Stephen M Beaufort , SC October 30, 2019 F30 Replaced the clock/timer control panel. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Greg Y Cedar Hill , MO December 21, 2018 Oven would not heat at all Replaced control board Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Ronald S Monson , MA July 22, 2018 First the heating element for baking burned out, so I replaced it with a new one. Went to heat the oven up, no heat with new element so I still had another problem. So after replacing the heating element for baking and having it not work. I still had the broiler element working, I switched the wires on the back of the control board to see if the baking element would heat up on the broiler setting and it did. So that narrowed it down to the control board being bad. So I replaced the control board and also the overlay with it. My oven is back in business. For some reason the control board relay for baking must have shorted out when the baking element burned out. Oh well thanks to AppliancePartsPros.com my oven is working again and it was a very easy fix to do your self. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Thomas H Easley , SC October 08, 2017 Appliance: Frigidaire Electric Range GLEF379DCB Range had no display and oven was inoperative Replaced the oven timer Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Jack R Newalla , OK April 04, 2017 F10 error on frigidaire oven and run away temperature I replaced the Clock Timer (Electronic Oven Control) and the overlay. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
William N Fort Lauderdale , FL January 08, 2017 Appliance: Frigidaire Electric Range GLEFZ384GCA My clock/timer had gone I simply connect the wires to the clock timer control and that was that Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Landon R Mena , AR January 03, 2017 Brioken control board and indicator lens Replaced the control board, control board overlay and the indicator lens using a phillips screw driver, 1/4" nut driver and a pair of needle nose pliers. Took all of 15 minutes. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Kevin D Mount Carmel , IL September 11, 2016 Appliance: Frigidaire Electric Range GLEF379DQD Error code f10 excessive temp I did some testing with some of the videos on the site and came to the conclusion the EOC Electric oven control was defective the one thing strange about mine was the broiler would not shut off even though it was not turned on. I watched the video on how to replace it and decided to order it and try it. The repair was easy if you follow the instructions and it fixed the problem, oven works good as new. I reused the face plate if you are going for perfect you may want to order a new one I put a small scratch on it but it almost covered I can live with that. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers
Javan R Willow Street , PA September 06, 2016 Appliance: Frigidaire Range FEFLMC55FCB F10 error code Replaced the timer board. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Rebecca P Keyser , WV March 16, 2016 Appliance: Frigidaire Range FEFL79DQF Electronic control for bottom heat coil in oven did not work Hired a neighbor to install new part. Works great now. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers