Parts for Ge CFE28UP2MNS1: Dispenser Door Parts

If your refrigerator's single-serve brewer won't brew or produces weak coffee, this brew module assembly routes water through coffee pods to restore function.

Fix a refrigerator that won't respond to controls or cycle properly. This main electronic control board manages all functions and user settings.

This standoff speaker mounts and positions the appliance speaker assembly to ensure secure sound output and prevent vibration contact. It helps maintain proper spacing between the speaker and cabinet for clean chimes and alerts. What it does:

• Provides a stable mounting spacer for the speaker assembly to reduce rattles and vibration noise
• Keeps the speaker properly aligned so chimes and alerts sound clearly
• Prevents the speaker from contacting the cabinet or other components
• Commonly replaced when the original standoff is cracked, broken, or missing

• Intended for use with compatible appliance speaker assemblies;
• Remove power to the appliance before replacing parts to avoid shock or damage
• Use appropriate hand tools; avoid overtightening fasteners to prevent cracking the standoff

The Silicone & Mesh Tube with Clamps is an OEM part for GE refrigerators. It ensures a secure and leak-free connection on the dispenser system. 

Causes of a bad silicone and mesh tube with clamps can include wear and tear over time, exposure to extreme temperatures, or damage due to accidental impact or mishandling.

Symptoms of a bad silicone and mesh tube include:

• Leaks or drips from the dispenser system.
• Reduced water flow or inconsistent ice production.
• Difficulty in dispensing water or ice.

Replace your worn-out or damaged silicone and mesh tube with clamps with this genuine OEM part to restore your refrigerator's dispenser system. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.

The mullion hinge spring is a small coil spring that provides tension to the hinged mullion flap or divider between two refrigerator doors or compartments, keeping it pressed firmly closed when not in use. It ensures a proper seal and prevents cold air from escaping between the doors. Replace this part if the mullion flap hangs loosely, does not spring back into position, or you notice warm spots or frost buildup near the center divider of your refrigerator.

Guides the center door mullion spring pivot for smooth flap operation. Replace if worn or damaged to maintain proper door seal. Verify fit with model.

Trim cap that covers the refrigerator door hinge hardware. Replace if cracked, broken, or missing to protect the hinge and restore a finished look.

If your control panel is cracked, scratched, or unreadable, this display cover lens protects buttons and indicators. Simple snap-in install restores clarity.

Fix leaks or no water flow to your dispenser and ice maker. This flexible inlet line restores reliable water supply. Moderately easy DIY repair.

Plastic clip for bottom-mount refrigerators. Secures shelves, bins, or interior components. Replace if broken, cracked, or missing to restore stability.

Fix a dark refrigerator interior with this LED light and cover assembly. Restores bright, energy-efficient lighting to clearly see stored food items.

Display assembly for refrigerator K-cup brewing station. Mounts to fresh food door and provides graphic control panels. Replace if cracked or non-functional.

This small return spring provides the tension needed for a lever, latch, or flap mechanism in select refrigerators, helping the component move smoothly and snap back to its correct resting position after use.

• Restores proper tension so the linked mechanism operates smoothly and returns to neutral
• Helps doors, latches, or levers close or engage consistently
• Typical failure signs: weak or missing spring force, parts that don't spring back, poor closure, or rattling
• Replacing a fatigued spring can improve feel and reliability of the mechanism

• Disconnect power; turn off the water supply if working near dispenser or ice components
• Note spring orientation and take reference photos before removal
• Use needle-nose pliers and control stored tension to avoid injury
• Inspect related clips, pins, or brackets and replace if worn

Fix random dispensing or unresponsive water/ice dispenser. This paddle switch assembly restores reliable control when you press the dispenser lever.

Size: 8 - 18 ab.

If your refrigerator has warm spots or uneven cooling, this air damper door assembly regulates airflow between freezer and fresh-food sections. DIY repair.

Fix ice clumping or frost buildup in your dispenser. This spring returns the ice chute door to closed position, maintaining a tight seal. Easy repair.

The Motor Duct Door is an OEM part for GE refrigerators. It is the cover that houses the evaporator fan motor and ductwork in the refrigerator. The motor and ductwork circulate cold air throughout the unit to maintain even temperatures for food storage.

Causes of a bad motor duct door can include failed seals that compromise cooling performance or damage to the door and hinges that prevent proper opening and closing. 

Symptoms of a bad motor duct door include: 

• Warm or lukewarm air inside the refrigerator sections  
• Improper airflow causes warmer or colder spots
• Difficulty opening or closing the duct door

Replacing with this genuine GE OEM part allows for optimal air circulation throughout the refrigerator. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

Replacement bottom ice bin for refrigerator door storage. Installs in lower door ice section. Replace cracked, warped, or missing bins to restore secure storage.

Top-left refrigerator door bin for models with in-door ice. Replaces cracked, broken, or missing bins to restore secure storage and organization.

Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.

Set screw for refrigerators. Secures components in place throughout your appliance. Replace if stripped, missing, or damaged during repair work.

Trim piece that reinforces the port opening on refrigerators. Secures tubing connections for proper alignment and a finished look. Replace if cracked or missing.

Fix water leaking from your refrigerator dispenser with a new port gasket. This seal prevents drips and moisture around the dispenser opening.

Seals the refrigerator fresh food compartment door to maintain temperature and prevent warm air entry. Replace if torn, cracked, or loose. Verify fit.

Fix a refrigerator door that won't close or seal properly with this left-hand door closure assembly. Restores alignment and maintains consistent cooling.

Secures the ice and water tray in your refrigerator to prevent shifting and rattling. Replace this guard assembly if yours is cracked, broken, or missing.

Stainless steel drip tray for your refrigerator's single-serve dispenser. Replaces cracked, stained, or missing trays to keep your unit clean.

Ice maker not releasing cubes properly? This tray lock lever secures the ice tray during the harvest cycle. Common fix for ice jams and incomplete ejection.

Fixes dim or uneven refrigerator lighting. This LED light shield replaces cracked or yellowed covers to restore proper light distribution. Simple DIY fix.

8-18 hi/lo 5/8

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This USB port cover replaces a broken or missing cover on the appliance control panel to protect the USB connector from dirt and moisture. It restores a finished appearance and helps keep the port functional. What it does:

• Covers and protects the appliance USB port from dust, moisture, and accidental contact
• Prevents debris from entering the connector, reducing risk of connectivity issues
• Restores the control-panel appearance when the original cover is cracked or lost

• Disconnect power to the appliance before servicing to avoid shock or damage
• Accessible from the control panel; typically snaps into place or secures with small fasteners
• Inspect surrounding trim for damage and replace any broken clips to ensure a secure fit

Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.

Center mullion hinge for bottom-mount refrigerators. Mounts between refrigerator and freezer doors to support door alignment and closing. Replace if cracked or broken.

Refrigerator mullion hinge allows the center flipper rail between doors to pivot smoothly. Replace if doors don't seal, mullion is loose, or condensation forms. Confirm fit by model number.

Round-head sheet metal screw (10-24 x 5/8) secures trim, panels, and internal components in refrigerators. Replace if missing, stripped, or corroded.

Hinge-mounted stop that limits how far your refrigerator door can swing open. Replace if cracked, broken, or missing to prevent door overextension.