How to Troubleshoot & Replace Bosch AP3859061 / 00600027 Button

I ordered a new Panel/Facia and bought replacement buttons just to be safe. All were pretty easy, but two things to BE CAREFUL about that are important. First, watch the videos about how to remove and replace the facia panel because if you do it improperly you will easily break the plastic tabs and be screwed. Secondly, The five-button MUST BE INSTALLED IN THE RIGHT ORDER. They are different from each other and the DW will not work if you don't notice that, they have letters that are stamped on them and on the spots they go in the panel. Because I missed that detail, I kept thinking I had gotten them in a bind somehow snapping it in place, but they were out of order. Otherwise, if I had to do it again, it would only take me about 15 minutes. 

I replaced the panel fascia and handle strip. I ordered the buttons in case they needed to be replaced also. The hardest part was replacing the bottom part of the door front. Another hand would have been nice, but I made it work. It took about an hour total. 

Removed broken one and replaced it with a new one. 

Order parts by Model # and came fitting perfectly. Keep hardware endless as the pieces don't come with it. If you need the hardware make sure to order that as well. 

Ordered the parts and works just fine. 

Ordered panel door handles and on/off button. I called your company spoke with a sales person who helped me find the part numbers and explain how everything worked. I had special delivery, and when it arrived, it took me about 15 minutes to repair. 

Parts ordered and replaced. 

Ordered parts which was easy to match up with help from AppliancePartsPros.com Shipped fast and was easy and fast to repair. 

Ordered the parts and installed very satisfied with the service and parts. 

I just removed the metal panel by unscrewing the Torx screws from the backside. The fascia is held on by 2 torx screws on the front. It's a bad design as someone else stated. Replaced the buttons on the new fascia and reattached all. The serial number/model number sticker that was on the right side of the door was gone, so I found the part number of the fascia/handle on the back of the part. I used that with a quick google search and found the part here. The fascia does not come with buttons or the silver handle. The handle can be removed easily by placing the fasica on a hard service, placing a screw driver horizontally on the center tab and giving it a quick tap with a hammer to pop it off.