Parts for Kenmore 795.75043610 (79575043610, 795 75043610): Dispenser Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

This tension spring provides the restoring force for a moving component in select LG appliances, helping doors or internal mechanisms return to their resting position and maintain correct alignment. It's a small mechanical part that restores motion reliably when functioning. What it does

• Supplies tension to return or hold a moving part (door, hinge or internal linkage) in its intended position
• Restores smooth, consistent motion and helps prevent slamming or sagging caused by worn springs
• Common symptom: door or component does not return, feels loose, or has uneven movement
• Works as a direct-fit service part when the original spring has stretched, broken, or lost tension

• One spring (quantity: 1)

• Inspect the matching mounting points and hardware before installing; replace any damaged clips or pins
• Use care when removing/installing under tension; wear eye protection and follow safe-handling practices
• Only install the part in appliances that list the same part number/location; do not force mismatched parts

This replacement lever spring restores tension to a lever-style mechanism so the lever returns and operates reliably. Use it when a worn spring causes the lever to stick, slip, or fail to engage properly. What it does

• Replaces the worn or weakened spring in a lever assembly to restore proper return tension
• Helps prevent the lever from sticking, slipping, or failing to stay engaged
• Restores consistent mechanical movement for reliable operation
• Reduces intermittent or flaky lever behavior caused by a damaged spring

• Disconnect power to the appliance before starting any repair
• Inspect the lever assembly and mounting points; replace only the spring explicitly listed
• Use appropriate hand tools and pliers; avoid overstretching the spring during installation

This lever spring is a small replacement tension spring that restores proper return and engagement for a lever assembly. It helps maintain reliable lever movement and secure latching where a worn or broken spring causes play or non-return. What it does:

• Provides return tension for a lever or latch assembly so the lever snaps back into place
• Helps maintain proper engagement of latch/actuator mechanisms
• Common remedy for a loose, sagging, or non-returning lever
• Works as a direct-fit replacement when the original lever spring is damaged or fatigued

• One replacement lever spring

• Disconnect power and/or unplug the appliance before starting any disassembly
• Handle small springs carefully; keep track of orientation and any retaining clips during removal
• Installation may require partial disassembly of the trim or latch assembly

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This funnel directs dispensed water or ice from the appliance's dispenser into your cup or container to reduce spills and ensure proper flow. It replaces a worn, cracked, or misaligned chute to restore clean dispensing. What it does:

• Guides water or ice from the dispenser to the user's cup or container
• Prevents drips and reduces splashing at the dispenser opening
• Helps position dispensed items so they clear the dispenser housing
• Addresses symptoms like leaking at the dispenser, uneven flow, or pieces falling inside the dispenser well

• One replacement funnel shown

• Disconnect power and water supply before starting any work
• Remove dispenser or front panel per your model's service instructions to access the funnel
• Align the funnel carefully with the mounting tabs and snap or fasten into place without forcing
• If clips or seals are damaged, replace them to ensure a secure, leak-free fit

This button assembly replaces a damaged or worn control-panel button cluster to restore reliable button response and user control. It fits into the appliance's console and provides the tactile interface needed to select cycles and settings. What it does

• Replaces the control-panel button cluster so unresponsive, stuck, or missing buttons can be fixed.
• Restores tactile feedback and reliable electrical contact for user inputs.
• Helps resolve intermittent or non-working button inputs when the switch/buttons are the cause.
• Matches the OEM form to fit into the factory console opening.

• Disconnect power (and water, if applicable) before starting any repair.
• Access typically requires removing the console or control panel.
• Handle the assembly and ribbon/contact connectors carefully to avoid damage.

This communication link module provides the refrigerator's control board with network and user-interface connectivity so features and diagnostics can be accessed and controlled. It helps restore lost app or panel communication. What it does:

• Handles communication between the refrigerator's control system and external interfaces (user panel, network app).
• Works with the main control electronics to transmit status and diagnostic information.
• Replaces a damaged or non-communicating module that prevents remote control or smart features.

• One link (communication) module.

• Disconnect power to the appliance before replacing this electronic module to avoid shock or damage.
• Handle the module by its edges and avoid touching circuit contacts.
• Installation typically involves removing an access panel and unplugging/reconnecting a wiring harness; keep track of screw and connector locations.

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.