Parts for Mtd 12A-979L402: 21" Deck / Handle / Front Axle Cover Parts

This is a control housing kit that is designed for use on many lawnmowers. It is a kit that contains three different plastic housings. Each of these parts is used to secure the handle controls onto the upper handle for security and protection. The components are durable but can be damaged, become broken, or experience wear and tear. When this happens, the country housing kit should be used to replace the parts.When replacing the control housings on a lawnmower, a screwdriver will be needed. A pair of work gloves can also be useful for this project process. Make sure the lawnmower is powered off and located on a level surface. Disconnect the spark plug wire to ensure the engine does not turn on while making this project. Locate the broken housing and unscrew it from the tool before replacing it with a new component from the kit. Test the lawnmower before use.The control housing kit is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is made to be compatible with lawnmowers manufactured by MTD, Cub Cadet, Troy-Bilt, Yard Machines, and Yard-Man.

This tooth rack gear insert is a genuine MTD part, sold individually. This tooth rack gear insert can be used as a replacement part in a lawn mower. The purpose of a tooth rack gear insert in a lawn mower is to work in conjunction with other gear parts to transfer rotational motion into linear motion, which facilitates the inner mechanisms of the appliance to propel it forward for typical operation.The tooth rack gear insert in a lawn mower might be subject to damage that could negate or reduce its functionality within the inner workings of the appliance. If the tooth rack gear insert is subject to damage in the form of scraping, puncturing, warping, or general wear and tear from long-term use, the tooth rack gear insert should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This tooth rack gear insert is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Troy-Bilt.

This is a control housing kit that is designed for use on many lawnmowers. It is a kit that contains three different plastic housings. Each of these parts is used to secure the handle controls onto the upper handle for security and protection. The components are durable but can be damaged, become broken, or experience wear and tear. When this happens, the country housing kit should be used to replace the parts.When replacing the control housings on a lawnmower, a screwdriver will be needed. A pair of work gloves can also be useful for this project process. Make sure the lawnmower is powered off and located on a level surface. Disconnect the spark plug wire to ensure the engine does not turn on while making this project. Locate the broken housing and unscrew it from the tool before replacing it with a new component from the kit. Test the lawnmower before use.The control housing kit is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is made to be compatible with lawnmowers manufactured by MTD, Cub Cadet, Troy-Bilt, Yard Machines, and Yard-Man.

This is a control housing kit that is designed for use on many lawnmowers. It is a kit that contains three different plastic housings. Each of these parts is used to secure the handle controls onto the upper handle for security and protection. The components are durable but can be damaged, become broken, or experience wear and tear. When this happens, the country housing kit should be used to replace the parts.When replacing the control housings on a lawnmower, a screwdriver will be needed. A pair of work gloves can also be useful for this project process. Make sure the lawnmower is powered off and located on a level surface. Disconnect the spark plug wire to ensure the engine does not turn on while making this project. Locate the broken housing and unscrew it from the tool before replacing it with a new component from the kit. Test the lawnmower before use.The control housing kit is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is made to be compatible with lawnmowers manufactured by MTD, Cub Cadet, Troy-Bilt, Yard Machines, and Yard-Man.

This part is a drive cable that is used on lawnmowers. The drive cable connects the handle drive control level to the lawn mower transmission and is what engages the transmission to move the lawnmower forward.A new drive cable may be needed if the lawnmower will not move forward with the self-propel feature. If any part of the drive cable is cracked, broken, or damaged in any way, it will need to be replaced, especially if it is impeding the operation of the lawnmower. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This drive cable is a genuine MTD part. It is sold individually. This specific drive cable is compatible with lawnmowers that are manufactured by MTD, Craftsman, Husky, and Yard Machines.

This replacement part is a nut, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Nuts are a small part found in many different types of machinery and are used to connect different parts and secure things together.A new nut might be needed if the current ones are missing or damaged in any way. It is common that nuts become stripped overtime and might get stuck or fall out of place. In this case, it is recommended that the nut be replaced. Be sure to review the specific owner's manual for more information on how to replace the nuts. This part is sold as an individual piece. Be sure to purchase the correct amount as many different machines use more than one during operation. This is also a genuine OEM replacement part sourced directly from the manufacturer.

