Parts for Ge CVE28DP4NDW2: Dispenser Door Parts

This gray articulating mullion provides the center trim and hinge assembly that lets French-door or side-by-side refrigerator doors pivot and seal properly. Restores door alignment and helps the doors close evenly for a better seal. What it does:

• Replaces the center mullion that connects and supports the door edges for proper closing
• Restores hinge movement so doors open and close smoothly without binding
• Helps improve door seal alignment to reduce cold air loss from the cabinet
• Commonly used when the mullion or hinge is cracked, loose, or bent

• One gray articulating mullion assembly with hinge components as shown

• High-level replacement; remove power to the appliance before starting
• Support both doors during removal/installation to avoid dropping or damaging doors
• Use appropriate tools and follow OEM diagram for hinge screw locations and torque

LED light assembly for refrigerator convertible or freezer drawer compartments. Replaces cracked, broken, or non-illuminating drawer lights.

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

Left-side door stop for bottom-mount refrigerators. Prevents door from overextending and maintains proper door alignment. Replace if cracked or missing.

Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

Replaces cracked, faded, or missing upper left door bin in your refrigerator. Durable molded plastic shelf secures condiments and bottles on door.

Tinted door bin for the center-left position of your refrigerator. Replace a cracked, faded, or missing shelf to restore secure bottle storage.

Tinted lower left door bin for bottom-mount refrigerators. Replaces cracked, broken, or missing bins to restore secure storage for bottles and containers.

Trim piece that reinforces the port opening on refrigerators. Secures tubing connections for proper alignment and a finished look. Replace if cracked or missing.

Fix ice dispensing issues with this ice funnel duct door and motor assembly. Solves problems with ice not dispensing or jamming in the chute mechanism.

Replaces a cracked, broken, or missing duct door in your refrigerator's air circulation system. This plastic door controls airflow between compartments.

The Duct Door Motor is an OEM replacement part for GE refrigerators. It is designed to control the opening and closing of the dispenser door, allowing for the release of ice from the dispenser.

A bad dispenser duct door motor can occur due to various factors, including normal wear and tear, motor failure, or damage to the motor mechanism. If you notice symptoms such as the dispenser duct door not opening or closing properly, or failure to dispense ice or water, it may indicate a need to replace the dispenser duct door motor.

Symptoms of a bad dispenser duct door motor include:

• Dispenser duct door not opening or closing properly
• Failure to dispense ice or water

Restore your refrigerator's dispenser system by replacing the faulty dispenser duct door motor with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

If your refrigerator vent door won't stay closed or airflow seems irregular, this duct door spring restores proper tension. Simple 5-minute fix.

Broken or missing dispenser paddle? This exterior actuator restores ice and water dispensing function. Direct replacement part for push-button operation.

Fix an unresponsive dispenser control panel or blank door display with this refrigerator door control board. Manages dispenser functions and user inputs.

Fix a refrigerator dispenser that won't dispense water or ice with this control board. Controls autofill and dispenser valve operation for reliable delivery.

This matte white display panel is the external indicator and user interface cover for refrigerators with the auto-fill system. It restores a clean, readable dispenser/display area so status and functions are visible at a glance. What it does:

• Serves as the replacement display/face plate for the refrigerator auto-fill dispenser assembly.
• Protects and shows indicator lights and status for the auto-fill feature.
• Replaces cracked, faded, discolored, or badly scratched display lens/cover.
• Helps restore a clear viewing surface when dispenser indicators are hard to read.

• Disconnect power to the appliance before beginning any repair.
• Handle the plastic display gently to avoid scratching or cracking; avoid touching electrical contacts.
• Installation typically requires removing the dispenser bezel or front panel—save fasteners for reassembly.

The Stainless Drip Tray Cover is an OEM part for GE side by side refrigerators. It serves as the cover for the bottom drip tray in the refrigerator, allowing any spills or condensation to properly drain away while also keeping the drain area clean and hygienic. 

Causes of a bad drip tray cover can include wear and tear from repeated cleaning, damage from impact or excessive weight, or warping due to moisture. 

Symptoms of a bad drip tray cover include:

• Leaks or drips from the bottom of the refrigerator  
• An unpleasant musty smell 
• Accessible drainage area allowing for mildew or bacteria growth

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.