Parts for Ge PFE27KSDASS: 01 - Dispenser Door Parts

The mullion hinge spring is a small coil spring that provides tension to the hinged mullion flap or divider between two refrigerator doors or compartments, keeping it pressed firmly closed when not in use. It ensures a proper seal and prevents cold air from escaping between the doors. Replace this part if the mullion flap hangs loosely, does not spring back into position, or you notice warm spots or frost buildup near the center divider of your refrigerator.

This small return spring provides the tension needed for a lever, latch, or flap mechanism in select refrigerators, helping the component move smoothly and snap back to its correct resting position after use.

• Restores proper tension so the linked mechanism operates smoothly and returns to neutral
• Helps doors, latches, or levers close or engage consistently
• Typical failure signs: weak or missing spring force, parts that don't spring back, poor closure, or rattling
• Replacing a fatigued spring can improve feel and reliability of the mechanism

• Disconnect power; turn off the water supply if working near dispenser or ice components
• Note spring orientation and take reference photos before removal
• Use needle-nose pliers and control stored tension to avoid injury
• Inspect related clips, pins, or brackets and replace if worn

Replace the dispenser actuator paddle on your refrigerator when it becomes cracked, broken, stuck, or won't release properly. Installs at the front.

If your refrigerator has warm spots or uneven cooling, this air damper door assembly regulates airflow between freezer and fresh-food sections. DIY repair.

Fix ice clumping or frost buildup in your dispenser. This spring returns the ice chute door to closed position, maintaining a tight seal. Easy repair.

The Motor Duct Door is an OEM part for GE refrigerators. It is the cover that houses the evaporator fan motor and ductwork in the refrigerator. The motor and ductwork circulate cold air throughout the unit to maintain even temperatures for food storage.

Causes of a bad motor duct door can include failed seals that compromise cooling performance or damage to the door and hinges that prevent proper opening and closing. 

Symptoms of a bad motor duct door include: 

• Warm or lukewarm air inside the refrigerator sections  
• Improper airflow causes warmer or colder spots
• Difficulty opening or closing the duct door

Replacing with this genuine GE OEM part allows for optimal air circulation throughout the refrigerator. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Top-left refrigerator door bin for models with in-door ice. Replaces cracked, broken, or missing bins to restore secure storage and organization.

Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.

Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.

The Manifold & Plug Assembly is an OEM part for GE refrigerators. This assembly is responsible for housing the water filter and ensuring a proper connection to the water supply.

A bad filter manifold & plug assembly can be caused by normal wear and tear, clogging or blockage in the filter, or damage due to mishandling or impact. If you notice a decrease in water flow or water pressure, a strange taste or odor in your drinking water, or if the filter does not fit securely in the assembly, it may indicate a problem with the filter manifold & plug assembly.

Symptoms of a bad filter manifold & plug assembly include:

• Reduced water flow or water pressure
• Strange taste or odor in the drinking water
• Leaks or drips around the filter assembly
• Difficulty in installing or removing the filter

Replace your faulty manifold & plug assembly with this genuine OEM part to ensure clean and filtered water. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Seals the refrigerator compartment to keep cold air in. Replace when worn to prevent frost buildup, condensation, and temperature issues. Verify fit.

Curved door handle assembly for your refrigerator's fresh food compartment. Replace a cracked, broken, or missing handle to restore a secure grip and clean finish.

8-18 hi/lo 5/8

Ice dispenser not working or jamming? This ice bucket and auger motor assembly restores proper ice storage and dispensing. Moderate DIY repair.

Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.

The Refrigerator door board profile is an OEM replacement part for GE refrigerator doors. It is the electronics responsible for operating door functions like illumination, alarm systems, temperature displays, and sealed system sensors.

Causes of a bad control board can include moisture penetration corroding circuits over time, cracks or breaks from impact, or malfunctions in electronic components.

Symptoms of a bad control board include:

• Lights or displays failing to illuminate as intended
• Inability to adjust the temperature or access diagnostic controls
• Alarms or audio components malfunctioning
• Disruptions to the refrigeration cycle from sensor faults

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.