This throttle housing is meant to provide users with a comfortable method of grabbing and controlling the throttle on the several different types of yard equipment machines. The throttle housing is made from plastic, and it is exposed to the elements and other dangers while being used and in storage. The housing could become cracked, broken, or damaged in other ways that would require a repair. The replacement of the throttle control is easy and can be done with only a screwdriver. This is a genuine OEM throttle housing replacement. It is sold individually and does not include the cable, trigger, spring, or screws. The housing can work for models of edger, snowblower, and Lawn Mower. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut. Buyers in search of throttle housing should make sure it will work with their make and model.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a lawn mower. The control cable allows the user to control when the mower starts and stops.The control cable might need to be replaced at some point within the typical lifespan of a lawn mower; this can occur if the control cable is sufficiently frayed, torn, ripped, scraped, or otherwise damaged to the point that it does not work in conjunction with engagement from the operator. If this malfunctioning or state of disrepair occurs, the control cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This control cable is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Craftsman, Yard Machines, and Cub Cadet.

A star knob connects the upper and lower handles on an outdoor appliance, and if removed, the upper and lower handles are quick-released. This part is made of black heavy-duty black plastic, and the threads are made of steel. Over time, the threading can become worn out, making the connection loose, and causing the two handles to no longer stay in place. Star knobs are a straightforward repair that can be done in a matter of minutes. Just unscrew the original, damaged knob and screw in the new knob. The knob is designed to be unscrewed by hand, so there is no need for additional tools to make this repair. This genuine OEM replacement part is designed for a variety of outdoor appliances, including lawnmowers, edgers, chippers, tractors, trimmers, and cultivators. This star knob is compatible with Yard Machines, Yard-Man, Cub Cadet, Bolens, Craftsmen, and Ryobi products. This part ships individually.

This replacement curved hd. screw is also known as a carriage bolt. The screw can be used on many types of lawn and garden equipment. The purpose of the screw is to hold and support the upper and lower handles of the machine. It works along with the hand knob to help secure the handles, but buyers should know that the knob is sold separately. Owners might need to replace the carriage bolt if it has become corroded or no longer properly secures the handles. If the owner has lost the bolt, they will need to buy a new one before they can use their machine. The replacement for this part is fast and simple. This is an authentic OEM replacement curved hd. screw that is sold individually. It is for use with lawn mowers, tillers, snowblowers, wood chippers, edgers, and leaf blowers. It is compatible with certain models from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This part is a replacement rear skirt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can replace a defective or detached rear skirt in lawn mowers.The rear skirt keeps the user's feet and legs protected from any debris or grass clippings that may be kicked up by the mower during use. This part will need to be replaced if worn, detached, or rendered ineffective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular rear skirt, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This rear skirt can be used with a variety of lawn mower models manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is a trailshield intended for use in lawn mowers. The trailshield attaches to the back of the lawn mower to ensure that the user is protected from the mower's blades. Trail shields may be torn or dented by impact, causing them to become loose or fall out of place. For safety, if this occurs, this part should be replaced as soon as possible. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a mulch cover and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Mulch covers are found on different types of lawn mowers and are able to help protect the main area of the machine as well as the user from mulch and other debris that could fly about during use. A new mulch cover might be needed if the current one is visibly damaged or missing. It is possible that rough debris can come in contact with this part and can cause normal damages. This can include being dented, cracked, or chipped. This cover is made of a durable plastic and should last a long time. This should be a simple repair and not require any additional tools. This replacement part is sold individually and is sourced directly from the manufacture. This part is a genuine OEM replacement part.

This is a genuine wing nut replacement designed for use in select walk-behind lawn mowers. Although some wing nuts are considered standard hardware on lawn mowers and other equipment, this specific wing nut connects to a bolt and secures the front baffle to the deck of the mower. Over time, this plastic wing nut can crack, fall off, or the threads may become damaged. This will result in the mover assembly being affected and the unit may not be able to be used until the nut has been properly replaced. This genuine replacement part will provide the exact fit for compatible mowers. This genuine OEM wing nut is manufactured to exact standards and comes from MTD. It can be used with hundreds of walk-behind lawn mower models from the brand, as well as those from Cub Cadet, Ryobi, Troy-Bilt, Bolens, Yard Man, Yard Machines, and Huskee. This plastic wing nut is sold individually. The carriage bolt that it connects to will need to be purchased separately if that also needs to be replaced. No tools are required for this installation, as it can simply be hand-tightened into place. Wear gloves for hand protection when performing equipment repairs.

