing the engine, taking out the old gasket, and putting a new one in its place.This exhaust gasket is a genuine OEM component sourced directly from the manufacturer. It is sold individually and fits lawnmowers, wood chippers, snowblowers, and generators from Briggs & Stratton, Toro, Cub Cadet, Snapper, MTD, and Simplicity.

This genuine OEM replacement part is a rocker cover gasket for a wide variety of Briggs & Stratton engines. A rocker cover gasket seals oil into the camshaft. The camshaft (or rocker) is the part of an engine that translates the up and down piston movements into rotational movements to turn the crankshaft. While the engine is running, there is a flurry of motion that requires a lot of oil in the camshaft. The rocker cover helps keep all this oil inside the proper places, but it needs a gasket to help seal everything in place. Engines produce a lot of heat and after prolonged use, a gasket will warp or break. When this happens, oil will begin leaking from the engine. An obvious sign of this is if the engine begins burning bluish grey smoke and seems to be going through oil at a faster-than-normal rate. This part is sourced from the original manufacturer and ships individually.