Carriage bolts are flat-tipped with round heads, and their function in small engine appliances is to fasten together components and to secure that connection with a nut. There are various reasons that a carriage bolt might have to be removed and replaced, among them misplacement of the small, easily lost part. Other reasons to replace a carriage bolt could include damage or erosion that prevents the bolt from attaching the materials to one another effectively. If a carriage bolt is subject to this kind of damage, it should be replaced before using the small engine appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This genuine MTD carriage bolt can be used as a replacement part for several different kinds of appliances that require small engines, including lawnmowers, snowblowers, wood-chippers, tillers, string trimmers, leaf blowers, and edgers. The OEM carriage bolt is compatible with the following brands: Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. This part is sold individually.

This replacement part is a cable pulley intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Cable pulleys control the speed of the lawn mower. The user is able to use the cable pulley to control the speed of the machine throughout use.A new cable drive might be needed if the current one is snapped, broken, or damaged. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This spring washer has a conical shape with an open center. It has a shape like a traditional washer but is smaller than a typical coiled spring. These washers can handle a larger load than a coiled spring and are used in lawn and garden equipment to cushion heavy loads. Over time, these washers can experience wear and tear which will lead to damage or breakage. When this occurs, the spring washer will need to be replaced.Visually inspect the spring washer for damage like scratches, breaks, and dents. If these occur or the washer is warped, it needs to be replaced. The process involves removing the nut or screw above the washer with a screwdriver or other tool. After accessing the spring washer, it can be removed and a replacement part can be added to the equipment. Reassemble the parts and the equipment should work again.This is a genuine OEM spring washer replacement part that is sold individually. It's sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, string trimmers, and edgers by Craftsman, MasterCut, Toro, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD.

This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.

The roller cable guide is designed for use with lawnmowers. It supports and guides cables to the lasher in the mower.This roller cable guide is a genuine OEM part sourced directly from the manufacturer and is sold individually. This roller cable guide is compatible with the following brands: Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, and Yard-Man.

This bowed washer is a genuine MTD part, sold individually. This bowed washer can be used as a replacement part in a lawn mower. The purpose of the bowed washer in a lawn mower is to serve as a component within the general fastening mechanisms of the lawn mower so that friction can be reduced between two or more components and spacing is created between the components.The bowed washer in a lawn mower might have to be completely replaced at one or more points within the typical lifespan of the lawn mower; this could occur if the bowed washer is damaged from general wear and tear with long-term use or has been lost or misplaced. If the bowed washer has been stripped away or has fallen out of its place and cannot be found, the bowed washer should be replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bowed washer is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Craftsman.

This is a genuine OEM wheel sourced directly from the manufacturer for use on walk-behind mowers. It is one of the two rear wheels. If a wheel is damaged or lost, the lawnmower will not be operable. The wheels should be inspected prior to use to make sure they are functioning properly. If not, they should be replaced. This replacement takes approximately 10 minutes to complete. A socket set and screwdriver can be used to remove and replace the wheel. Before starting, disconnect the spark plug to ensure the mower is not accidentally started. Place the mower on wheel chocks and remove the damaged wheel. Install the new wheel and tighten using the socket set. Reinstall the spark plug and lower the lawnmower to the ground. Push the lawnmower to make sure the wheel is secure.This wheel is a solid black plastic wheel that is sold individually. It is a one-piece wheel with a rim included. It is designed to be compatible with lawnmowers manufactured by Troy Bilt, Yard-Man, and MTD.

This is a pawl that can serve as a replacement for some mower models, as well as chippers and shredders. The pawl attaches to the ratchet pawl plate. The pawl is essential for starting the engine. When the starter turns, the pawl is forced outward and locks onto the flywheel, allowing the engine to start. When the starter rope is let go, the springs pull back the ratchet pawls. If there is damage to the pawl, the engine will not start.The piece is made from durable metal, and it is built to last. However, it can start to wear down over time. Additionally, there is the potential that it could corrode. If there are issues with the pawl, replace them as soon as possible to ensure their machine continues to operate properly.This pawl can work with select models from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. The piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This replacement part is a ratchet wheel, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Ratchet wheels are commonly found in many types of machinery. The ridges around the wheel allow for continuous motion in one direction, while completely prevention any kind of motion in the other direction. This is an important part of many type of lawn mowers. A new ratchet wheel might be needed if the current one is visibly worn down or damaged in any way. If the user notices unfamiliar sounds coming from inside the machine, then the ratchet wheel might not be turning in the complete right direction. Be sure to wear work gloves while replacing this part as the wheel itself might be sharp. This replacement part is sold individually. Note that it is a genuine OEM part sourced directly from the manufacturer.

This part is a hex cap screw that is used on a variety of outdoor power equipment. A hex cap screw is used to fasten components together securely. The head of the screw is shaped like a hexagon, hence the name "hex cap screw."A new hex cap screw may be needed if the current one is stripped, broken, or missing. Since screws are such a small component, it is important to place them in a safe place so that they are not lost. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This hex cap screw is a genuine Husqvarna part. It is sold individually. This particular hex cap screw is compatible with chippers, shredders, lawnmowers, lawn tractors, snowblowers, and vacuums that are manufactured by the following brands: Husqvarna, Craftsman, Bolens, Husky, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This replacement part is a hubcap. This is a genuine replacement part made by MTD. A hubcap attaches to the wheel of many different lawn mowers and is able to keep the part in place and secure during use. This part is also used for aesthetic purposes. A new hubcap might be needed if the current one is missing or damaged in any way. This can be caused by wear and tear after normal use or from a single incident. If the part is worn down in any way, be sure to replace it as soon as possible. Refer to the specific user manual before attempting to replace this part. It is also recommended that the engine be completing shut down. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This wave washer is a genuine MTD part. It is manufactured as a replacement part for lawn mowers, push mowers, mulching mowers, and walk-behind mowers. It can also be used with edgers and leaf blowers or vacuums. The washer aids with fasteners as well as making the machine easier to operate.Washers are designed to bear the brunt of some of the wear and tear of the machines. Therefore, it is not uncommon to need to replace them. If making a repair that requires disassembly of the mower, it is recommended to have compatible screws and washers on hand as well. This wave washer is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually, though there are many of them on these machines, so be sure to buy the appropriate amount. It is compatible with equipment manufactured by ACE, Bolens, Cub Cadet, Husky, MTD, Yard-Man, White Outdoor, Columbia, Statesman, MasterCut, Platinum, Yard Machines, Crafstman, and more.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.

This genuine replacement part is a MTD flat washer flange sized .339 X .640 inch X .033 inch. This MTD flat metal washer flange has a variety of applications for many types of equipment including lawn mowers, snow blowers, tillers, edgers, and log splitters. Washers are important to the proper functioning of the product. They spread the load of a threaded fastener, such as a bolt or nut, or can be used as a spacer. However, they can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This MTD flat washer flange has multiple applications in a wide range of products from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery, Wards, Bolens, Yard-Man, Turf King, MasterCut, and more. Please note: original part number 166763 is now obsolete, and manufacturer has replaced the original part number with this part.

This genuine replacement part is a MTD screw ab-tap sized 5/15-14 x .75 inch. This MTD screw ab-tap has a variety of applications for many types of lawn and garden equipment including lawn mowers. This screw is important to the proper functioning of the product, and has a variety of applications depending on the model of the product. This screw is used to fasten or hold parts of the equipment together. However, screws can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper or unsafe operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually.This screw ab-tap has multiple applications in a wide range of products from MTD, Cub Cadet, Yard Man, Troy-Bilt, Yard Machines, Craftsman, and more. A screwdriver is required for proper installation of this part. Please note: original part numbers 1660664, 710-1001, 910-1001, 910-1242 are now obsolete, and manufacturer has replaced the original part number with this part.

This block bushing is a genuine MTD part, sold individually. This block bushing can be used as a replacement part in a lawnmower. The purpose of the block bushing in a lawnmower is to facilitate the ease of rotational movement while also fastening to one or more components of the internal machinery of the lawnmower. The components of a block bushing are the bearing in the center, the holes for fastening, and the housing unit.This replacement will be necessary if the block bushing suffers enough damage to render it beyond functionality. This damage could occur from general wear and tear over long-term use, overexposure to inclement weather, or an accidental collision with a hard object such as a rock, a curb, or a landscaping block.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This block bushing is compatible with the following outdoor appliance brands: MTD and Craftsman.

This screw is a hex wash head screw. It is a genuine MTD part. It is a replacement part for various makes and models of lawn mowers, snowblowers, edgers, and other equipment. A screw is a type of fastener, and as such, there are many screws on these appliances.Screws may become worn over time through normal wear and tear. In addition, screws can become stripped when making another repair, so it is a good idea to have compatible screws on hand in case. This hex wash head screw is made of durable metal.This screw is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually, though there are many screws located on these types of equipment. It is made to be compatible with equipment manufactured by MTD, Yard Machines, Bolen, Troy-Bilt, Craftsman, Husky, Cub Cadet, and many others.

This is a genuine replacement front axle Y cover for a lawn mower. The front axle Y cover protects the front axle from any damage due to wear. It is held by two or four bolts that attach it to the deck. It can increase the lifespan of a lawn mower by protecting the axle. Over time, the cover or the bolts securing it to the deck can deteriorate, necessitating replacement.Replacing the front axle Y cover is a simple process. It will require a flat head screwdriver, socket extension, 3/8 inch socket. Remove the previous axle cover by removing the bolts underneath the deck. Then, line up and attach the new front axle Y cover to the deck and fasten the bolts. New bolts are not included with this replacement part. If the bolts attached to the current front axle Y cover are also worn or damaged, bolts can be purchased separately. This is a genuine OEM part and is sold separately.

This v-belt is a genuine MTD part, sold individually. This v-belt can be used as a replacement part for a lawnmower. This v-belt facilitates rotation so that power is directed to the wheels and the mower deck. The v-belt works in conjunction with the small engine to power the lawnmower.Visible signs of damage include punctures, tears, scratches, rips, and erosion to the material that could prevent it from properly facilitating rotation in the lawnmower. If this occurs, the v-belt should be removed and replaced with this genuine OEM replacement part before using the lawnmower again.This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Yard Man, Troy-Bilt, and Cub Cadet.

This pulley assembly is a genuine MTD part, sold individually. This pulley assembly can be used as a replacement part in a lawn mower. The purpose of a pulley assembly in a lawn mower is to facilitate the rotation of the drive belt such that the wheels of the lawn mower can be rotated to propel the appliance forward across a variety of surfaces while in use.The pulley assembly in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance if the pulley assembly or the general components around it suffer damage that renders it incapable of performing its usual function. If the pulley is significantly damaged to that point, the pulley assembly should be removed and replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This pulley assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

This replacement part is a washer. It is a genuine replacement part made by MTD. Washers are small but important components, allowing spacing in between certain parts near and around the engine. Washers are typically used alongside screws and nuts to provide a tight and secure fit of many different parts in the appliance.A new washer might be needed if the current one is damaged or missing. Washers need to be replaced as they become stripped. This is usually due to friction inside the machine. Be sure the engine is turned off before replacing this part. Typically washers are easy to replace and might only need a screwdriver during the repair. This washer is a genuine OEM replacement part. Note that it is sold individually. Be sure to purchase the correct amount as some machines require more than one.

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.

The blade support is found between the blade and the bolt. As its name suggests, it is designed to provide support for the blade to ensure it is secured to the base of the mower deck. It is made of metal and it will need a replacement if it becomes worn or damaged. To replace a blade support or blade spacer, first, the engine needs to be cool. Remove the wire and boot from the spark plug. Tip the mower back on its handle assembly and use a piece of wood or sturdy object to hold the cutting blade in place. Remove the old blade support and blade. When installing the new one, ensure that the blade's sharp edge faces away from the mower deck. Re-thread and torque the bolt between 40 and 50 ft-lbs. This is an original OEM replacement part for lawnmower blade support made by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, MasterCut. It is sold individually.

This hex screw can be used as a replacement part for the small engine of a lawn mower or a lawn tractor. The hex screw is a fastener with a six-sided head that is responsible for fastening components to one another. A hex screw might be lost or misplaced, which is a frequent occurrence in small engine appliances as a result of long-term usage. Hex screws are easily lost and misplaced as they are small components that do not necessarily cause damage upon unscrewing unless it results in the materials coming loose. If this is the case, or if the hex screw suffers from impact or corrosion to the metal material, the hex screw should be removed and replaced with this genuine OEM replacement for lawn mowers and lawn tractors. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This hex screw is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Bolens.